oSIST prEN 1793-2:2023
(Main)Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions
This document specifies the laboratory method for measuring the airborne sound insulation performance of road traffic noise reducing devices in reverberant conditions. It covers the assessment of the intrinsic performance of barriers that can reasonably be assembled inside the testing facility described in EN ISO 10140-2 and EN ISO 10140-4.
This method is not intended for the determination of the intrinsic characteristics of airborne sound insulation of noise reducing devices to be installed on roads in non-reverberant conditions.
Lärmschutzvorrichtungen an Straßen - Prüfverfahren zur Bestimmung der akustischen Eigenschaften - Teil 2: Produktspezifische Merkmale der Luftschalldämmung in diffusen Schallfeldern
Dispositifs de réduction du bruit du trafic routier - Méthode d'essai pour la détermination de la performance acoustique - Partie 2 : Caractéristiques intrinsèques de l'isolation aux bruits aériens dans des conditions de champ acoustique diffus
Protihrupne ovire za cestni promet - Preskusna metoda za ugotavljanje akustičnih lastnosti - 2. del: Karakteristike, značilne za izolacijo pred zvokom v zraku pri razpršenem zvočnem polju
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 1793-2:2023
01-november-2023
Nadomešča:
SIST EN 1793-2:2018
Protihrupne ovire za cestni promet - Preskusna metoda za ugotavljanje akustičnih
lastnosti - 2. del: Karakteristike, značilne za izolacijo pred zvokom v zraku pri
razpršenem zvočnem polju
Road traffic noise reducing devices - Test method for determining the acoustic
performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse
sound field conditions
Lärmschutzvorrichtungen an Straßen - Prüfverfahren zur Bestimmung der akustischen
Eigenschaften - Teil 2: Produktspezifische Merkmale der Luftschalldämmung in diffusen
Schallfeldern
Dispositifs de réduction du bruit du trafic routier - Méthode d'essai pour la détermination
de la performance acoustique - Partie 2 : Caractéristiques intrinsèques de l'isolation aux
bruits aériens dans des conditions de champ acoustique diffus
Ta slovenski standard je istoveten z: prEN 1793-2
ICS:
17.140.30 Emisija hrupa transportnih Noise emitted by means of
sredstev transport
93.080.30 Cestna oprema in pomožne Road equipment and
naprave installations
oSIST prEN 1793-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 1793-2:2023
---------------------- Page: 2 ----------------------
oSIST prEN 1793-2:2023
DRAFT
EUROPEAN STANDARD
prEN 1793-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2023
ICS 17.140.30; 93.080.30 Will supersede EN 1793-2:2018
English Version
Road traffic noise reducing devices - Test method for
determining the acoustic performance - Part 2: Intrinsic
characteristics of airborne sound insulation under diffuse
sound field conditions
Dispositifs de réduction du bruit du trafic routier - Lärmschutzvorrichtungen an Straßen - Prüfverfahren
Méthode d'essai pour la détermination de la zur Bestimmung der akustischen Eigenschaften - Teil
performance acoustique - Partie 2 : Caractéristiques 2: Produktspezifische Merkmale der
intrinsèques de l'isolation aux bruits aériens dans des Luftschalldämmung in diffusen Schallfeldern
conditions de champ acoustique diffus
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 226.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1793-2:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 1793-2:2023
prEN 1793-2:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.