SIST EN 916:2003
(Main)Gymnastic equipment - Vaulting boxes - Requirements and test methods including safety
Gymnastic equipment - Vaulting boxes - Requirements and test methods including safety
This European Standard specifies functional requirements (see clause 3) and specific safety requirements for five types of vaulting boxes (see Table 1) in addition to the general safety requirements in EN 913.
Turngeräte - Sprungkästen - Anforderungen und Prüfverfahren einschlißlich Sicherheit
Matériel de gymnastique - Plints - Exigences et méthodes d'essai y compris la sécurité
La présente Norme européenne spécifie des exigences fonctionnelles (voir article 3) et des exigences de sécurité spécifiques concernant cinq types de plints (voir Tableau 1), en complément aux spécifications générales de sécurité de l'EN 913.
Gimnastična oprema - Švedske skrinje - Zahteve in preskusne metode, vključno z varnostjo
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gymnastic equipment - Vaulting boxes - Requirements and test methods including safetyYDUQRVWMRMatériel de gymnastique - Plints - Exigences et méthodes d'essai y compris la sécuritéTurngeräte - Sprungkästen - Anforderungen und Prüfverfahren einschlißlich SicherheitTa slovenski standard je istoveten z:EN 916:2003SIST EN 916:2003en97.220.30ICS:SIST EN 916:19961DGRPHãþDSLOVENSKI
STANDARDSIST EN 916:200301-julij-2003
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 916March 2003ICS 97.220.30Supersedes EN 916:1996English versionGymnastic equipment - Vaulting boxes - Requirements and testmethods including safetyMatériel de gymnastique - Plints - Exigences et méthodesd'essai y compris la sécuritéTurngeräte - Sprungkästen - Anforderungen undPrüfverfahren einschlißlich SicherheitThis European Standard was approved by CEN on 28 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 916:2003 E
EN 916:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Requirements.43.1Classification.43.2Dimensions.43.3Performance of padded box top.54Safety requirements.54.1General.54.2Stability.54.3Strength.54.4Durability of construction.55Test methods.55.1Determination of stability.55.1.1Principle.55.1.2Test temperature.55.1.3Procedure.55.1.4Expression of results.65.2Determination of strength.65.2.1Principle.65.2.2Apparatus.65.2.3Test temperature.65.2.4Procedure.65.2.5Expression of results.75.3Determination of durability of construction.75.3.1Principle.75.3.2Procedure.75.3.3Expression of results.76Warning.77Marking.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.