iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 857:2000

(Main)

Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification

Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification

This European standard specifies requirements for two types of wire braid reinforced hose and hose assemblies of nominal bore from 6 to 25. They are suitable for use with: hydraulic fluids in accordance with ISO 6743-4 with the exception of HFD R, HFD S and HFD T at temperatures ranging from -40°C to +100°C; water based fluids at temperatures ranging from -40°C to +70°C; water at temperatures ranging from 0°C to +70°C.

Gummischläuche und -schlauchleitungen - Kompakthydraulikschläuche mit Drahtgeflechteinlage - Spezifikation

Diese europäische Norm legt Anforderungen für zwei Typen von Schläuchen und Schlauchleitungen mit Drahtgeflechteinlagen vom Innendurchmesser 6 mm bis 25 mm fest; sie sind geeignet zur Verwendung mit: Hydraulikflüssigkeiten nach ISO 6743-4 mit Ausnahme von HFD R, HFD S und HFD T in einem Temperaturbereich von -40°C bis +100°C; wässrigen Flüssigkeiten in einem Temperaturbereich von -40°C bis +70°C; Wasser in einem Temperaturbereich von 0°C bis +70°C.

Tuyaux et flexibles en caoutchouc - Type hydraulique compact avec armature de fils métalliques - Spécification

La présente norme européenne prescrit les exigences pour 2 types de tuyaux et flexibles en caoutchouc a armature de fils métalliques dont les diametres vont de 6 a 25. Ils sont destinés a etre utilisés avec: les fluides hydrauliques selon ISO 6743-4 a l'exception de HFD R, HFD S, HFD T selon une plage de température de -40°C a +100°C, les fluides aqueux selon une plage de température de -40°C a +70°C et l'eau selon une plage de température de 0°C a +70°C.

Gumene cevi in cevni priključki - Z jeklenim kordom ojačene trdne vrste, ki se uporabljajo v hidravlične namene - Specifikacija

General Information

Status
Withdrawn
Publication Date
30-Nov-2000
Withdrawal Date
19-Apr-2015
ICS
23.040.70 - Hoses and hose assemblies
Technical Committee
IPMA - Polimer materials and products
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
17-Apr-2015
Due Date
10-May-2015
Completion Date
20-Apr-2015
Ref Project
EN 857:1996 - Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification

Relations

Replaced By
SIST EN 857:2015 - Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification
Effective Date
01-Jun-2015

Buy Standard

EN 857:2000EN 857:2000
PreviousNext
Standard
EN 857:2000
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 857:2000
01-december-2000
*XPHQHFHYLLQFHYQLSULNOMXþNL=MHNOHQLPNRUGRPRMDþHQHWUGQHYUVWHNLVH
XSRUDEOMDMRYKLGUDYOLþQHQDPHQH6SHFLILNDFLMD
Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic
applications - Specification
Gummischläuche und -schlauchleitungen - Kompakthydraulikschläuche mit
Drahtgeflechteinlage - Spezifikation
Tuyaux et flexibles en caoutchouc - Type hydraulique compact avec armature de fils
métalliques - Spécification
Ta slovenski standard je istoveten z: EN 857:1996
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
SIST EN 857:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 857:200
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 5774:2023(Main)
Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2023)
EN ISO 5774:2023

ISO 5774:2016 specifies the requirements for four types of flexible thermoplastic hose, textile reinforced, for compressed-air applications in the temperature range from −10 °C to +60 °C.
The four types are classified as light service for a maximum working pressure of 7 bar at 23 °C and 4,5 bar at 60 °C, medium service for a maximum working pressure of 10 bar at 23 °C and 6,5 bar at 60 °C, heavy service for a maximum working pressure of 16 bar at 23 °C and 11 bar at 60 °C, and heavy service for use in mining for a maximum working pressure of 25 bar at 23 °C and 13 bar at 60 °C.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13483:2022(Main)
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
EN 13483:2022

This document specifies the requirements and test methods for verification for hose assemblies with vapour recovery for delivery systems on petrol filling stations.
The hose assemblies with vapour recovery for delivery systems on petrol filling stations need to be capable of withstanding anticipated mechanical, thermal and chemical stressing and be resistant to the combustible liquids used in these applications as well as their vapour and vapour air mixtures. It is imperative that the assemblies be constructed in such a way that actions during normal operation cannot give rise to dangerous electrostatic charges nor that there will be any reduction in the performance of the vapour recovery.
The assemblies are intended for use at ambient temperatures between –30 °C and +55 °C for normal temperature class and –40 °C and +55 °C for low temperature class at a working pressure ≤ 16 bar .
Hoses can be constructed from rubber or thermoplastic elastomer (TPE) and this document specifies the requirements for three types of hoses in two grades and two classes of hose assemblies for measured fuel dispensing systems, including oxygenated fuels (≤15 % oxygenated compounds) with internal vapour recovery tubing or hose.
NOTE   This document is not applicable to multi chamber fuel dispensing hoses.
As part of the certification of a new dispenser, testing of fuel samples in accordance with EN 228 are carried out at least eight weeks after the first use of the equipment to avoid unrepresentative sulphur content results.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14420-2:2022(Main)
Hose fittings with clamp units - Part 2: Hose side parts of hose tail
EN 14420-2:2022

