Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of flowability of ceramic powders (ISO 14629:2012)

This International Standard specifies a test method to determine the flowability of granulated or ungranulated ceramic powders by means of a specified funnel. The method is applicable only to powders which flow freely through the specified test orifice.

Hochleistungskeramik - Bestimmung der Fließfähigkeit keramischer Pulver (ISO 14629:2012)

Diese Internationale Norm legt ein Verfahren zur Bestimmung des Fließverhaltens granulierter oder ungranulierter keramischer Pulver mit Hilfe eines festgelegten Trichters fest. Dieses Verfahren gilt nur für Pulver, die frei durch die festgelegte Prüföffnung fließen.

Céramiques techniques - Détermination de l'aptitude à l'écoulement des poudres céramiques (ISO 14629:2012)

L'ISO 14629:2012 spécifie une méthode d'essai permettant de déterminer l'aptitude à l'écoulement des poudres céramiques granulées ou non granulées au moyen d'un entonnoir spécifié. La méthode s'applique uniquement aux poudres s'écoulant librement à travers l'orifice d'essai spécifié.

Fina keramika (sodobna keramika, sodobna tehnična keramika) - Določanje sipkosti keramičnih praškov (ISO 14629:2012)

Ta mednarodni standard podaja metodo preskusa za določanje sipkosti granuliranih ali negranuliranih keramičnih praškov z določenim lijakom. Metoda se uporablja samo za praške, ki so prosto pretočni skozi določeno preskusno odprtino.

General Information

Status
Published
Public Enquiry End Date
29-Nov-2015
Publication Date
16-May-2016
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
06-May-2016
Due Date
11-Jul-2016
Completion Date
17-May-2016

Relations

Buy Standard

Standard
EN ISO 14629:2016
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k FprEN ISO 14629:2015
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14629:2016
01-junij-2016
1DGRPHãþD
SIST ENV 14312:2007
)LQDNHUDPLND VRGREQDNHUDPLNDVRGREQDWHKQLþQDNHUDPLND 'RORþDQMH
VLSNRVWLNHUDPLþQLKSUDãNRY ,62
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of
flowability of ceramic powders (ISO 14629:2012)
Hochleistungskeramik - Bestimmung der Fließfähigkeit keramischer Pulver (ISO
14629:2012)
Céramiques techniques - Détermination de l'aptitude à l'écoulement des poudres
céramiques (ISO 14629:2012)
Ta slovenski standard je istoveten z: EN ISO 14629:2016
ICS:
81.060.30 Sodobna keramika Advanced ceramics
SIST EN ISO 14629:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 14629:2016

---------------------- Page: 2 ----------------------

SIST EN ISO 14629:2016


EN ISO 14629
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2016
EUROPÄISCHE NORM
ICS 81.060.30 Supersedes ENV 14312:2002
English Version

Fine ceramics (advanced ceramics, advanced technical
ceramics) - Determination of flowability of ceramic
powders (ISO 14629:2012)
Céramiques techniques - Détermination de l'aptitude à Hochleistungskeramik - Bestimmung der Fließfähigkeit
l'écoulement des poudres céramiques (ISO keramischer Pulver (ISO 14629:2012)
14629:2012)
This European Standard was approved by CEN on 18 March 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14629:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 14629:2016
EN ISO 14629:2016 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 14629:2016
EN ISO 14629:2016 (E)
European foreword
The text of ISO 14629:2012 has been prepared by Technical Committee ISO/TC 206 “Fine ceramics” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 14629:2016
by Technical Committee CEN/TC 184 “Advanced technical ceramics” the secretariat of which is held by
DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2016, and conflicting national standards shall
be withdrawn at the latest by October 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes ENV 14312:2002.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14629:2012 has been approved by CEN as EN ISO 14629:2016 without any modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 14629:2016

---------------------- Page: 6 ----------------------

SIST EN ISO 14629:2016
INTERNATIONAL ISO
STANDARD 14629
First edition
2012-10-15
Fine ceramics (advanced ceramics,
advanced technical ceramics) —
Determination of flowability of
ceramic powders
Céramiques techniques — Détermination de l’aptitude à l’écoulement
des poudres céramiques
Reference number
ISO 14629:2012(E)
©
ISO 2012

---------------------- Page: 7 ----------------------

SIST EN ISO 14629:2016
ISO 14629:2012(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the
address below or ISO’s member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 14629:2016
ISO 14629:2012(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 14629 was prepared by Technical Committee ISO/TC 206, Fine ceramics.
© ISO 2012 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 14629:2016

---------------------- Page: 10 ----------------------

SIST EN ISO 14629:2016
INTERNATIONAL STANDARD ISO 14629:2012(E)
Fine ceramics (advanced ceramics, advanced technical
ceramics) — Determination of flowability of ceramic powders
1 Scope
This International Standard specifies a test method to determine the flowability of granulated or
ungranulated ceramic powders by means of a specified funnel. The method is applicable only to powders
whi
...

