SIST EN ISO 9311-1:2006

Adhesives for thermoplastic piping systems - Part 1: Determination of film properties (ISO 9311-1:2005)

This part of EN ISO 9311 specifies three test procedures suitable for the determination of the spreadability and film properties of solvent containing adhesives for thermoplastic piping systems. These methods do not produce directly comparable results.
One method is applicable to non-thixotropic adhesives and the other two methods are applicable to thixotropic adhesives.

Klebstoffe für thermoplastische Rohrleitungssysteme - Teil 1: Bestimmung der Filmeigenschaften (ISO 9311-1:2005)

Dieser Teil von EN ISO 9311 legt drei Prüfverfahren für die Bestimmung der Spreitbarkeit und der Filmeigenschaften von Lösemittel enthaltenden Klebstoffen für thermoplastische Rohrleitungssysteme fest. Diese Verfahren liefern keine direkt vergleichbaren Ergebnisse.
Eines der Verfahren ist nur auf nicht-thixotrope Klebstoffe anwendbar, die anderen beiden sind für thixotrope Klebstoffe geeignet.

Adhésifs pour tuyauteries thermoplastiques - Partie 1 : Détermination des propriétés des films (ISO 9311-1:2005)

La présente partie de l'EN ISO 9311 décrit trois modes opératoires permettant de déterminer l'aptitude a l'étalement et les propriétés des films d'adhésifs contenant des solvants utilisés pour les tuyauteries thermoplastiques. Ces méthodes ne donnent pas directement des résultats comparables.
Une méthode est applicable aux adhésifs non-thixotropiques, les deux autres méthodes étant applicables aux adhésifs thixotropiques.

Lepila za plastomerne cevne sisteme – 1. del: Določanje lastnosti filma (ISO 9311-1:2005)

General Information

• Status: Published
• Publication Date: 31-Dec-2005
• ICS: 23.040.20 - Plastics pipes
• ICS: 83.180 - Adhesives
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jan-2006
• Due Date: 01-Jan-2006
• Completion Date: 01-Jan-2006
• Ref Project: EN ISO 9311-1:2005 - Adhesives for thermoplastic piping systems - Part 1: Determination of film properties (ISO 9311-1:2005)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9311-1:2006
01-januar-2006
/HSLOD]DSODVWRPHUQHFHYQHVLVWHPH±GHO'RORþDQMHODVWQRVWLILOPD,62

Adhesives for thermoplastic piping systems - Part 1: Determination of film properties
(ISO 9311-1:2005)
Klebstoffe für thermoplastische Rohrleitungssysteme - Teil 1: Bestimmung der
Filmeigenschaften (ISO 9311-1:2005)
Adhésifs pour tuyauteries thermoplastiques - Partie 1 : Détermination des propriétés des
films (ISO 9311-1:2005)
Ta slovenski standard je istoveten z: EN ISO 9311-1:2005
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
83.180 Lepila Adhesives
SIST EN ISO 9311-1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9311-1:2006

---------------------- Page: 2 ----------------------

SIST EN ISO 9311-1:2006
EUROPEAN STANDARD
EN ISO 9311-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2005
ICS 83.180
English version
Adhesives for thermoplastic piping systems - Part 1:
Determination of film properties (ISO 9311-1:2005)
Adhésifs pour tuyauteries thermoplastiques - Partie 1 : Klebstoffe für thermoplastische Rohrleitungssysteme - Teil
Détermination des propriétés des films (ISO 9311-1:2005) 1: Bestimmung der Filmeigenschaften (ISO 9311-1:2005)
This European Standard was approved by CEN on 14 April 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9311-1:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9311-1:2006
EN ISO 9311-1:2005 (E)
Contents
page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Safety .4
5 Principle.4
6 Apparatus .4
7 Procedure .6
8 Expression of results .9
9 Test report .9


2

---------------------- Page: 4 ----------------------

SIST EN ISO 9311-1:2006
EN ISO 9311-1:2005 (E)
Foreword
This European Standard (EN ISO 9311-1:2005) has been prepared by Technical Committee CEN/TC 193
"Adhesives" the secretariat of which is held by AENOR, in collaboration with Technical Committee ISO/TC 138
"Plastics pipes, fittings and valves for the transport of fluids".
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by February 2006, and conflicting national standards shall be withdrawn at the latest
by February 2006.
This European Standard is one of a series of standards as listed below:
EN ISO 9311-1: Adhesives for thermoplastics piping systems - Part 1: Determination of film properties (ISO 9311-
1:2005)
EN ISO 9311-2: Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-
2:2002)
EN ISO 9311-3: Adhesives for thermoplastic piping systems - Part 3: Test method for the determination of
resistance to internal pressure (ISO 9311-3:2005)
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom


3

---------------------- Page: 5 ----------------------

SIST EN ISO 9311-1:2006
EN ISO 9311-1:2005(E)
1 Scope
This part of EN ISO 9311 specifies three test procedures suitable for the determination of the spreadability and film
properties of solvent containing adhesives for thermoplastic piping systems. These methods do not produce directly
comparable results.
One method is applicable to non-thixotropic adhesives and the other two methods are applicable to th
...