oSIST prEN ISO 20957-7:2022

Stationary training equipment - Part 7: Rowing equipment, additional specific safety requirements and test methods (ISO/DIS 20957-7:2022)

This document specifies safety requirements for rowing equipment.
This document is intended to be read in conjunction with the general safety requirements of ISO 20957‑1.
This document is applicable to rowing type stationary training equipment, hereinafter referred to as rowing equipment, within the classes H, S and I and classes A, B and C regarding accuracy.

Stationäre Trainingsgeräte – Teil 7: Rudergeräte, zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren (ISO/DIS 20957-7:2022)

Équipement d'entraînement fixe - Partie 7: Rameurs, exigences spécifiques de sécurité et méthodes d'essai supplémentaires (ISO/DIS 20957-7:2022)

Le présent document spécifie des exigences de sécurité relatives aux rameurs.
Il est prévu que le présent document soit lu conjointement aux exigences de sécurité générales de l'ISO 20957-1.
Le présent document s'applique aux équipements d'entraînement fixes de type rameurs, désignés ci-après par «rameurs», concernant les classes H, S et I, ainsi que les classes A, B et C pour l'exactitude.

Nepremična oprema za vadbo - 7. del: Oprema za veslanje, dodatne posebne varnostne zahteve in preskusne metode (ISO/DIS 20957-7:2022)

General Information

• Status: Not Published
• Public Enquiry End Date: 29-Jun-2022
• ICS: 97.220.30 - Indoor sports equipment
• Technical Committee: SPO - Sports
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 05-Nov-2024
• Due Date: 10-Nov-2024
• Completion Date: 05-Nov-2024
• Directive: 2001/95/EC - Directive 2001/95/EC of the European Parliament and of the Council of 3 December 2001 on general product safety
• Mandate: M/506 - Standardisation mandate issued to the European standardisation organisations (ESOs) to develop European standards for stationary training equipment
• Ref Project: prEN ISO 20957-7 - Stationary training equipment - Part 7: Rowing machines, additional specific safety requirements and test methods

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2022
Nepremična oprema za vadbo - 7. del: Oprema za veslanje, dodatne posebne
varnostne zahteve in preskusne metode (ISO/DIS 20957-7:2022)
Stationary training equipment - Part 7: Rowing equipment, additional specific safety
requirements and test methods (ISO/DIS 20957-7:2022)
Stationäre Trainingsgeräte – Teil 7: Rudergeräte, zusätzliche besondere
sicherheitstechnische Anforderungen und Prüfverfahren (ISO/DIS 20957-7:2022)
Équipement d'entraînement fixe - Partie 7: Rameurs, exigences spécifiques de sécurité
et méthodes d'essai supplémentaires (ISO/DIS 20957-7:2022)
Ta slovenski standard je istoveten z: prEN ISO 20957-7
ICS:
97.220.30 Oprema za dvoranske športe Indoor sports equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT INTERNATIONAL STANDARD
ISO/DIS 20957-7
ISO/TC 83 Secretariat: DIN
Voting begins on: Voting terminates on:
2022-04-13 2022-07-06
Stationary training equipment —
Part 7:
Rowing equipment, additional specific safety requirements
and test methods
Équipement d'entraînement fixe —
Partie 7: Rameurs, exigences spécifiques de sécurité et méthodes d'essai supplémentaires
ICS: 97.220.30
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 20957-7:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

ISO/DIS 20957-7:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
ISO/DIS 20957-7:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 3
4.1 General . 3
4.2 Accuracy classes. 3
4.3 Usage classes . 4
5 Safety requirements. 4
5.1 General . 4
5.2 External construction . 4
5.2.1 Squeeze, shear and reciprocating points within the accessible area . 4
5.2.2 Transmission elements and rotating parts . 4
5.2.3 Temperature rise of accessible surfaces . 4
5.2.4 Seat . 4
5.3 Intrinsic loading . 4
5.4 Handles . 5
5.5 Load of ropes, belts, chains and their attachment components . 5
5.6 Foot strap . 5
5.7 Foot support . 5
5.8 Endurance . 5
5.9 Stability . 6
5.10 Requirements for class A . 6
5.11 Additional instructions for use . 6
6 Test methods . 6
6.1 General . 6
6.1.1 Dimensional check . 6
6.1.2 Visual examination . 6
6.1.3 Tactile examination . 6
6.1.4 Performance test . 6
6.1.5 Weighing test . 6
6.1.6 Load test of ropes, belts, chains and attachment components. . 6
6.2 Testing of seat . 6
6.3 Testing of temperature rise . 7
6.4 Testing of intrinsic loading . 7
6.5 Testing of foot strap . 7
6.6 Testing of foot support . 7
6.7 Endurance testing . 8
6.8 Testing of stability . 8
6.9 Testing of additional requirements for class A . 8
6.9.1 General . 8
6.9.2 Rowing equipment using speed-independent resistance system . 8
6.9.3 Rowing equipment using speed-dependent resistance system . 9
7 Test report . 9
Annex ZA (informative) Relationship between this European Standard and the safety
requirements of Directive 2001/95/EC aimed to be covered .10
iii
ISO/DIS 20957-7:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 83, Sports and other recreational facilities
and equipment, in collaboration with the European Committee for Standardization (CEN) Technical
Committee CEN/TC 136, Sports, playground and other recreational facilities and equipment, in
accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This third edition cancels and replaces the second edition (ISO 20957-7:2020), which has been
technically revised.
The main changes compared to the previous edition are as follows:
— referenced standards have been updated with year of edition;
— Clause 4 has been specified and restructured;
— acceptance criteria have been updated for 5.6, 5.7, and 5.8;
— Clause 7 has been restructured;
A list of all parts in the ISO 20957 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
...