SIST EN ISO 11591:2021/FprA1:2022

Small craft - Field of vision from the steering position - Amendment 1 (ISO 11591:2020/FDAM 1:2022)

Kleine Wasserfahrzeuge - Sichtfeld vom Steuerstand - Änderung 1 (ISO 11591:2020/FDAM 1:2022)

No scope available

Petits navires - Champ de vision depuis le poste de pilotage - Amendement 1 (ISO 11591:2020/FDAM 1:2022)

Mala plovila - Vidno polje izza krmila - Dopolnilo A1 (ISO 11591:2020/FDAM 1:2022)

General Information

• Status: Not Published
• Public Enquiry End Date: 05-Jun-2022
• ICS: 47.080 - Small craft
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 5020 - Formal vote (FV) (Adopted Project)
• Start Date: 19-Aug-2022
• Due Date: 07-Oct-2022
• Completion Date: 19-Aug-2022
• Directive: 2013/53/EU - Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC
• Mandate: M/542 - [C(2015)8736] Standardisation Request to the European Committee for Standardisation and the European Committee for Electro-technical Standardisation as regards recreational craft and personal watercraft in support of Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC.
• Ref Project: EN ISO 11591:2020/A1:2022 - Small craft - Field of vision from the steering position - Amendment 1 (ISO 11591:2020/Amd 1:2022)

Relations

• Amends: SIST EN ISO 11591:2021 - Small craft - Field of vision from the steering position (ISO 11591:2020)
• Effective Date: 12-May-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11591:2021/oprA1:2022
01-maj-2022

Mala plovila - Vidno polje izza krmila - Dopolnilo A1 (ISO 11591:2020/DAM 1:2022)

Small craft - Field of vision from the steering position - Amendment 1 (ISO
11591:2020/DAM 1:2022)
Kleine Wasserfahrzeuge - Sichtfeld vom Steuerstand - Änderung 1 (ISO
11591:2020/DAM 1:2022)
Petits navires - Champ de vision depuis le poste de pilotage - Amendement 1 (ISO
11591:2020/DAM 1:2022)
Ta slovenski standard je istoveten z: EN ISO 11591:2020/prA1
ICS:
47.080 Čolni Small craft
SIST EN ISO 11591:2021/oprA1:2022 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 11591:2021/oprA1:2022
---------------------- Page: 2 ----------------------
SIST EN ISO 11591:2021/oprA1:2022
DRAFT AMENDMENT
ISO 11591:2020/DAM 1
ISO/TC 188 Secretariat: SIS
Voting begins on: Voting terminates on:
2022-03-18 2022-06-10
Small craft — Field of vision from the steering position
AMENDMENT 1: Title missing
AMENDEMENT 1: Titre manque
ICS: 47.080
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 11591:2020/DAM 1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 3 ----------------------
SIST EN ISO 11591:2021/oprA1:2022
ISO 11591:2020/DAM 1:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on

the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below

or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
© ISO 2022 – All rights reserved
---------------------- Page: 4 ----------------------
SIST EN ISO 11591:2021/oprA1:2022
ISO 11591:2020/DAM 1:2022(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www.iso.org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to

the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see

www.iso.org/iso/foreword.html.
ISO 11591:2020 was prepared by Technical Committee ISO/TC 188, Small craft.
This amendment 1 to ISO 11591:2020 was prepared by ISO/TC 188, Small craft.
The main changes compared to the previous edition are as follows:

— clarify the procedure to determine the level reference line and to verify the field of vision in the

vertical field.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www.iso.org/members.html.
iii
© ISO 2022 – All rights reserved
---------------------- Page: 5 ----------------------
SIST EN ISO 11591:2021/oprA1:2022
---------------------- Page: 6 ----------------------
SIST EN ISO 11591:2021/oprA1:2022
ISO 11591:2020/DAM 1:2022(E)
Small craft — Field of vision from the steering position
AMENDMENT 1: Title missing
Page iii, Contents
Add to the Contents after cl. 8:
Annex A (normative)
Clause 2
Remove the following normative reference:
ISO 10240:2019, Small craft – Owner’s manual
Page 4, Clause 4.2.2.2
Add after Clause 4.2.2.2 the following:

4.2.2.3 Annex A sets the procedure and methods to determine the level reference line and to verify

the field of vision in the vertical field for power driven craft with steering wheel or equivalent fixed

installed direct control
Clause 8.1
Remove the following text:

The owner's manual shall be in accordance with ISO 10240:2019 and shall include the following

information.
Instead of the removed text, add the following text:

An owner’s manual shall be provided with the craft and shall include the following information.

Clause 8.2
Remove the following text:

The owner's manual shall be in accordance with ISO 10240:2019 and shall include the following

information.
Instead of the removed text, add the following text:

An owner’s manual shall be provided with the craft and shall include the following information.

Clause 8.3
Remove the following text:

The owner's manual shall be in accordance with ISO 10240:2019 and shall include the following

information.
Instead of the removed text, add the following text:
An owner’s manual shall be provided with the craft and shall
...