Bituminous mixtures - Test methods - Part 48: Interlayer bonding

This document specifies test methods for determining the bond strength between an asphalt layer and other newly constructed construction layers or existing substrates in road or airfield pavements. The tests can also be applied on laboratory prepared interlayers.
The normative tests described in this document are:
—   Torque Bond Test (TBT), generally applicable to any layer thicknesses;
—   Shear Bond Test (SBT), generally applicable to layer thicknesses > 15 mm;
—   Tensile Adhesion Test (TAT), generally applicable to layer thicknesses ≤ 15 mm.
NOTE   Further non normative test methods are described in informative annexes:
—   Annex A (informative) - Compressed Shear Bond Test (CSBT);
—   Annex B (informative) - Alternative Shear Bond Test (ASBT);
—   Annex C (informative) - Layer Adhesion Measuring Instrument (LAMI).

Asphalt - Prüfverfahren - Teil 48: Schichtenverbund

Mélanges bitumineux - Méthodes d'essai - Partie 48 : Collage des couches

Bitumenske zmesi - Preskusne metode - 48. del: Zlepljenost plasti

General Information

Status
Not Published
Public Enquiry End Date
24-Jul-2025
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
22-May-2025
Due Date
09-Oct-2025

Relations

Draft
EN 12697-48:2022/oprA1:2025
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2025
Bitumenske zmesi - Preskusne metode - 48. del: Zlepljenost plasti
Bituminous mixtures - Test methods - Part 48: Interlayer bonding
Asphalt - Prüfverfahren - Teil 48: Schichtenverbund
Mélanges bitumineux - Méthodes d'essai - Partie 48 : Collage des couches
Ta slovenski standard je istoveten z: EN 12697-48:2021/prA1
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 12697-48:2021
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
May 2025
ICS 93.080.20
English Version
Bituminous mixtures - Test methods - Part 48: Interlayer
bonding
Mélanges bitumineux - Méthodes d'essai - Partie 48 : Asphalt - Prüfverfahren - Teil 48: Schichtenverbund
Collage des couches
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 227.

This draft amendment A1, if approved, will modify the European Standard EN 12697-48:2021. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.