SIST EN ISO 8130-13:2019
(Main)Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2019)
Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2019)
This document specifies a method for the determination of the equivalent-sphere particle size
distribution of coating powders by laser diffraction, for particles of the size range from 1 μm to 300 μm.
NOTE There is a possibility that particle sizes >300 μm need the use of a different optical model.
This document is specific for the measurement of coating powders and also draws attention to
ISO 13320, which provides guidance on instrument qualification and particle size distribution.
Laser diffraction is not suitable for determining oversize material, which can be verified by sieve
analysis as described in ISO 8130-1 or by dynamic image analysis as described in ISO 13322-2.
Pulverlacke - Teil 13: Teilchengrößenanalyse durch Laserbeugung (ISO 8130-13:2019)
Dieses Dokument legt ein Verfahren zum Bestimmen der Teilchengrößenverteilung von Pulverlacken durch Laserbeugung anhand des Äquivalentdurchmessers der Teilchen im Größenbereich von 1 µm bis 300 µm fest.
ANMERKUNG Es besteht die Möglichkeit, dass Teilchengrößen > 300 μm die Anwendung eines anderen optischen Modells erfordern.
Dieses Dokument ist speziell für die Messung von Beschichtungspulvern und lenkt die Aufmerksamkeit auf ISO 13320, die Hinweise zur Eignung von Geräten und zur Teilchengrößenverteilung gibt.
Die Teilchengrößenanalyse durch Laserbeugung eignet sich nicht zur Bestimmung des Überkorns, welches mittels der in ISO 8130 1 beschriebenen Siebanalyse oder durch die in ISO 13322 2 beschriebene dyna-mische Bildanalyse nachgewiesen werden kann.
Poudres pour revêtement - Partie 13: Analyse granulométrique par diffraction laser (ISO 8130-13:2019)
Le présent document spécifie une méthode de détermination par diffraction laser de la distribution granulométrique, en diamètre sphérique équivalent, de poudres pour revêtement, pour des tailles de particules comprises entre 1 µm et 300 µm.
NOTE Il y a une possibilité que les tailles de particules > 300 µm nécessitent l'utilisation d'un modèle optique différent.
Le présent document est spécifiquement destiné au mesurage de poudres pour revêtement et attire également l'attention sur l'ISO 13320, qui fournit des recommandations relatives à l'évaluation de l'appareil et à la distribution granulométrique.
La diffraction laser ne convient pas à la détermination du refus, qui peut être vérifiée au moyen d'une analyse par tamisage telle que décrite dans l'ISO 8130-1 ou par analyse d'images dynamiques telle que décrite dans l'ISO 13322-2.
Praškasti premazi - 13. del: Granulometrijska analiza z lasersko difrakcijo (ISO 8130-13:2019)
Ta dokument določa metodo za ugotavljanje porazdelitve velikosti ekvivalentnih sferičnih delcev praškastih premazov z lasersko difrakcijo, in sicer za velikost delcev od 1 μm do 300 μm.
OPOMBA: Obstaja možnost, da je treba pri velikostih delcev > 300 μm uporabiti drugačen optični model. Ta dokument je specifičen za merjenje praškastih premazov in usmerja pozornost na standard ISO 13320, ki podaja smernice za ustreznost instrumentov in porazdelitev velikosti delcev. Laserska difrakcija ni primerna za ugotavljanje prevelikega materiala, kar je mogoče preveriti s sejalno analizo, kot je opisano v standardu ISO 8130-1, ali z analizo dinamične slike, kot je opisano v standardu ISO 13322-2.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 8130-13:2019
01-julij-2019
Nadomešča:
SIST EN ISO 8130-13:2012
Praškasti premazi - 13. del: Granulometrijska analiza z lasersko difrakcijo (ISO
8130-13:2019)
Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2019)
Pulverlacke - Teil 13: Teilchengrößenanalyse durch Laserbeugung (ISO 8130-13:2019)
Poudres pour revêtement - Partie 13: Analyse granulométrique par diffraction laser (ISO
8130-13:2019)
Ta slovenski standard je istoveten z: EN ISO 8130-13:2019
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 8130-13:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 8130-13:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 8130-13:2019
EN ISO 8130-13
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2019
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 8130-13:2010
English Version
Coating powders - Part 13: Particle size analysis by laser
diffraction (ISO 8130-13:2019)
Poudres pour revêtement - Partie 13: Analyse Pulverlacke - Teil 13: Teilchengrößenanalyse durch
granulométrique par diffraction laser (ISO 8130- Laserbeugung (ISO 8130-13:2019)
13:2019)
This European Standard was approved by CEN on 8 March 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8130-13:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 8130-13:2019
EN ISO 8130-13:2019 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 8130-13:2019
EN ISO 8130-13:2019 (E)
European foreword
This document (EN ISO 8130-13:2019) has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2019, and conflicting national standards
shall be withdrawn at the latest by November 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8130-13:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 8130-13:2019 has been approved by CEN as EN ISO 8130-13:2019 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 8130-13:2019
---------------------- Page: 6 ----------------------
SIST EN ISO 8130-13:2019
INTERNATIONAL ISO
STANDARD 8130-13
Second edition
2019-04
Coating powders —
Part 13:
Particle size analysis by laser
diffraction
Poudres pour revêtement —
Partie 13: Analyse granulométrique par diffraction laser
Reference number
ISO 8130-13:2019(E)
©
ISO 2019
---------------------- Page: 7 ----------------------
SIST EN ISO 8130-13:2019
ISO 8130-13:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 8130-13:2019
ISO 8130-13:2019(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Sampling . 2
7 Test conditions . 2
8 Procedure. 2
8.1 General . 2
8.2 Precautions . 2
8.3 Testing . 3
8.3.1 Sample preparation . 3
8.3.2 Measurement . 3
8.3.3 Instrument performance . 3
8.3.4 Selection of an appropriate optical model . 3
9 Analysis . 4
9.1 General . 4
9.2 Reference materials . 4
9.3 Accuracy . 4
9.4 Precision . 4
9.4.1 Repeatability . 4
9.4.2 Reproducibility . 5
10 Error sources . 5
11 Expression of results . 5
12 Test report . 5
Bibliography . 7
© ISO 2019 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 8130-13:2019
ISO 8130-13:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee
SC 9, General test methods for paints and varnishes.
