SIST EN 12697-41:2005
(Main)Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids
Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids
This document specifies a test method to determine the resistance of bituminous materials to de-icing fluids such as solutions of acetate and formate. The procedure determines the surface tensile strength of a specimen of asphalt after storage in de-icing fluid.
This document is primarily used as a test on asphalt to be laid on airfields, but it can be used for asphalt to be laid on roads or other paved areas.
Asphalt - Prüfverfahren für Heißasphalt - Teil 41: Widerstand gegen chemische Auftaumittel
Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung des Widerstands von Asphalt gegen chemi-
sche Auftaumittel fest, z. B. Acetat- und Formiat-Lösungen. Das Verfahren bestimmt die Oberflächen-
zugfestigkeit eines Asphaltprobekörpers nach der Lagerung in chemischem Auftaumittel.
Dieses Verfahren wird hauptsächlich zur Prüfung von Asphalt angewendet, der auf Flugplätzen eingebaut
werden soll, es kann jedoch auch auf Asphalt angewendet werden, der auf Straßen oder anderen befestigten
Flächen eingebaut werden soll.
Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné a chaud - Partie 41: Résistance aux fluides de déverglaçage
Le présent document spécifie une méthode d’essai permettant de déterminer la résistance de matériaux bitumineux a des fluides de déverglaçage tels que des solutions d’acétate et de formiate. Le mode opératoire détermine la cohésion d’une éprouvette de mélange hydrocarboné, apres conservation dans un fluide de déverglaçage. Il est applicable a des enrobés compacts, tels que des bétons bitumineux, et peut ne pas etre approprié pour des enrobés moins denses, tels que des enrobés drainants.
Le présent document est principalement utilisé pour des essais sur des enrobés mis en oeuvre sur aérodromes, mais elle peut etre utilisée pour des enrobés mis en oeuvre sur chaussée routiere ou autres.
Bitumenske zmesi – Preskusne metode za vroče asfaltne zmesi – 41. del: Odpornost proti tekočinam za odtajevanje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 12697-41:2005
01-november-2005
%LWXPHQVNH]PHVL±3UHVNXVQHPHWRGH]DYURþHDVIDOWQH]PHVL±GHO
2GSRUQRVWSURWLWHNRþLQDP]DRGWDMHYDQMH
Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing
fluids
Asphalt - Prüfverfahren für Heißasphalt - Teil 41: Widerstand gegen chemische
Auftaumittel
Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné a chaud - Partie
41: Résistance aux fluides de déverglaçage
Ta slovenski standard je istoveten z: EN 12697-41:2005
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
SIST EN 12697-41:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 12697-41:2005
---------------------- Page: 2 ----------------------
SIST EN 12697-41:2005
EUROPEAN STANDARD
EN 12697-41
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2005
ICS 93.080.20
English version
Bituminous mixtures - Test methods for hot mix asphalt - Part
41: Resistance to de-icing fluids
Mélanges bitumineux - Essais pour enrobés à chaud - Asphalt - Prüfverfahren für Heißasphalt - Teil 41:
Partie 41: Résistance aux agents déverglaçants Widerstand gegen chemische Auftaumittel
This European Standard was approved by CEN on 8 April 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12697-41:2005: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 12697-41:2005
EN 12697-41:2005 (E)
Contents Page
Foreword .3
1 Scope .6
2 Normative references .6
3 Term and definition.6
4 Principle.6
5 Apparatus .7
6 Solvent and other materials .8
7 Preparation of test specimens .8
8 Procedure .8
9 Calculation and expression of results.9
10 Report .10
11 Precision.10
2
---------------------- Page: 4 ----------------------
SIST EN 12697-41:2005
EN 12697-41:2005 (E)
Foreword
This European Standard (EN 12697-41:2005) has been prepared by Technical Committee CEN/TC 227
“Road materials”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2005, and conflicting national standards shall be withdrawn
at the latest by December 2005.
