SIST EN 14733:2005/kFprA1:2010

Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control

This EN specifies a method for determining the tensile properties of a bituminous binder, in particular those of polymer-modified bitumens by means of a force ductility test.

Bitumen und bitumenhaltige Bindemittel - Werkseigene Produktionskontrolle von Bitumenemulsionen, gefluxtem und verschnittenem Bitumen

Bitumes et liants bitumineux - Maîtrise de la production en usine des émulsions de bitume, des bitumes fluxés et fluidifiés

Bitumen in bitumenska veziva - Kontrola proizvodnje v obratih za proizvodnjo bitumenskih emulzij ter fluksiranih in rezanih bitumnov

General Information

• Status: Not Published
• Public Enquiry End Date: 14-Jun-2010
• ICS: 75.140 - Waxes, bituminous materials and other petroleum products
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: VLA - Water proofing
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 09-Mar-2011
• Due Date: 14-Mar-2011
• Completion Date: 09-Mar-2011
• Directive: 89/106/EEC - Construction products
• Ref Project: EN 14733:2005/FprA1 - Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control

Relations

• Amends: SIST EN 14733:2005 - Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control
• Effective Date: 01-Jun-2010
• Consolidated By: SIST EN 14733:2005+A1:2011 - Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control
• Effective Date: 18-Jan-2023
• Consolidated By: SIST EN 14733:2005+A1:2011 - Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control
• Effective Date: 19-Jan-2023
• Consolidated By: SIST EN 14733:2005+A1:2011 - Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control
• Effective Date: 01-Apr-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14733:2005/kFprA1:2010
01-junij-2010
Bitumen in bitumenska veziva - Kontrola proizvodnje v obratih za proizvodnjo
bitumenskih emulzij ter fluksiranih in rezanih bitumnov
Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen
factory production control
Bitumen und bitumenhaltige Bindemittel - Werkseigene Produktionskontrolle von
Bitumenemulsionen, gefluxtem und verschnittenem Bitumen
Bitumes et liants bitumineux - Maîtrise de la production en usine des émulsions de
bitume, des bitumes fluxés et fluidifiés
Ta slovenski standard je istoveten z: EN 14733:2005/FprA1
ICS:
75.140 Voski, bitumni in drugi naftni Waxes, bituminous materials
proizvodi and other petroleum products
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN 14733:2005/kFprA1:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14733:2005/kFprA1:2010

---------------------- Page: 2 ----------------------

SIST EN 14733:2005/kFprA1:2010


EUROPEAN STANDARD
FINAL DRAFT
EN 14733:2005
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
April 2010
ICS 75.140; 91.100.50
English Version
Bitumen and bituminous binders - Bituminous emulsions, fluxed
and cut-back bitumen factory production control
Bitumes et liants bitumineux - Maîtrise de la production en Bitumen und bitumenhaltige Bindemittel - Werkseigene
usine des émulsions de bitume, des bitumes fluxés et Produktionskontrolle von Bitumenemulsionen, gefluxtem
fluidifiés und verschnittenem Bitumen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 336.

This draft amendment A1, if approved, will modify the European Standard EN 14733:2005. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14733:2005/FprA1:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14733:2005/kFprA1:2010
EN 14733:2005/FprA1:2010 (E)
Contents Page
Foreword . 3
1 Modification to Clause 2 . 4
2 Modification to 4.1 . 5
3 Modification to 6.1 . 5
4 Modification to 6.3 . 5
5 Modification to Clause 10 . 6

2

---------------------- Page: 4 ----------------------

SIST EN 14733:2005/kFprA1:2010
EN 14733:2005/FprA1:2010 (E)
Foreword
This document (EN 14733:2005/FprA1:2010) has been prepared by Technical Committee CEN/TC 336
“Bituminous binders”, the secretariat of which is held by AFNOR.
This document is currently submitted to the Unique Acceptance Procedure.
3

