SIST EN 12941:2024
(Main)Respiratory protective devices - Powered filtering devices incorporating a loose fitting respiratory interface - Requirements, testing, marking
Respiratory protective devices - Powered filtering devices incorporating a loose fitting respiratory interface - Requirements, testing, marking
This document specifies minimum requirements for powered filtering Respiratory Protective Devices (RPD) incorporating a loose fitting respiratory interface (RI). It does not cover devices designed for use in circumstances where there is or might be an oxygen deficiency (concentration in oxygen less than a volume fraction of 17 %).
Escape RPD are not covered by this document.
Laboratory and practical performance tests are included for the assessment of compliance with the requirements.
Atemschutzgeräte - Gebläsefiltergeräte mit einem Atemanschluss ohne Dichtsitz (Haube) - Anforderungen, Prüfung, Kennzeichnung
Dieses Dokument legt Mindestanforderungen für Atemschutzgeräte (ASG) mit Gebläsefiltergerät und Atemanschluss ohne Dichtsitz (RI, en: respiratory interface) fest. Es gilt nicht für Geräte, die für die Verwendung bei möglichem Sauerstoff-Mangel (Sauerstoff-Konzentration weniger als 17 % Volumenanteil) vorgesehen sind.
Fluchtgeräte (Atemschutzgeräte zu Fluchtzwecken) werden von diesem Dokument nicht abgedeckt.
Laborprüfungen und praktische Leistungsprüfungen sind enthalten, um die Übereinstimmung mit den Anforderungen feststellen zu können.
Appareils de protection respiratoire - Appareils filtrants à ventilation assistée avec interface respiratoire à ajustement lâche - Exigences, essais, marquage
Le président document spécifie les caractéristiques minimales exigées des appareils de protection respiratoire (APR) filtrants à assistance motorisée avec interface respiratoire (IR) à ajustement lâche. Il ne s'applique pas aux appareils destinés à être utilisés dans des circonstances présentant ou susceptibles de présenter un défaut d'oxygène (concentration en oxygène inférieure, en fraction volumique, à 17 %).
Les APR pour l’évacuation ne sont pas couverts par le présent document.
Il comporte des essais de laboratoire et des essais pratiques de performance pour évaluer la conformité aux exigences.
Oprema za varovanje dihal - Napajana oprema za filtriranje z vgrajenim ohlapno prilegajočim dihalnim vmesnikom - Zahteve, preskušanje, označevanje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 12941:2024
01-april-2024
Nadomešča:
SIST EN 12941:1999
SIST EN 12941:1999/A1:2004
SIST EN 12941:1999/A2:2009
Oprema za varovanje dihal - Napajana oprema za filtriranje z vgrajenim ohlapno
prilegajočim dihalnim vmesnikom - Zahteve, preskušanje, označevanje
Respiratory protective devices - Powered filtering devices incorporating a loose fitting
respiratory interface - Requirements, testing, marking
Atemschutzgeräte - Gebläsefiltergeräte mit einem Atemanschluss ohne Dichtsitz
(Haube) - Anforderungen, Prüfung, Kennzeichnung
Appareils de protection respiratoire - Appareils filtrants à ventilation assistée avec
interface respiratoire à ajustement lâche - Exigences, essais, marquage
Ta slovenski standard je istoveten z: EN 12941:2023
ICS:
13.340.30 Varovalne dihalne naprave Respiratory protective
devices
SIST EN 12941:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 12941:2024
---------------------- Page: 2 ----------------------
SIST EN 12941:2024
EN 12941
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2023
EUROPÄISCHE NORM
ICS 13.340.30 Supersedes EN 12941:1998
English Version
Respiratory protective devices - Powered filtering devices
incorporating a loose fitting respiratory interface -
Requirements, testing, marking
Appareils de protection respiratoire - Appareils Atemschutzgeräte - Gebläsefiltergeräte mit einem
filtrants à ventilation assistée avec interface Atemanschluss ohne Dichtsitz (Haube) -
respiratoire à ajustement lâche - Exigences, essais, Anforderungen, Prüfung, Kennzeichnung
marquage
This European Standard was approved by CEN on 9 August 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12941:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 12941:2024
EN 12941:2023 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions, description and symbols . 5
3.1 Terms and definitions . 5
3.2 Description . 6
3.3 Symbols . 7
4 Classification . 7
5 Requirements . 8
5.1 General . 8
5.2 Values and tolerances .
...
SLOVENSKI STANDARD
oSIST prEN 12941:2017
01-februar-2017
2SUHPD]DYDURYDQMHGLKDO2SUHPDVWODþQRILOWUDFLMR]UDND]RKODSQLPVLVWHPRP
]DSULWUGLWHYYPHVQLND=DKWHYHSUHVNXãDQMHR]QDþHYDQMH
Respiratory protective devices - Powered filtering devices incorporating a loose fitting
respiratory interface - Requirements, testing, marking
Atemschutzgeräte - Gebläsefiltergeräte mit einem Atemanschluss ohne Dichtsitz
(Haube) - Anforderungen, Prüfung und Kennzeichnung
Appareils de protection respiratoire - Appareils filtrants à assistance motorisée avec
interface respiratoire à ajustement lâche - Exigences, essais, marquage
Ta slovenski standard je istoveten z: prEN 12941
ICS:
13.340.30 Varovalne dihalne naprave Respiratory protective
devices
oSIST prEN 12941:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 12941:2017
---------------------- Page: 2 ----------------------
oSIST prEN 12941:2017
DRAFT
EUROPEAN STANDARD
prEN 12941
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2016
ICS 13.340.30 Will supersede EN 12941:1998
English Version
Respiratory protective devices - Powered filtering devices
incorporating a loose fitting respiratory interface -
Requirements, testing, marking
Appareils de protection respiratoire - Appareils Atemschutzgeräte - Gebläsefiltergeräte mit einem
filtrants à assistance motorisée avec interface Atemanschluss ohne Dichtsitz (Haube) -
respiratoire à ajustement lâche - Exigences, essais, Anforderungen, Prüfung und Kennzeichnung
marquage
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 79.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12941:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 12941:2017
prEN 12941:2016 (E)
Contents Page
European foreword . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, description, abbreviations and symbols . 6
3.1 Terms, definitions and abreviations . 6
3.2 Description . 7
3.3 Symbols . 8
4 Designation. 8
5 Classification .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.