This document is one of a series of standards as listed below:
EN 12697-1, Bituminous mixtures — Test methods for hot mix asphalt — Part 1: Soluble binder content
EN 12697-2, Bituminous mixtures — Test methods for hot mix asphalt — Part 2: Determination of particle size
distribution
EN 12697-3, Bituminous mixtures — Test methods for hot mix asphalt — Part 3: Bitumen recovery: Rotary
evaporator
EN 12697-4, Bituminous mixtures — Test methods for hot mix asphalt — Part 4: Bitumen recovery:
Fractionating column
EN 12697-5, Bituminous mixtures — Test methods for hot mix asphalt — Part 5: Determination of the
maximum density
EN 12697-6, Bituminous mixtures — Test methods for hot mix asphalt — Part 6: Determination of bulk density
of bituminous specimens
EN 12697-7, Bituminous mixtures — Test methods for hot mix asphalt — Part 7: Determination of bulk density
of bituminous specimens by gamma rays
EN 12697-8, Bituminous mixtures — Test methods for hot mix asphalt — Part 8: Determination of void
characteristics of bituminous specimens
EN 12697-9, Bituminous mixtures — Test methods for hot mix asphalt — Part 9: Determination of the
reference density
EN 12697-10, Bituminous mixtures — Test methods for hot mix asphalt — Part 10: Compactibility
EN 12697-11, Bituminous mixtures — Test methods for hot mix asphalt — Part 11: Determination of the
affinity between aggregate and bitumen
EN 12697-12, Bituminous mixtures — Test methods for hot mix asphalt — Part 12: Determination of the water
sensitivity of bituminous specimens
EN 12697-13, Bituminous mixtures — Test methods for hot mix asphalt — Part 13: Temperature
measurement
EN 12697-14, Bituminous mixtures — Test methods for hot mix asphalt — Part 14: Water content
EN 12697-15, Bituminous mixtures — Test methods for hot mix asphalt — Part 15: Determination of the
segregation sensitivity
EN 12697-16, Bituminous mixtures — Test methods for hot mix asphalt — Part 16: Abrasion by studded tyres
3
---------------------- Page: 5 ----------------------
SIST EN 12697-41:2005
EN 12697-41:2005 (E)
EN 12697-17, Bituminous mixtures — Test methods for hot mix asphalt — Part 17: Particle loss of porous
asphalt specimen
EN 12697-18, Bituminous mixtures — Test methods for hot mix asphalt — Part 18: Binder drainage
EN 12697-19, Bituminous mixtures — Test methods for hot mix asphalt — Part 19: Permeability of specimen
EN 12697-20, Bituminous mixtures — Test methods for hot mix asphalt — Part 20: Indentation using cube or
Marshall specimens
EN 12697-21, Bituminous mixtures — Test methods for hot mix asphalt — Part 21: Indentation using plate
specimens
EN 12697-22, Bituminous mixtures — Test methods for hot mix asphalt — Part 22: Wheel tracking
EN 12697-23, Bituminous mixtures — Test methods for hot mix asphalt — Part 23: Determination of the
indirect tensile strength of bituminous specimens
EN 12697-24, Bituminous mixtures — Test methods for hot mix asphalt — Part 24: Resistance to fatigue
EN 12697-25, Bituminous mixtures — Test methods for hot mix asphalt — Part 25: Cyclic compression test
EN 12697-26, Bituminous mixtures — Test methods for hot mix asphalt — Part 26: Stiffness
EN 12697-27, Bituminous mixtures — Test methods for hot mix asphalt — Part 27: Sampling
EN 12697-28, Bituminous mixtures — Test methods for hot mix asphalt — Part 28: Preparation of samples for
determining binder content, water content and grading
EN 12697-29, Bituminous mixtures — Test methods for hot mix asphalt — Part 29: Determination of the
dimensions of a bituminous specimen
EN 12697-30, Bituminous mixtures — Test methods for hot mix asphalt — Part 30: Specimen preparation by
impact compactor
EN 12697-31, Bituminous mixtures — Test methods for hot mix asphalt — Part 31: Specimen preparation by
gyratory compactor
EN 12697-32, Bituminous mixtures — Test methods for hot mix asphalt — Part 32: Laboratory compaction of
bituminous mixtures by vibratory compactor
EN 12697-33, Bituminous mixtures — Test methods for hot mix asphalt — Part 33: Specimen prepared by
roller compactor
EN 12697-34, Bituminous mixtures — Test methods for hot mix asphalt — Part 34: Marshall test
EN 12697-35, Bituminous mixtures — Test methods for hot mix asphalt — Part 35: Laboratory mixing
EN 12697-36, Bituminous mixtures — Test methods for hot mix asphalt — Part 36: Determination of the
thickness of a bituminous pavement
EN 12697-37, Bituminous mixtures — Test methods for hot mix asphalt — Part 37: Hot sand test for the
adhesivity of binder on pre-coated chippings for hot rolled asphalt
EN 12697-38, Bituminous mixtures — Test methods for hot mix asphalt — Part 38: Common equipment and
calibration
EN 12697-39, Bituminous mixtures — Test methods for hot mix asphalt — Part 39: Binder content by ignition
4
---------------------- Page: 6 ----------------------
SIST EN 12697-41:2005
EN 12697-41:2005 (E)
prEN 12697-40, Bituminous mixtures — Test methods for hot mix asphalt — Part 40: In-situ drainability
EN 12697-41, Bituminous mixtures — Test methods for hot mix asphalt — Part 41: Resistance to de-icing
fluids
EN 12697-42, Bituminous mixtures — Test methods for hot mix asphalt — Part 42: Amount of foreign matter
in reclaimed asphalt
EN 12697-43, Bituminous mixtures — Test methods for hot mix asphalt — Part 43: Resistance to fuel
No existing European Standard is superseded.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
5
---------------------- Page: 7 ----------------------
SIST EN 12697-41:2005
EN 12697-41:2005 (E)
1 Scope
This European Standard specifies a test method to determine the resistance of bituminous materials to de-
icing fluids such as solu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.