SIST EN ISO 4641:2024
(Main)Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2024)
Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2024)
ISO 4641:2016 specifies the minimum requirements for textile-reinforced, smooth-bore rubber water-suction and discharge hoses and hose assemblies.
Three types of hoses and hose assemblies are specified according to their operating duty requirements, i.e. their ambient and water temperature ranges:
- ambient temperatures: −25 °C to +70 °C;
- water temperatures during operation: 0 °C to +70 °C.
Saug- und Druck-Gummischläuche und ‑schlauchleitungen für Wasser - Anforderungen (ISO 4641:2024)
Dieses Dokument legt die Mindestanforderungen an Gummischläuche und Schlauchleitungen mit Textileinlage und glatter Innenschicht zum Ansaugen und Fördern von Wasser fest.
Drei Bauarten von Schläuchen und Schlauchleitungen sind entsprechend den Anforderungen an die Betriebsbedingungen festgelegt, d. h. Umgebungs- und Wassertemperaturbereiche:
Umgebungstemperaturen: −25 °C bis +70 °C;
Wassertemperaturen bei Betrieb: 0 °C bis +70 °C.
Tuyaux et flexibles en caoutchouc pour aspiration et refoulement d'eau Spécifications (ISO 4641:2024)
ISO 4641:2016 spécifie les exigences minimales pour les tuyaux et flexibles en caoutchouc à armature textile, à paroi intérieure lisse, utilisés pour l'aspiration et le refoulement de l'eau.
Trois types de tuyaux et de flexibles sont spécifiés selon leurs exigences de service, c'est-à-dire les plages de températures ambiantes et de températures de l'eau:
- températures ambiantes: −25 °C à +70 °C;
- températures de l'eau en service: 0 °C à +70 °C.
Gumene cevi in cevni priključki za dotok in odtok vode - Specifikacija (ISO 4641:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 4641:2024
01-julij-2024
Nadomešča:
SIST EN ISO 4641:2017
Gumene cevi in cevni priključki za dotok in odtok vode - Specifikacija (ISO
4641:2024)
Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO
4641:2024)
Saug- und Druck-Gummischläuche und ‑schlauchleitungen für Wasser - Anforderungen
(ISO 4641:2024)
Tuyaux et flexibles en caoutchouc pour aspiration et refoulement d'eau Spécifications
(ISO 4641:2024)
Ta slovenski standard je istoveten z: EN ISO 4641:2024
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
SIST EN ISO 4641:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 4641:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 4641:2024
EN ISO 4641
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2024
EUROPÄISCHE NORM
ICS 23.040.70 Supersedes EN ISO 4641:2016
English Version
Rubber hoses and hose assemblies for water suction and
discharge - Specification (ISO 4641:2024)
Tuyaux et flexibles en caoutchouc pour aspiration et Saug- und Druck-Gummischläuche und -
refoulement d'eau - Spécifications (ISO 4641:2024) schlauchleitungen für Wasser - Anforderungen (ISO
4641:2024)
This European Standard was approved by CEN on 22 March 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4641:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4641:2024
EN ISO 4641:2024 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 4641:2024
EN ISO 4641:2024 (E)
European foreword
This document (EN ISO 4641:2024) has been prepared by Technical Committee ISO/TC 45 "Rubber and
rubber products" in collaboration with Technical Committee CEN/TC 218 “Rubber and plastics hoses
and hose assemblies” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2024, and conflicting national standards
shall be withdrawn at the latest by November 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4641:2016.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 4641:2024 has been approved by CEN as EN ISO 4641:2024 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 4641:2024
---------------------- Page: 6 ----------------------
SIST EN ISO 4641:2024
Inte
...
SLOVENSKI STANDARD
oSIST prEN ISO 4641:2023
01-julij-2023
Nadomešča:
SIST EN ISO 4641:2017
Gumene cevi in cevni priključki za dotok in odtok vode - Specifikacija (ISO/DIS
4641:2023)
Rubber hoses and hose assemblies for water suction and discharge - Specification
(ISO/DIS 4641:2023)
Saug- und Druck-Gummischläuche und ‑schlauchleitungen für Wasser - Anforderungen
(ISO/DIS 4641:2023)
Tuyaux et flexibles en caoutchouc pour aspiration et refoulement d'eau Spécifications
(ISO/DIS 4641:2023)
Ta slovenski standard je istoveten z: prEN ISO 4641
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
oSIST prEN ISO 4641:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 4641:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 4641:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 4641
ISO/TC 45/SC 1 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-05-30 2023-08-22
Rubber hoses and hose assemblies for water suction and
discharge — Specification
Tuyaux et flexibles en caoutchouc pour aspiration et refoulement d'eau — Spécifications
ICS: 23.040.70
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 4641:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 4641:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 4641
ISO/TC 45/SC 1 Secretariat: DIN
Voting begins on: Voting terminates on:
Rubber hoses and hose assemblies for water suction and
discharge — Specification
Tuyaux et flexibles en caoutchouc pour aspiration et refoulement d'eau — Spécifications
ICS: 23.040.70
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 4641:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 4 ----------------------
oSIST prEN ISO 4641:2023
ISO/DIS 4641:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.