EN ISO 8130-13:2019
(Main)Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2019)
Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2019)
This document specifies a method for the determination of the equivalent-sphere particle size distribution of coating powders by laser diffraction, for particles of the size range from 1 µm to 300 µm.
NOTE There is a possibility that particle sizes >300 µm need the use of a different optical model.
This document is specific for the measurement of coating powders and also draws attention to ISO 13320, which provides guidance on instrument qualification and particle size distribution.
Laser diffraction is not suitable for determining oversize material, which can be verified by sieve analysis as described in ISO 8130‑1 or by dynamic image analysis as described in ISO 13322‑2.
Pulverlacke - Teil 13: Teilchengrößenanalyse durch Laserbeugung (ISO 8130-13:2019)
Dieses Dokument legt ein Verfahren zum Bestimmen der Teilchengrößenverteilung von Pulverlacken durch Laserbeugung anhand des Äquivalentdurchmessers der Teilchen im Größenbereich von 1 µm bis 300 µm fest.
ANMERKUNG Es besteht die Möglichkeit, dass Teilchengrößen > 300 μm die Anwendung eines anderen optischen Modells erfordern.
Dieses Dokument ist speziell für die Messung von Beschichtungspulvern und lenkt die Aufmerksamkeit auf ISO 13320, die Hinweise zur Eignung von Geräten und zur Teilchengrößenverteilung gibt.
Die Teilchengrößenanalyse durch Laserbeugung eignet sich nicht zur Bestimmung des Überkorns, welches mittels der in ISO 8130 1 beschriebenen Siebanalyse oder durch die in ISO 13322 2 beschriebene dyna-mische Bildanalyse nachgewiesen werden kann.
Poudres pour revêtement - Partie 13: Analyse granulométrique par diffraction laser (ISO 8130-13:2019)
Le présent document spécifie une méthode de détermination par diffraction laser de la distribution granulométrique, en diamètre sphérique équivalent, de poudres pour revêtement, pour des tailles de particules comprises entre 1 µm et 300 µm.
NOTE Il y a une possibilité que les tailles de particules > 300 µm nécessitent l'utilisation d'un modèle optique différent.
Le présent document est spécifiquement destiné au mesurage de poudres pour revêtement et attire également l'attention sur l'ISO 13320, qui fournit des recommandations relatives à l'évaluation de l'appareil et à la distribution granulométrique.
La diffraction laser ne convient pas à la détermination du refus, qui peut être vérifiée au moyen d'une analyse par tamisage telle que décrite dans l'ISO 8130-1 ou par analyse d'images dynamiques telle que décrite dans l'ISO 13322-2.
Praškasti premazi - 13. del: Granulometrijska analiza z lasersko difrakcijo (ISO 8130-13:2019)
Ta dokument določa metodo za ugotavljanje porazdelitve velikosti ekvivalentnih sferičnih delcev praškastih premazov z lasersko difrakcijo, in sicer za velikost delcev od 1 μm do 300 μm.
OPOMBA: Obstaja možnost, da je treba pri velikostih delcev > 300 μm uporabiti drugačen optični model. Ta dokument je specifičen za merjenje praškastih premazov in usmerja pozornost na standard ISO 13320, ki podaja smernice za ustreznost instrumentov in porazdelitev velikosti delcev. Laserska difrakcija ni primerna za ugotavljanje prevelikega materiala, kar je mogoče preveriti s sejalno analizo, kot je opisano v standardu ISO 8130-1, ali z analizo dinamične slike, kot je opisano v standardu ISO 13322-2.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 8130-13:2019
01-julij-2019
Nadomešča:
SIST EN ISO 8130-13:2012
Praškasti premazi - 13. del: Granulometrijska analiza z lasersko difrakcijo (ISO
8130-13:2019)
Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2019)
Pulverlacke - Teil 13: Teilchengrößenanalyse durch Laserbeugung (ISO 8130-13:2019)
Poudres pour revêtement - Partie 13: Analyse granulométrique par diffraction laser (ISO
8130-13:2019)
Ta slovenski standard je istoveten z: EN ISO 8130-13:2019
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 8130-13:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 8130-13:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 8130-13:2019
EN ISO 8130-13
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2019
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 8130-13:2010
English Version
Coating powders - Part 13: Particle size analysis by laser
diffraction (ISO 8130-13:2019)
Poudres pour revêtement - Partie 13: Analyse Pulverlacke - Teil 13: Teilchengrößenanalyse durch
granulométrique par diffraction laser (ISO 8130- Laserbeugung (ISO 8130-13:2019)
13:2019)
This European Standard was approved by CEN on 8 March 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8130-13:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 8130-13:2019
EN ISO 8130-13:2019 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 8130-13:2019
EN ISO 8130-13:2019 (E)
European foreword
This document (EN ISO 8130-13:2019) has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2019, and conflicting national standards
shall be withdrawn at the latest by November 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8130-13:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 8130-13:2019 has been approved by CEN as EN ISO 8130-13:2019 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 8130-13:2019
---------------------- Page: 6 ----------------------
SIST EN ISO 8130-13:2019
INTERNATIONAL ISO
STANDARD 8130-13
Second edition
2019-04
Coating powders —
Part 13:
Particle size analysis by laser
diffraction
Poudres pour revêtement —
Partie 13: Analyse granulométrique par dif
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.