SLOVENSKI STANDARD
kSIST FprEN ISO 14629:2015
01-november-2015
)LQDNHUDPLND VRGREQDNHUDPLNDVRGREQDWHKQLþQDNHUDPLND 'RORþDQMH
VLSNRVWLNHUDPLþQLKSUDãNRY ,62
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of
flowability of ceramic powders (ISO 14629:2012)
Hochleistungskeramik - Bestimmung der Fließfähigkeit keramischer Pulver (ISO
14629:2012)
Céramiques techniques - Détermination de l'aptitude à l'écoulement des poudres
céramiques (ISO 14629:2012)
Ta slovenski standard je istoveten z: FprEN ISO 14629
ICS:
81.060.30 Sodobna keramika Advanced ceramics
kSIST FprEN ISO 14629:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

kSIST FprEN ISO 14629:2015

---------------------- Page: 2 ----------------------

kSIST FprEN ISO 14629:2015

EUROPEAN STANDARD
FINAL DRAFT
FprEN 14629 rev
NORME EUROPÉENNE

EUROPÄISCHE NORM

September 2015
ICS 81.060.30 Will supersede ENV 14312:2002
English Version
Fine ceramics (advanced ceramics, advanced technical
ceramics) - Determination of flowability of ceramic powders (ISO
14629:2012)
Céramiques techniques - Détermination de l'aptitude à Hochleistungskeramik - Bestimmung der Fließfähigkeit
l'écoulement des poudres céramiques (ISO 14629:2012) keramischer Pulver (ISO 14629:2012)
This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical
Committee CEN/TC 184.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprEN 14629 rev:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

kSIST FprEN ISO 14629:2015
FprEN ISO 14629:2015 (E)
Contents Page
European foreword .3
2

---------------------- Page: 4 ----------------------

kSIST FprEN ISO 14629:2015
FprEN ISO 14629:2015 (E)
European foreword
The text of ISO 14629:2012 has been prepared by Technical Committee ISO/TC 206 “Fine ceramics” of the
International Organization for Standardization (ISO) and has been taken over as FprEN ISO 14629:2015 by
Technical Committee CEN/TC 184 “Advanced technical ceramics” the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document will supersede ENV 14312:2002.
Endorsement notice
The text of ISO 14629:2012 has been approved by CEN as FprEN ISO 14629:2015 without any modification.
3

---------------------- Page: 5 ----------------------

kSIST FprEN ISO 14629:2015

---------------------- Page: 6 ----------------------

kSIST FprEN ISO 14629:2015
INTERNATIONAL ISO
STANDARD 14629
First edition
2012-10-15
Fine ceramics (advanced ceramics,
advanced technical ceramics) —
Determination of flowability of
ceramic powders
Céramiques techniques — Détermination de l’aptitude à l’écoulement
des poudres céramiques
Reference number
ISO 14629:2012(E)
©
ISO 2012

---------------------- Page: 7 ----------------------

kSIST FprEN ISO 14629:2015
ISO 14629:2012(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the
address below or ISO’s member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

---------------------- Page: 8 ----------------------

kSIST FprEN ISO 14629:2015
ISO 14629:2012(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 14629 was prepared by Technical Committee ISO/TC 206, Fine ceramics.
© ISO 2012 – All rights reserved iii

---------------------- Page: 9 ----------------------

kSIST FprEN ISO 14629:2015

---------------------- Page: 10 ----------------------

kSIST FprEN ISO 14629:2015
INTERNATIONAL STANDARD ISO 14629:2012(E)
Fine ceramics (advanced ceramics, advanced technical
ceramics) — Determination of flowability of ceramic powders
1 Scope
This International Standard specifies a test method to determine the flowability of granulated or
ungranulated ceramic powders by means of a specified funnel. The method is applicable only to powders
which flow freely through the specified test orifice.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenc
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.