This European Standard specifies requirements for the hose tail of hose fittings according to EN 14420 1 for use with clamp units according to EN 14420 3. Furthermore, it specifies materials for hose fittings with clamp units according to EN 14420-4 to EN 14420-8.
Maximum working pressure is 25 bar;  maximum working temperature is 65 °C.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14420-4:2022(Main)
Hose fittings with clamp units - Part 4: Flange connections
EN 14420-4:2022

This document specifies requirements for hose tails according to EN 14420-2, with flanges of mating dimensions PN 10/PN 16/PN 25/PN 40 (according to nominal size and pressure stage) according to EN 1092 1, on hose fittings with clamp units according to EN 14420-3.
Maximum working pressure is 25 bar ); maximum working temperature is 65 °C.
Additionally, flanges are also usable according to EN 14422.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14420-7:2022(Main)
Hose fittings with clamp units - Part 7: Cam locking couplings
EN 14420-7:2022

This document specifies the design, materials, dimensions and marking requirements for cam locking couplings that serve as the link between hoses and connections to transport liquids, solids and gases, except liquid gas and steam. The couplings are capable of operating within the pressure range −0,8 bar1 to 16 bar and in a working temperature range of −20 °C up to +65 °C. For all sizes of aluminium-cast-material couplings and for all couplings size DN 100 the pressure range is from −0,8 bar to 10 bar.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 8330:2022(Main)
Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2022)
EN ISO 8330:2022

This document defines terms used in the hose industry.
Recommended terminology for electrical conductivity and resistance of rubber and plastics hoses and
hose assemblies can be found in ISO 8031:2020, Annex A.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18752:2022(Main)
Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2022)
EN ISO 18752:2022

This document specifies requirements for ten classes, four grades and seven types of wire- or textilereinforced hydraulic hoses and hose assemblies of nominal sizes ranging from 5 to 102. Each class has a
single maximum working pressure for all sizes.
They are suitable for use with:
— oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging
from −40 °C to +100 °C for types AS, AC, BS and BC hoses and from −40 °C to +120 °C for types CS, CC
and DC hoses.
— water-based fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging
from −40 °C to +70 °C.
— water at temperatures ranging from 0 °C to +70 °C.
This document does not include requirements for the connection ends. It is limited to the performance
of hoses and hose assemblies. The hose assembly maximum working pressure is governed by the lowest
maximum working pressure of the components.
NOTE It is the responsibility of the user, in consultation with the hose manufacturer, to establish the
compatibility of the hose with the fluid to be used.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4671:2022(Main)
Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2022)
EN ISO 4671:2022

This document specifies methods of measuring the inside diameter, outside diameter (including
diameter over reinforcement of hydraulic hoses), wall thickness, concentricity and lining and cover
thickness of hoses, methods of measurement and identification of the lengths of hoses and hose
assemblies, and a method of verifying the through-bore of hydraulic hose assemblies

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6801:2022(Main)
Rubber and plastics hoses - Determination of volumetric expansion (ISO 6801:2021)
EN ISO 6801:2021

This document specifies a method for the determination of the volumetric expansion of rubber or
plastics hoses under hydrostatic pressure.
This document does not specify the dimensions of the test piece and the test pressure(s) as each of
which is specified in the appropriate specification.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10619-2:2021(Main)
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021)
EN ISO 10619-2:2021

This document specifies two methods for measuring the stiffness and one method for the determination
of the flexibility of rubber and plastics hoses and tubing when they are bent to a specific radius at subambient
temperatures.
Method A is suitable for non-collapsible rubber and plastics hoses and tubing with a bore of up to and
including 25 mm. This method provides a means of measuring the stiffness of the hose or tubing when
the temperature is reduced from a standard laboratory temperature.
Method B is suitable for rubber and plastics hoses and tubing with a bore of up to 100 mm and provides
a means of assessing the flexibility of the hose or tubing when bent around a mandrel at a specified subambient
temperature. It can also be used as a routine quality control test.
Method C is suitable for rubber and plastics hoses and tubing with a bore of 100 mm and greater.
This method provides a means of measuring the stiffness of the hose and tubing at sub-ambient
temperatures. This method is only suitable for hoses and tubing which are non-collapsible.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day