This second edition cancels and replaces the first edition (ISO 8130-13:2001), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— clauses on precautions, accuracy, reference materials and error sources have been added;
— the requirements concerning the analyser (5.1) are more detailed and description of the testing
(8.3) has been extended;
— the test report has been amended to be more detailed;
— the text has been editorially revised and the normative references have been updated.
A list of all the parts in the ISO 8130 series can be found on the ISO website.
Any feedback or questions on this document should be
...
SLOVENSKI STANDARD
oSIST prEN ISO 8130-13:2018
01-junij-2018
Praškasti premazi - 13. del: Granulometrijska analiza z lasersko difrakcijo (ISO/DIS
8130-13:2018)
Coating powders - Part 13: Particle size analysis by laser diffraction (ISO/DIS 8130-
13:2018)
Pulverlacke - Teil 13: Teilchengrößenanalyse durch Laserbeugung (ISO/DIS 8130-
13:2018)
Poudres pour revêtement - Partie 13: Analyse granulométrique par diffraction laser
(ISO/DIS 8130-13:2018)
Ta slovenski standard je istoveten z: prEN ISO 8130-13
ICS:
87.040 Barve in laki Paints and varnishes
oSIST prEN ISO 8130-13:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 8130-13:2018
---------------------- Page: 2 ----------------------
oSIST prEN ISO 8130-13:2018
DRAFT INTERNATIONAL STANDARD
ISO/DIS 8130-13
ISO/TC 35/SC 9 Secretariat: BSI
Voting begins on: Voting terminates on:
2018-04-03 2018-06-26
Coating powders —
Part 13:
Particle size analysis by laser diffraction
Poudres pour revêtement —
Partie 13: Analyse granulométrique par diffraction laser
ICS: 87.040
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 8130-13:2018(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2018
---------------------- Page: 3 ----------------------
oSIST prEN ISO 8130-13:2018
ISO/DIS 8130-13:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 8130-13:2018
ISO/DIS 8130-13:2018(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Sampling . 2
7 Test conditions . 2
8 Procedure. 2
8.1 General . 2
8.2 Precautions . 3
8.3 Testing . 3
8.3.1 Sample preparation . 3
8.3.2 Measurement . 3
8.3.3 Instrument performance . 3
8.3.4 Selection of an appropriate optical model . 3
9 Analysis . 4
9.1 General . 4
9.2 Reference materials . 4
9.3 Accuracy . 4
9.4 Precision . 4
9.4.1 Repeatability . 4
9.4.2 Reproducibility . 5
10 Error sources . 5
11 Expression of results . 5
12 Test report . 5
© ISO 2018 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 8130-13:2018
ISO/DIS 8130-13:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee
SC 9, General test methods for paints and varnishes.
This second edition cancels and replaces the first edition (ISO 8130-13:2001), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— clauses on precautions, accuracy, reference materials and error sources have been added;
— the test report has been amended to be more detailed;
— the text has been editorially revised and the normative references have been updated.
A list of all parts in the ISO 8130- series can be found on the ISO website.
iv © ISO 2018 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 8130-13:2018
DRAFT INTERNATIONAL STANDARD ISO/DIS 8130-13:2018(E)
Coating powders —
Part 13:
Particle size analysis by laser diffraction
1 Scope
This part of ISO 8130 specifies a method for the determination of the equivalent-sphere particle size
distribution of coating powders by laser diffraction, for particles of the size range from 1 µm to 300 µm.
NOTE Particle sizes > 300 µm may well require the use of a different optical model.
This document is specific for the measurement of coating powders and also engages ISO 13320, which
provides guidance on instrument qualification and particle size distribution.
Laser diffraction is not suitable for determining oversize material, which can be verified by sieve
analysis as specified in ISO 8130-1 or by dynamic image analysis as specified in ISO 13322-2.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 291, Plastics — Standard atmospheres for conditioning and testing
ISO 8130-14, Coating powders — Part 14: Terminology
ISO 9276-1, Representation of results of particle size analysis — Part 1: Graphical representation
ISO 9276-2, Representation of results of particle size analysis — Part 2: Calculation of average particle
siz
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.