SIST EN 13395-1:2002
(Main)Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 1: Test for flow of thixotropic mortars
Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 1: Test for flow of thixotropic mortars
This European Standard specifies a method for determining the workability (or consistence) of trowel-grade hydraulic cement mortars CC, polymer modified hydraulic cement mortars PCC and polymer bound mortars PC for the protection and repair of concrete, as defined in EN 1504-1.
Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung der Verarbeitbarkeit - Teil 1: Prüfung des Fließverhaltens von thixotropem Mörtel
Diese Europäische Norm beschreibt ein Verfahren zur Bestimmung der Verarbeitbarkeit (oder Konsistenz) von kellengerechten, thixotropen HC-, PCC-, und PC-Produkten und Systemen für die Instandsetzung und den Schutz von Beton nach EN 1504-3. Prüfungen des Fließverhaltens von Vergußmörtel, Mörtel und Beton sind in prEN 104-845-2 bzw. prEN 104-845-3 angegeben.
Produits et systemes de protection et de réparation des structures en béton - Méthodes d'essai - Détermination de l'ouvrabilité - Partie 1: Essai d'écoulement des mortiers thixotropes
La présente Norme européenne spécifie une méthode permettant de déterminer l'ouvrabilité (ou la consistance) des mortiers appliqués a la truelle, a base de ciment hydraulique CC, de ciment hydraulique polymere modifié PCC et de liants polymeres PC, et destinés a la protection et la réparation du béton, définis dans l'EN 1504-1.
Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij - Preskusne metode - Določevanje obdelavnosti - 1. del: Preskus razleza tiksotropnih malt
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung der Verarbeitbarkeit - Teil 1: Prüfung des Fließverhaltens von thixotropem MörtelProduits et systemes de protection et de réparation des structures en béton - Méthodes d'essai - Détermination de l'ouvrabilité - Partie 1: Essai d'écoulement des mortiers thixotropesProducts and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 1: Test for flow of thixotropic mortars91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. Mortar91.080.40Betonske konstrukcijeConcrete structuresICS:Ta slovenski standard je istoveten z:EN 13395-1:2002SIST EN 13395-1:2002en01-november-2002SIST EN 13395-1:2002SLOVENSKI
STANDARD
SIST EN 13395-1:2002
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13395-1May 2002ICS 91.080.40; 91.100.10English versionProducts and systems for the protection and repair of concretestructures - Test methods - Determination of workability - Part 1:Test for flow of thixotropic mortarsProduits et systèmes de protection et de réparation desstructures en béton - Méthodes d'essai - Détermination del'ouvrabilité - Partie 1: Essai d'écoulement des mortiersthixotropesProdukte und Systeme für den Schutz und dieInstandsetzung von Betontragwerken - Prüfverfahren -Bestimmung der Verarbeitbarkeit - Teil 1: Prüfung desFließverhaltens von thixotropem MörtelThis European Standard was approved by CEN on 5 January 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13395-1:2002 ESIST EN 13395-1:2002
EN 13395-1:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Principle.45Equipment.46Preparation and storage of test samples.57Procedure.58Expression of results.59Test report.6Bibliography.8SIST EN 13395-1:2002
EN 13395-1:2002 (E)3ForewordThis document EN 13395-1:2002 has been prepared by Technical Committee CEN/TC 104 "Concrete and relatedproducts", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by November 2002, and conflicting national standards shall be withdrawn at the latestby December 2002.It has been prepared by sub-committee 8 "Products and systems for the protection and repair of concretestructures" the secretariat of which is held by AFNOR.This European Standard is one of a series dealing with products and systems for the protection and repair ofconcrete structures. It describes a test method for determining the workability of thixotropic repair mortars.It is one of inter-related parts dealing with the workability of repair grouts, mortars and concretes. The other partsare:EN 13395-2, Products and systems for the protection and repair of concrete structures - Test methods -Determination of workability - Part 2: Test for flow of grout or mortar.EN 13395-3, Products and systems for the protection and repair of concrete structures - Test methods -Determination of workability - Part 3: Test for flow of repair concrete.EN 13395-4, Products and systems for the protection and repair of concrete structures - Test methods -Determination of workability - Part 4: Application of repair mortar overhead.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 13395-1:2002
EN 13395-1:2002 (E)41 ScopeThis European Standard specifies a method for determining the workability (or consistence) of trowel-gradehydraulic cement mortars CC, polymer modified hydraulic cement mortars PCC and polymer bound mortars PC forthe protection and repair of concrete, as defined in EN 1504-1.2 Normative referencesThis European Standard in
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.