SIST EN 61340-4-5:2005
(Main)Electrostatics -- Part 4-5: Standard test methods for specific applications - Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person
Electrostatics -- Part 4-5: Standard test methods for specific applications - Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person
Specifies test methods for evaluating electrostatic protection provided by a system of footwear and flooring in combination with a person. The test methods are not intended for individual material or system classification purposes.
Elektrostatik -- Teil 4-5: Standard-Prüfverfahren für spezielle Anwendungen - Verfahren zur Charakterisierung der elektrostatischen Schutzwirkung von Schuhwerk und Boden in Kombination mit einer Person
Electrostatique -- Partie 4-5: Méthodes d'essai normalisées pour des applications spécifiques - Méthodes de caractérisation de la protection électrostatique des chaussures et des revêtements de sol par rapport à une personne
Spécifie des méthodes d'essai pour l'évaluation de la protection électrostatique fournie par un système de chaussures et de revêtement de sol par rapport à une personne. Ces méthodes d'essai ne sont pas destinées à la classification des matériaux et systèmes individuels.
Elektrostatika - 4-5. del: Standardne preskusne metode za posebne aplikacije – Metode za karakterizacijo elektrostatične zaščite obutve in talnih oblog v kombinaciji z osebo
General Information
Relations
Standards Content (Sample)
SIST EN 61340-4-5:2005SLOVENSKIjulij 2005
STANDARDElektrostatika - 4-5. del: Standardne preskusne metode za posebne aplikacije – Metode za karakterizacijo elektrostatične zaščite obutve in talnih oblog v kombinaciji z oseboElectrostatics – Part 4-5: Standard test methods for specific applications – Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 61340-4-5:2005(en)ICS17.220.99; 59.080.60; 61.060; 97.150
EUROPEAN STANDARD
EN 61340-4-5 NORME EUROPÉENNE EUROPÄISCHE NORM
September 2004 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61340-4-5:2004 E
ICS 17.220.99 ; 59.080.60
English version
Electrostatics Part 4-5: Standard test methods for specific applications –
Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person (IEC 61340-4-5:2004)
Electrostatique Partie 4-5: Méthodes d'essai normalisées pour des applications spécifiques - Méthodes de caractérisation
de la protection électrostatique
des chaussures et des revêtements de sol par rapport à une personne (CEI 61340-4-5:2004)
Elektrostatik Teil 4-5: Standard-Prüfverfahren für spezielle Anwendungen –
Verfahren zur Charakterisierung
der elektrostatischen Schutzwirkung
von Schuhwerk und Boden
in Kombination mit einer Person (IEC 61340-4-5:2004)
This European Standard was approved by CENELEC on 2004-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EN 61340-4-5:2004 - 2 - Foreword The text of document 101/178/FDIS, future edition 1 of IEC 61340-4-5, prepared by IEC TC 101, Electrostatics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61340-4-5 on 2004-09-01. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2005-06-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2007-09-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 61340-4-5:2004 was approved by CENELEC as a European Standard without any modification. __________
- 3 - EN 61340-4-5:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60093 - 1) Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
HD 429 S1 1983 2) IEC 61340-4-1 - 1) Electrostatics Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors
EN 61340-4-1 2004 2) ISO 1957 - 1) Machine-made textile floor coverings - Selection and cutting of specimens for physical tests
- -
1) Undated reference. 2) Valid edition at date of issue.
