SIST EN 1797-1:1999

Cryogenic vessels - Gas/material compatibility - Part 1: Oxygen compatibility

This Standard specifies the general requirements and defines the testing methods for establishing oxygen compatibility of materials (metallic and non-metallic) to be used for the manufacture of cryogenic vessels and associated equipment.  It mainly deals with materials that are normally or could be in contact with liquid/gaseous oxygen e.g., materials for cryogenic vessels used for the storage and/or transport of liquid oxygen.  It also deals with the materials which can be in contact with oxygen enriched environment e.g. insulating materials used for nitrogen, neon, hydrogen and helium cryogenic vessels where air condensation is possible.

Kryo-Behälter - Verträglichkeit von Gas/Werkstoffen - Teil 1: Sauerstoff-Verträglichkeit

Diese Europäische Norm legt die allgemeinen Anforderungen fest und definiert die Prüfverfahren für die Festlegung der Sauerstoff-Verträglichkeit von Werkstoffen (metallische und nicht-metallische), die für die Herstellung von Kryo-Behältern und deren Zubehör angewendet werden. Sie behandelt hauptsächlich Werkstoffe, die üblicher- oder möglicherweise mit flüssigem/gasförmigem Sauerstoff in Berührung kommen, wie z.B. Werkstoffe für Kryo-Behälter zur Lagerung und/oder für den Transport von flüssigem Sauerstoff.

Récipients cryogéniques - Compatibilité entre gaz et matériaux - Partie 1: Compatibilité a l'oxygene

La présente norme spécifie les prescriptions générales et définit les méthodes d'essai pour établir la compatibilité oxygene des matériaux (métalliques et non métalliques) destinés a etre utilisés pour la fabrication de récipients cryogéniques et de leurs équipements associés. Elle traite principalement de matériaux qui sont ou qui pourraient normalement se trouver au contact d'oxygene liquide/gazeux, comme par exemple, les matériaux utilisés pour la fabrication de récipients cryogéniques servant au stockage et/ou au transport d'oxygene liquide.

Posode za globoko podhlajene pline - Združljivost plina in materiala - 1. del: Združljivost s kisikom

General Information

• Status: Withdrawn
• Publication Date: 31-Dec-1998
• Withdrawal Date: 31-Oct-2002
• ICS: 23.020.40 - Cryogenic vessels
• Technical Committee: TLP - Pressure vessels
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Nov-2002
• Due Date: 01-Nov-2002
• Completion Date: 01-Nov-2002
• Directive: 94/55/EC - Transport of dangerous goods by road
• Directive: 96/49/EC - Transport of dangerous goods by rail
• Directive: 96/86/EC - Transport of dangerous goods by road (94/55/EC Dir. amendment)
• Directive: 96/87/EC - Transport of dangerous goods by rail (96/49/EC Dir. amendment)
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
• Ref Project: EN 1797-1:1998 - Cryogenic vessels - Gas/material compatibility - Part 1: Oxygen compatibility

Relations

• Replaced By: SIST EN 1797:2002 - Cryogenic vessels - Gas/material compatibility
• Effective Date: 01-Nov-2002

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Posode za globoko podhlajene pline - Združljivost plina in materiala - 1. del: Združljivost s kisikomKryo-Behälter - Verträglichkeit von Gas/Werkstoffen - Teil 1: Sauerstoff-VerträglichkeitRécipients cryogéniques - Compatibilité entre gaz et matériaux - Partie 1: Compatibilité a l'oxygeneCryogenic vessels - Gas/material compatibility - Part 1: Oxygen compatibility23.020.40Proti mrazu odporne posode (kriogenske posode)Cryogenic vesselsICS:Ta slovenski sta
...