SIST EN 2266-008:2015

Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 008: DRP (pair) DRT (3 cores) DRQ (4 cores) family, multicore UV laser printable jacketed cable - Product standard

This European standard specifies the characteristics of UV laser printable multicore jacketed electrical cables for use in the on-board electrical systems of aircraft at operating temperatures between −55 °C and 200 °C.
It shall also be possible to mark these cables by qualified compatible marking. These markings shall be in accordance with EN 3838.

Luft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung - Betriebstemperaturen zwischen -55 °C und 200 °C - Teil 008: DRP- (zweiadrig), DRT- (dreiadrig), DRQ- (vieradrig) Leitungsfamilie, mehradrige, UV-Laser-bedruckbare, ummantelte Leitungen - Produktnorm

Série aérospatiale - Câbles, électriques, d'usage général - Températures de foncitionnement comprises entre -55 °C et 200 °C - Partie 008: DRP (paire) DRT (tierce) DRQ (quarte) multiconducteurs gainés marquables au laser UV - Norme de produit

La présente Norme européenne spécifie les caractéristiques des câbles électriques multiconducteurs gainés marquables au laser UV, utilisés dans les systèmes électriques de bord des aéronefs à des températures de fonctionnement comprises entre  55 °C et 200 °C.
Il doit également être possible de marquer ces câbles par des marquages compatibles qualifiés. Ces marquages doivent être conformes à l’EN 3838.

Aeronavtika - Električni kabli za splošno uporabo - Delovne temperature med –55 °C in 200 °C - 008. del: Družina DRP (dvožilni), DRT (trižilni), DRQ (štirižilni), večžilni, oplaščeni, z možnostjo UV-laserskega tiskanja

Ta evropski standard določa značilnosti večžilnih oplaščenih električnih kablov z možnostjo UV-laserskega tiskanja za uporabo v električnih sistemih na letalih pri delovnih temperaturah med –55 °C in 200 °C. Te kable mora biti mogoče označiti s kvalificirano združljivo oznako. Te oznake morajo biti v skladu z EN 3838.

General Information

• Status: Withdrawn
• Publication Date: 02-Sep-2015
• Withdrawal Date: 07-Dec-2022
• ICS: 29.060.20 - Cables
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 08-Dec-2022
• Due Date: 31-Dec-2022
• Completion Date: 08-Dec-2022
• Ref Project: EN 2266-008:2015 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 008: DRP (pair) DRT (3 cores) DRQ (4 cores) family, multicore UV laser printable jacketed cable - Product standard

Relations

• Replaced By: SIST EN 2266-008:2023 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 008: DRP (pair) DRT (3 cores) DRQ (4 cores) family, multicore UV laser printable jacketed cable - Product standard
• Effective Date: 07-Dec-2022
• Revised: SIST EN 2266-008:2023 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 008: DRP (pair) DRT (3 cores) DRQ (4 cores) family, multicore UV laser printable jacketed cable - Product standard
• Effective Date: 15-May-2019

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung - Betriebstemperaturen zwischen -55 °C und 200 °C - Teil 008: DRP- (zweiadrig), DRT- (dreiadrig), DRQ- (vieradrig) Leitungsfamilie, mehradrige, UV-Laser-bedruckbare, ummantelte Leitungen - ProduktnormSérie aérospatiale - Câbles, électriques, d'usage général - Températures de foncitionnement comprises entre -55 °C et 200 °C - Partie 008: DRP (paire) DRT (tierce) DRQ (quarte) multiconducteurs gainés marquables au laser UV - Norme de produitAerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 008: DRP (pair) DRT (3 cores) DRQ (4 cores) family, multicore UV laser printable jacketed cable - Product standard49.060Aerospace electric equipment and systems29.060.20KabliCablesICS:Ta slovenski standard je istoveten z:EN 2266-008:2015SIST EN 2266-008:2015en,fr,de01-oktober-2015SIST EN 2266-008:2015SLOVENSKI
STANDARD



SIST EN 2266-008:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2266-008
July 2015 ICS 49.060 English Version
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 008: DRP (pair) DRT (3 cores) DRQ (4 cores) family, multicore UV laser printable jacketed cable - Product standard
Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre -55 °C et 200 °C - Partie 008: DRP (paire) DRT (tierce) DRQ (quarte) multiconducteurs gainés marquables au laser UV - Norme de produit
Luft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung - Betriebstemperaturen zwischen -55 °C und 200 °C - Teil 008: DRP- (zweiadrig), DRT- (dreiadrig), DRQ-(vieradrig) Leitungsfamilie, mehradrige, UV-Laser-bedruckbare, ummantelte Leitungen - Produktnorm This European Standard was approved by CEN on 7 February 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2266-008:2015 ESIST EN 2266-008:2015



EN 2266-008:2015 (E) 2 Contents
Page European foreword .3 1 Scope .4 2 Normative references .4 3 Terms, definitions and symbols .5 4 Materials and construction .5 5 Required characteristics .7 6 Quality assurance .8 7 Designation .9 8 Identification and marking .9 9 Packaging, labelling and delivery lengths .9 10 Technical specification .9
SIST EN 2266-008:2015



EN 2266-008:2015 (E) 3 European foreword This document (EN 2266-008:2015) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this European Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2016, and conflicting national standards shall be withdrawn at the latest by January 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 2266-008:2015



EN 2266-008:2015 (E) 4 1 Scope This European Standard specifies the characteristics of UV laser printable multicore jacketed electrical cables for use in the on-board electrical systems of aircraft at operating temperatures between −55 °C and 200 °C. It shall also be possible to mark these cables by qualified compatible marking. These markings shall be in accordance with EN 3838. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2083, Aerospace series — Copper and copper alloys conductors for electrical cables — Product standard EN 2235, Aerospace series — Single and multicore electrical cables, screened and jacketed EN 2267-002, Aerospace series — Cables, electrical, for general purpose — Operating temperatures between −55 °C and 260 °C — Part 002: General EN 2267-009, Aerospace series — Cables, electrical, for general purpose — Operating temperatures between −55 °C and 260 °C — Part 009: DRA family, single and multicore assembly — Product standard
EN 3475-100, Aerospace series — Cables, electrical, aircraft use — Test methods — P
...