oSIST prEN IEC 62282-7-2:2024
(Main)Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs)
Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs)
Brennstoffzellentechnologien - Teil 7-2: Prüfverfahren - Prüfungen zum Nachweis des Einzelzellen- und Stackleistungsverhaltens von Festoxid-Brennstoffzellen (SOFC)
Technologies des piles à combustible - Partie 7-2: Méthodes d’essai - Essais de performance de cellule élémentaire et de pile pour les piles à combustible à oxyde solide (SOFC)
Tehnologije gorivnih celic - 7-2. del: Preskusne metode - Preskušanje zmogljivosti ene celice in sestava celic s trdnim oksidnim gorivom
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 62282-7-2:2024
01-april-2024
Tehnologije gorivnih celic - 7-2. del: Preskusne metode - Preskušanje zmogljivosti
ene celice in sestava celic s trdnim oksidnim gorivom
Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests
for solid oxide fuel cells (SOFCs)
Brennstoffzellentechnologien - Teil 7-2: Prüfverfahren - Prüfungen zum Nachweis des
Einzelzellen- und Stackleistungsverhaltens von Festoxid-Brennstoffzellen (SOFC)
Technologies des piles à combustible - Partie 7-2: Méthodes d’essai - Essais de
performance de cellule élémentaire et de pile pour les piles à combustible à oxyde solide
(SOFC)
Ta slovenski standard je istoveten z: prEN IEC 62282-7-2:2024
ICS:
27.070 Gorilne celice Fuel cells
oSIST prEN IEC 62282-7-2:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 62282-7-2:2024
---------------------- Page: 2 ----------------------
oSIST prEN IEC 62282-7-2:2024
105/1021/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62282-7-2 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-02-09 2024-05-03
SUPERSEDES DOCUMENTS:
105/1002/CD, 105/1019/CC
IEC TC 105 : FUEL CELL TECHNOLOGIES
SECRETARIAT: SECRETARY:
Germany Mr David Urmann
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of CENELEC,
is drawn to the fact that this Committee Draft for Vote (CDV) is
submitted for parallel voting.
The CENELEC members are invited to vote through the CENELEC
online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clau ses to be
included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC c lauses.
(SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel
cells (SOFCs)
PROPOSED STABILITY DATE: 2027
NOTE FROM TC/SC OFFICERS:
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 62282-7-2:2024
105/1021/CDV – 2 – IEC CDV 62282-7-2© IEC 2024
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and symbols. 8
3.1 Terms and definitions . 8
3.2 Symbols . 10
4 General safety conditions . 11
5 Cell/stack assembly unit . 11
6 Testing system . 12
6.1 Subsystems in testing system . 12
6.2 Maximum variation in control items of testing system . 14
7 Instruments and measurement methods . 14
7.1 General .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.