SIST EN ISO 10563:2001

Building construction - Sealants for joints - Determination of change in mass and volume (ISO 10563:1991)

Hochbau - Fugendichtstoffe - Bestimmung der Änderung von Masse und Volumen (ISO 10563:1991)

Diese Internationale Norm legt ein Verfahren zur Bestimmung der Änderung von Masse und Volumen von Dichtstoffen fest, die zur Abdichtung von Fugen im Hochbau verwendet werden.

Construction immobiliere - Mastics pour joints - Détermination des variations de masse et de volume (ISO 10563:1991)

Gradnja objektov - Tesnilne mase za stike - Ugotavljanje spremembe mase in prostornine

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-2001
• Withdrawal Date: 30-Nov-2005
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: GPO - Building construction
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Dec-2005
• Due Date: 01-Dec-2005
• Completion Date: 01-Dec-2005
• Ref Project: EN ISO 10563:1997 - Building construction - Sealants for joints - Determination of change in mass and volume (ISO 10563:1991)

Relations

• Replaced By: SIST EN ISO 10563:2005 - Building construction - Sealants - Determination of change in mass and volume (ISO 10563:2005)
• Effective Date: 01-Dec-2005

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10563:2001
01-december-2001
Gradnja objektov - Tesnilne mase za stike - Ugotavljanje spremembe mase in
prostornine
Building construction - Sealants for joints - Determination of change in mass and volume
(ISO 10563:1991)
Hochbau - Fugendichtstoffe - Bestimmung der Änderung von Masse und Volumen (ISO
10563:1991)
Construction immobiliere - Mastics pour joints - Détermination des variations de masse
et de volume (ISO 10563:1991)
Ta slovenski standard je istoveten z: EN ISO 10563:1997
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN ISO 10563:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10563:2001

---------------------- Page: 2 ----------------------

SIST EN ISO 10563:2001

---------------------- Page: 3 ----------------------

SIST EN ISO 10563:2001

---------------------- Page: 4 ----------------------

SIST EN ISO 10563:2001

---------------------- Page: 5 ----------------------

SIST EN ISO 10563:2001

---------------------- Page: 6 ----------------------

SIST EN ISO 10563:2001
INTERNATIONAL
STANDARD
First edition
1991-07-M
Building construction - Sealants for joints -
Determination of change in mass and volume
Construction immobilike - Mastics pour joints - D&termination des
variations de masse et de volume
Reference number
IS0 10563:1991(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 10563:2001
ISQ 10563:1991(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. IS0 collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an lnter-
national Standard requires approval by at least 75 % of the member
bodies casting a vote.
International Standard IS0 10563 was prepared by Technical Committee
ISO/TC 59, Building construction.
0 IS0 1991
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without
permission in writing from the publisher.
International Organizati on for Standardiz ation
Case Postale 56 l CH-1 21 1 Gen&ve 20 l Switzerland
Printed in Switzerland

---------------------- Page: 8 ----------------------

SIST EN ISO 10563:2001
INTERNATIONAL STANDARD IS0 10563:1991(E)
Building construction - Sealants for joints - Determination
of change in mass and volume
1 Scope 5 Apparatus and materials
This International Standard specifies a method for
5.1 Rings of non-corrosive metal, having the fol-
the determination of the change of mass and the
lowing approximate dimensions: outer diameter,
change of volume of sealants used in joints in
34 mm; inner diameter, 30 mm; height, IO mm. A
building construction.
hook or loop is fixed to each ring to suspend it from
a string for the weighing procedure.
5.2 Anti-adherent substrate, for the preparation of
2 Normative reference
test specimens; e.g. wet paper.
The following standard contains provisions which,
through reference in this text, constitute provisions 5.3 Conditioning chamber, capable of being
controlled at 23 “C & 2 “C and (50 + 5) % relative
of this International Standard. At the time of publi-
humidity.
cation, the edition indicated was valid. All standards
are subject to revision, and parties to agreements
based on this International Standard are encour-
5.4 Ventilated oven, convection-type, capable of
aged to investigate the possibility of applying the
being controlled at 70 “C + 2 “C, having an air ex-
-
most recent edition of the sta
...