oSIST prEN 12697-35:2023
(Main)Bituminous mixtures - Test methods - Part 35: Laboratory mixing
Bituminous mixtures - Test methods - Part 35: Laboratory mixing
This document describes the laboratory mixing of bituminous materials for the manufacture of specimens. This document specifies the reference compaction temperatures for mixing based on the grade of the binder for paving grade and hard paving grade bitumen.
Annex A describes the method for manufacture of samples of asphalt mixtures using foamed bitumen.
Annex B describes the method for manufacture of samples of asphalt mixtures using bitumen emulsion.
Once mixed, mastic asphalt samples are prepared in accordance with Annex C.
Asphalt - Prüfverfahren - Teil 35: Labormischen
Dieses Dokument beschreibt das Mischen von Asphalt im Labor zur Herstellung von Probekörpern. Dieses Dokument legt die Bezugstemperaturen für die Verdichtung fest, die beim Mischen auf der Grundlage der Bindemittelsorte für Straßenbaubitumen und hartes Straßenbaubitumen einzuhalten sind.
Anhang A beschreibt das Verfahren zur Herstellung von Proben aus Asphalt mit Schaumbitumen.
Anhang B beschreibt das Verfahren zur Herstellung von Proben aus Asphalt mit Bitumenemulsion.
Nach dem Mischen werden Gussasphaltprobekörper nach Anhang C hergestellt.
Mélanges bitumineux - Méthodes d'essais - Partie 35: Malaxage de laboratoire
Le présent document décrit le malaxage de matériaux bitumineux en laboratoire dans le cadre de la fabrication d’éprouvettes. Il définit les températures de compactage de référence pour le mélange en fonction du grade du liant pour les bitumes routiers usuels et les bitumes routiers de grade dur.
L’Annexe A décrit la méthode de fabrication d’échantillons de mélanges bitumineux à l’aide de mousse de bitume.
L’Annexe B décrit la méthode de fabrication d’échantillons de mélanges bitumineux à base d’émulsion de bitume.
Une fois malaxés, les échantillons d’asphalte coulé sont préparés conformément à l’Annexe C.
Bitumenske zmesi - Preskusne metode - 35. del: Laboratorijska zmes
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 12697-35:2023
01-december-2023
Bitumenske zmesi - Preskusne metode - 35. del: Laboratorijska zmes
Bituminous mixtures - Test methods - Part 35: Laboratory mixing
Asphalt - Prüfverfahren - Teil 35: Labormischen
Mélanges bitumineux - Méthodes d'essais - Partie 35: Malaxage de laboratoire
Ta slovenski standard je istoveten z: prEN 12697-35
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN 12697-35:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 12697-35:2023
---------------------- Page: 2 ----------------------
oSIST prEN 12697-35:2023
DRAFT
EUROPEAN STANDARD
prEN 12697-35
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2023
ICS 93.080.20 Will supersede EN 12697-35:2016
English Version
Bituminous mixtures - Test methods - Part 35: Laboratory
mixing
Mélanges bitumineux - Méthodes d'essais - Partie 35: Asphalt - Prüfverfahren - Teil 35: Labormischung
Malaxage de laboratoire
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 227.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12697-35:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 12697-35:2023
prEN 12697-35:2023 (E)
Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and symbols . 5
3.1 Terms and definitions . 5
3.2 Symbols . 6
4 Principle . 6
5 Apparatus . 6
6 Procedure . 7
6.1 Reference compaction temperature for mixtures, reference installation temperature
for mastic asphalt . 7
6.2 Preparation of aggregate and filler . 8
6.3 Preparation of reclaimed asphalt .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.