Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)

This European Standard specifies a method for the determination of the flexural creep stiffness of bituminous binders in the range of 30 MPa to 1 GPa by means of the bending beam rheometer.

Bitumen und bitumenhaltige Bindemittel - Bestimmung der Biegekriechsteifigkeit - Biegebalkenrheometer (BBR)

Diese Europäische Norm legt ein Verfahren zur Bestimmung der Biegekriechsteifigkeit von bitumenhaltigen Bindemitteln im Bereich von 30 MPa bis 1 GPa mit einem Biegebalkenrheometer fest.
WARNUNG - Die Anwendung dieser Europäischen Norm kann den Umgang mit gefährlichen Sub-stanzen und Ausrüstungsteilen und die Ausführung gefährlicher Arbeitsgänge einschließen. Diese Europäische Norm erhebt nicht den Anspruch, alle mit ihrer Anwendung verbundenen Sicherheitspro-bleme anzusprechen. Es liegt in der Verantwortung des Anwenders dieser Europäischen Norm, geeig-nete Verhaltensregeln für den Arbeits- und Gesundheitsschutz festzulegen und vor der Anwendung zu klären, ob einschränkende Vorschriften zu berücksichtigen sind.

Bitumes et liants bitumineux - Détermination du module de rigidité en flexion - Rhéomètre à flexion de barreau (BBR)

Le présent document spécifie une méthode permettant de déterminer le module de rigidité en flexion des liants bitumineux dans la plage de 30 MPa à 1 GPa au moyen d'un rhéomètre à flexion de barreau (BBR).
AVERTISSEMENT - L'utilisation de la présente Norme européenne peut impliquer l'intervention de produits, d'opérations et d'équipements à caractère dangereux. La présente Norme européenne n'est pas censée aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.

Bitumen in bitumenska veziva - Ugotavljanje upogibne togosti - Reometer z nosilcem, obremenjenim na upogib (BBR)

Ta evropski standard določa metodo za ugotavljanje upogibne togosti bitumenskih veziv v razponu od 30 MPa do 1 GPa z reometrom z nosilcem, obremenjenim na upogib.

General Information

Status
Withdrawn
Public Enquiry End Date
19-Jan-2012
Publication Date
06-Aug-2012
Withdrawal Date
11-Oct-2023
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
12-Sep-2023
Due Date
05-Oct-2023
Completion Date
12-Oct-2023

Relations

Buy Standard

Standard
EN 14771:2012
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k FprEN 14771:2011
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumen in bitumenska veziva - Ugotavljanje upogibne togosti - Reometer z nosilcem, obremenjenim na upogib (BBR)Bitumen und bitumenhaltige Bindemittel - Bestimmung der Biegekriechsteifigkeit - Biegebalkenrheometer (BBR)Bitumes et liants bitumineux - Détermination du module de rigidité en flexion - Rhéomètre à flexion de barreau (BBR)Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 14771:2012SIST EN 14771:2012en,fr,de01-september-2012SIST EN 14771:2012SLOVENSKI
STANDARDSIST EN 14771:20051DGRPHãþD



SIST EN 14771:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14771
May 2012 ICS 75.140; 91.100.50 Supersedes EN 14771:2005English Version
Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)
Bitumes et liants bitumineux - Détermination du module de rigidité en flexion - Rhéomètre à flexion de barreau (BBR) Bitumen und bitumenhaltige Bindemittel - Bestimmung der Biegekriechsteifigkeit - Biegebalkenrheometer (BBR) This European Standard was approved by CEN on 7 April 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14771:2012: ESIST EN 14771:2012



EN 14771:2012 (E) 2 Contents page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Principle .55 Apparatus .56 Preparation of test samples .67 Procedure .78 Calculation .89 Expression of results .910 Precision . 1011 Test report . 10Bibliography . 15 SIST EN 14771:2012



EN 14771:2012 (E) 3 Foreword This document (EN 14771:2012) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumen in bitumenska veziva – Ugotavljanje upogibne togosti – Reometer z nosilcem, obremenjenim na upogib (BBR)Bitumen und bitumenhaltige Bindemittel - Bestimmung der Biegekriechsteifigkeit - Biegebalkenrheometer (BBR)Bitumes et liants bitumineux - Détermination du module de rigidité en flexion - Rhéomètre à flexion de barreau (BBR)Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:FprEN 14771kSIST FprEN 14771:2011en,fr,de01-december-2011kSIST FprEN 14771:2011SLOVENSKI
STANDARD



kSIST FprEN 14771:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 14771
October 2011 ICS 75.140; 91.100.50 Will supersede EN 14771:2005English Version
Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)
Bitumes et liants bitumineux - Détermination du module de rigidité en flexion - Rhéomètre à flexion de barreau (BBR) Bitumen und bitumenhaltige Bindemittel - Bestimmung der Biegekriechsteifigkeit - Biegebalkenrheometer (BBR) This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 336.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 14771:2011: EkSIST FprEN 14771:2011



FprEN 14771:2011 (E) 2 Contents page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Principle .55 Apparatus .56 Preparation of test samples .67 Procedure .78 Calculation .89 Expression of results .910 Precision . 1011 Test report .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.