NORME INTERNATIONALECEIIECINTERNATIONALSTANDARD 61340-4-5Première éditionFirst edition2004-07Electrostatique– Partie 4-5: Méthodes d'essai normalisées pour des applications spécifiques – Méthodes de caractérisation de la protection électrostatique des chaussures et des
revêtements de sol par rapport à une personne Electrostatics – Part 4-5: Standard test methods for specific applications – Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person Pour prix, voir catalogue en vigueur For price, see current catalogue© IEC 2004
Droits de reproduction réservés
⎯
Copyright - all rights reservedAucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'éditeur. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch
Web: www.iec.ch CODE PRIX PRICE CODE PCommission Electrotechnique InternationaleInternational Electrotechnical Commission
61340-4-5 ” IEC:2004 – 3 –
CONTENTSFOREWORD.51Scope.92Normative references.93Terms and definitions.94Principle.95Atmosphere for conditioning and testing.116Test methods for footwear and flooring in combination with a person.116.1Floor covering sampling and specimen preparation for laboratory tests.116.2Cleaning of footwear for laboratory evaluations and for test on installed floor coverings.136.3Measurement of electrical resistance.136.4Measurement of chargeability.177Test report.19Annex A (normative)
Method of checking calibration of body voltage measuring system.29Figure 1 – Set-ups for measuring electrical resistance of footwear and flooring in combination with a person.25Figure 2 – Typical body voltage recordings showing points
used in calculating mean values.27
61340-4-5 © IEC:2004 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________ELECTROSTATICS –Part 4-5: Standard test methods for specific applications – Methods for characterizing the electrostatic protection
of footwear and flooring in combination with a person FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) andexpenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61340-4-5 has been prepared by IEC technical committee 101: Electrostatics. The text of this standard is based on the following documents: FDIS Report on voting 101/178/FDIS 101/186/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
61340-4-5 © IEC:2004 – 7 –
The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to the specific publication. At this date, the publication will be
• reconfirmed; • withdrawn; • replaced by a revised edition, or • amended.
61340-4-5 © IEC:2004 – 9 –
ELECTROSTATICS – Part 4-5: Standard test methods for specific applications – Methods for characterizing the electrostatic protection
of footwear and flooring in combination with a person 1 Scope This part of IEC 61340 specifies test methods for evaluating electrostatic protection provided by a system of footwear and flooring in combination with a person. The test methods are not intended for individual material or system classification purposes. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60093, Methods of test for volume resistivity and surface resistivity of solid electrical insulating materialsIEC 61340-4-1, Electrostatics – Part 4-1: Standard test methods for specific applications – Electrostatic resistance of floor coverings and installed floorsISO 1957, Machine-made textile floor coverings – Selection and cutting of specimens for physical tests3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 61340-1-2 apply. 4 Principle The characterization of a system is achieved by measuring electrical resistance and chargeability of the footwear and flooring in combination with a person. Chargeability is determined using a walking test. WARNING: Test procedures described in this standard may expose personnel to potentially hazardous electrical conditions. Appropriate electrical hazard reduction practices should be exercised and proper earthing instructions for the equipment used should be followed when performing tests.
61340-4-5 © IEC:2004 – 11 –
5 Atmosphere for conditioning and testing The following requirements supersede any other specification for the atmosphere for conditioning and testing that may be given in one or more of the documents referred to in this standard. Unless otherwise agreed, the atmosphere for conditioning and testing for laboratory evaluations shall be (23 ± 2) °C and (12 ± 3) % relative humidity. The conditioning time prior to testing shall be at least 48 h. Textile floor coverings are preferably pre-conditioned for at least 24 h at (20 ± 2) °C and (65 ± 3) % relative humidity prior to conditioning and testing. During pre-conditioning and conditioning, specimens shall be placed on a rack or other suitable support that allows free circulation of air around them. Whenever tests are made in uncontrolled conditions, e.g. tests on installed floors, the ambient temperature and relative humidity at the time of measurement shall be recorded. 6 Test methods for footwear and flooring in combination with a person 6.1 Floor covering sampling and specimen preparation for laboratory tests Sampling and selection of specimens for laboratory tests shall be carried out according to the principles specified in ISO 1957. For the purposes of this standard, the general principles of ISO 1957 apply to all types of floor covering. From each sample select a specimen measuring (2 ± 0,1) m × (1 ± 0,1) m or, in the case of tiles, select sufficient tiles and/or part tiles to make up a single specimen area of (2 ± 0,1) m × (1 ± 0,1) m. For tests on floor coverings that will be installed with specific earth connections, a groundable point shall be attached to the test specimen in accordance with the manufacturer’s instructions, or as otherwise agreed, and in a way that simulates end use earthing methods. For chargeability tests on floor coverings that will be installed without specific earth connections, groundable points sh
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.