---------------------- Page: 5 ----------------------

SIST EN 14733:2005/kFprA1:2010
EN 14733:2005/FprA1:2010 (E)
1 Modification to Clause 2
Replace "EN 12846, Bitumen and bituminous binders ― Determination of the efflux time of bitumen emulsions
by the efflux viscosimeter" with "prEN 12846-1, Bitumen and bituminous binders ― Determination of efflux
time by the efflux viscometer ― Part 1 : Bituminous emulsions" and "prEN 12846-2, Bitumen and bituminous
binders ― Determination of efflux time by the efflux viscometer ― Part 2 : Cut-back and fluxed bituminous
binders".
Replace "EN 13074, Bitumen and bituminous binders ― Recovery of binder from emulsion by evaporation"
with "prEN 13074-1:2008, Bitumen and bituminous binders ― Recovery of binder from bituminous emulsion
or from cut-back or fluxed bitumen by evaporation" and "prEN 13074-2, Bitumen and bituminous binders ―
Stabilisation of binder from bituminous emulsion or from cut-back or fluxed bitumen after recovery".
Add the following references:
"EN 12592, Bitumen and bituminous binders ― Determination of solubility"
"EN 12847, Bitumen and bituminous binders ― Determination of settling tendency of bituminous emulsions"
"EN 13302, Bitumen and bituminous binders ― Determination of dynamic viscosity of bituminous binder using
a rotating spindle apparatus"
"EN 13398, Bitumen and bituminous binders ― Determination of the elastic recovery of modified bitumen"
"EN 13614, Bitumen and bituminous binders ― Determination of adhesivity of bitumen emulsions by water
immersion test ― Aggregate method"
"EN 13808, Bitumen and bituminous binders ― Framework for specifying cationic bituminous emulsions"
"EN 15322, Bitumen and bituminous binders ― Framework for specifying cut-back and fluxed bituminous
binders
EN 15626, Bitumen and bituminous binders ― Determination of adhesivity of cut-back and fluxed bituminous
binders by water immersion test ― Aggregate method

EN ISO 2592, Determination of flash and fire points ― Cleveland open cup method (ISO 2592:2000)"
"EN ISO 13736, Determination of flash point ― Abel closed cup method (ISO 13736:2008)"
Delete reference to EN 13357.
Replace "prEN 14769, Bitumen and bituminous binders ― Accelerated long-term ageing - Pressure Ageing
Vessel (PAV)" with "EN 14769, Bitumen and bituminous binders ― Accelerated long-term ageing conditioning
by a Pressure Ageing Vessel (PAV)",
Delete reference to prEN 14895 and prEN 14896.
Replace the title of EN 1431 with the following: "Bitumen and bituminous binders ― Determination of residual
binder and oil distillate from bitumen emulsions by distillation".
Replace the title of EN ISO 9001 with the following: "Quality management systems ― Requirements
(ISO 9001:2008).


4

---------------------- Page: 6 ----------------------

SIST EN 14733:2005/kFprA1:2010
EN 14733:2005/FprA1:2010 (E)

2 Modification to 4.1
Replace the existing text of sub-clause 4.1 and its heading with the following:
"
4.1 Factory Production Control (FPC): general
The producer shall operate a documented Factory Production Control (FPC) system complying with the
requirements of this document. The manufacturer shall establish, document and maintain an FPC system to
ensure that the products placed on the market conform to the stated characteristics. The FPC system shall
consist of procedures, regular inspections and tests and/or assessments and the use of the results to control
the quality of the finished product.
An FPC system conforming to the requirements of EN ISO 9001 and made specific to the requirements of this
standard shall be deemed to satisfy the above requirements."

3 Modification to 6.1
Replace the existing text of sub-clause 6.1 with the following:

"All necessary facilities, equipment and personnel shall be available to carry out the required inspections and
tests.
Inspection and testing shall be carried out at least as frequently as indicated in Table 1 to Table 5."

4 Modification to 6.3
Replace the existing text of sub-clause 6.3 with the following:
"
6.3.1 General
The finished binders shall be inspected and tested using procedures detailed in the Quality Plan and to a
schedule complying with the requirements of this clause and Table 4 and Table 5.
Appropriate statistical records shall be maintained in order to monitor and verify process capability and
product characteristics.
6.3.2 Definition of a batch
Two definitions are accepted function of the production scheme and the production parameters (registration of
production and components, calibration of the equipment).
1) The quantity of (bituminous) binder produced and stored in one tank once the production run into
that tank has been completed. The batch is considered to remain the same as long as no new
production has been added.
In this case factory production control has to be performed on samples taken from the constituted batch.
5

---------------------- Page: 7 ----------------------

SIST EN 14733:2005/kFprA1:2010
EN 14733:2005/FprA1:2010 (E)
2) The maximum amount of a given product which may be produced without testing of a production
sample. The frequency of testing may however not be less than one control every 200 tons or
monthly whilst producing, whichever is more frequent (if product is produced).
NOTE In the case of products, which are usually produced in small quantities, it is recommended to systematically
sample and test the first monthly production run.
In this case the taking and testing of a “batch contro
...