SIST EN 133:2002
(Main)Respiratory protective devices - Classification
Respiratory protective devices - Classification
This European Standard classifies respiratory protective devices (RPD) according to their basic design, i.e. a general logical grouping of the RPD.
This European standard is intended to serve as a basic introductory reference for users and for the preparation and revision of European Standards on respiratory protective devices.
Atemschutzgeräte - Einteilung
Diese Europäische Norm teilt Atemschutzgeräte entsprechend ihrer grundlegenden Konstruktion ein, d. h. sie gibt eine allgemeine logische Gruppeneinteilung der Atemschutzgeräte.
Diese Europäische Norm ist dafür vorgesehen, als grundlegende und einführende Verweisung für Benutzer und zum Erstellen und Überarbeiten von Europäischen Normen für Atemschutzgeräte zu dienen.
Appareils de protection respiratoire - Classification
La présente Norme européenne spécifie la classification des appareils de protection respiratoire (APR) en fonction de leur conception de base, a savoir un groupement logique général des appareils de protection respiratoire.
La présente Norme européenne est destinée a servir de référence introductive aux utilisateurs et a etre utilisée pour l'élaboration et la révision de normes européennes sur les appareils de protection respiratoire.
Oprema za varovanje dihal - Razvrstitev
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Respiratory protective devices - ClassificationOprema za varovanje dihal - RazvrstitevAppareils de protection respiratoire - ClassificationAtemschutzgeräte - Einteilung13.340.30Varovalne dihalne napraveRespiratory protective devicesICS:SIST EN 133:2002enTa slovenski standard je istoveten z:EN 133:200101-junij-2002SIST EN 133:2002SLOVENSKI
STANDARDSIST EN 133:19961DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 133October 2001ICS 13.340.30Supersedes EN 133:1990English versionRespiratory protective devices - ClassificationAppareils de protection respiratoire - ClassificationAtemschutzgeräte - EinteilungThis European Standard was approved by CEN on 2 September 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 133:2001 E
EN 133:2001 (E)2ContentspageForeword.31Scope.42Normative references.43Classification.53.1General classification.53.2Filtering devices (see Table 1).63.3Breathing apparatus (see Table 2).7Annex ZA (informative)
Clauses of this European Standard addressing essential requirements orother provisions of EU Directives.9
EN 133:2001 (E)3ForewordThis document has been prepared by Technical Committee CEN/TC 79, "Respiratory protective devices", thesecretariat of which is held by DIN.This documents supersedes EN 133:1990.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by April 2002, and conflicting national standards shall be withdrawn at the latest byApril 2002.This European Standard has been prepared under a mandate given to CEN by the European Commission and theEuropean Free Trade Association, and supports essential requirements of EU Directive 89/686/EEC.For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this standard.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,Switzerland and the United Kingdom.
EN 133:2001 (E)41 ScopeThis European Standard classifies respiratory protective devices (RPD) according to their basic design, i.e. ageneral logical grouping of the RPD.This European standard is intended to serve as a basic introductory reference for users and for the preparation andrevision of European Standards on respiratory protective devices.2 Normative referencesThis European Standard incorporates, by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 132, Respiratory protective devices - Definitions of terms and pictograms.EN 136, Respiratory protective devices - Full face masks – Requirements, testing, marking.EN 137, Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus –Requirements, testing, marking.EN 138, Respiratory protective devices - Fresh air hose breathing apparatus for use with full face mask, half maskof mouthpiece assembly - Requirements, testing, marking.EN 139, Respiratory protective devices - Compressed air line breathing apparatus for use with a full face mask, halfmask or mouthpiece assembly – Requirements, testing, marking.EN 140, Respiratory protective devices – Half masks and quarter masks – Requirements, testing, marking.EN 141, Respiratory protective devices - Gas filters and combined filters – Requirements, testing, marking.EN 142, Respiratory protective devices - Mouthpiece assemblies – Requirements, testing, marking.EN 143, Respiratory protective devices - Particle filters – Requirements, testing, marking.EN 145, Respiratory protective devices - Self-contained closed-circuit breathing apparatus compressed oxygen orcompressed oxygen-nitrogen type – Requirements, testing, marking.EN 149, Respiratory protective devices - Filtering half masks to protect against particles – Requirements, testing,marking.EN 250, Respiratory equipment - Open-circuit self-contained compressed air diving apparatus – Requirements,testing, marking.EN 269, Respiratory protective devices - Powered fresh air hose breathing apparatus incorporating a hood –Requirements, testing, marking.EN 270, Respiratory protective devices - Compressed air line breathing apparatus incorporating a hood –Requirements, testing, marking.EN 271, Respiratory protective devices - Compressed air line or powered fresh air hose breathing apparatusincorporating a hood for use in abrasive blasting operations – Requirements, testing, marking.
EN 133:2001 (E)5EN 371, Respiratory protective devices - AX gas filters and combined filters against low boiling organic compounds- Requirements, testing, marking.EN 372, Respiratory protective devices - SX gas filters and combined filters against specific named compounds –Requirements, testing, marking.EN 400, Respiratory protective devices for self-rescue - Self-contained closed-circuit breathing apparatus -Compressed oxygen escape apparatus – Requirements, testing, marking.EN 401, Respiratory protective devices for self-rescue - Self-contained closed-circuit breathing apparatus -Chemical oxygen (KO2) escape apparatus – Requirements, testing, marking.EN 402, Respiratory protective devices for escape - Self-contained open-circuit compressed air breathingapparatus with full face mask or mouthpiece assembly – Requirements, testing, marking.EN 403, Respiratory protective devices for self-rescue - Filtering devices with hood for self-rescue from fire –Requirements, testing, marking.EN 404, Respiratory protective devices for s
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.