SIST EN 16140:2011
(Main)Natural stone test methods - Determination of sensitivity to changes in appearance produced by thermal cycles
Natural stone test methods - Determination of sensitivity to changes in appearance produced by thermal cycles
This European Standard specifies a method to assess possible alterations of natural stones (mainly visible sensitivity to oxidation processes) under the effect of sudden changes in temperature (thermal shock).
Prüfverfahren für Naturwerkstein - Bestimmung der Empfindlichkeit gegen Änderungen des äußeren Erscheinungsbildes durch thermische Zyklen
Diese Europäische Norm legt ein Verfahren zur Bewertung möglicher Verwitterungen von Natursteinen (vorwiegend sichtbare Empfindlichkeit auf Oxidationsprozesse) unter der Einwirkung plötzlicher Temperatur-wechsel (thermischer Schock) fest.
Méthodes d'essai pour pierres naturelles - Détermination de la sensibilité aux changements d'aspect induits par des cycles thermiques
La présente Norme européenne décrit une méthode permettant d’évaluer les modifications possibles des pierres naturelles (sensibilité aux procédés d’oxydation généralement visible) sous l’effet de changements brusques de température (choc thermique).
Preskušanje naravnega kamna - Ugotavljanje občutljivosti pri spremembi videza, nastalega pri termičnih ciklih
Ta evropski standard določa metodo za ocenjevanje morebitnih sprememb naravnega kamna (predvsem vidne občutljivosti za oksidacijske procese) pod vplivom nenadnih temperaturnih sprememb (toplotnega šoka).
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Prüfverfahren für Naturwerkstein - Bestimmung der Empfindlichkeit gegen Änderungen des äußeren Erscheinungsbildes durch thermische ZyklenMéthodes d'essai pour pierres naturelles - Détermination de la sensibilité aux changements d'aspect induits par des cycles thermiquesNatural stone test methods - Determination of sensitivity to changes in appearance produced by thermal cycles91.100.15Mineralni materiali in izdelkiMineral materials and productsICS:Ta slovenski standard je istoveten z:EN 16140:2011SIST EN 16140:2011en,fr,de01-november-2011SIST EN 16140:2011SLOVENSKI
STANDARD
SIST EN 16140:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16140
March 2011 ICS 91.100.15 English Version
Natural stone test methods - Determination of sensitivity to changes in appearance produced by thermal cycles
Méthodes d'essai pour pierres naturelles - Détermination de la sensibilité aux changements d'aspect induits par des cycles thermiques
Prüfverfahren für Naturwerkstein - Bestimmung der Empfindlichkeit gegen Änderungen des äußeren Erscheinungsbildes durch thermische Zyklen This European Standard was approved by CEN on 13 February 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16140:2011: ESIST EN 16140:2011
EN 16140:2011 (E) 2 Contents Page Foreword .31 Scope .52 Normative references .53 Symbols and abbreviations .54 Principle .55 Apparatus .56 Preparation of specimens .56.1 Sampling .56.2 Test specimens .56.2.1 Surface finish .56.2.2 Dimensions .57 Test procedure .67.1 Control measurements before cycling .67.2 Description of the cycles .67.3 Control measurements after cycling .68 Expression of results .69 Test report .7Annex A (informative)
Examples of evaluation codes for oxidations .9Annex B (informative)
Adapted thermal shock test . 11Bibliography . 12 SIST EN 16140:2011
EN 16140:2011 (E) 3 Foreword This document (EN 16140:2011) has been prepared by Technical Committee CEN/TC 246 “Natural stones”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2011, and conflicting national standards shall be withdrawn at the latest by September 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This draft standard is one of the series of draft standards for tests on natural stone. Test methods for natural stone consist of the following standards: EN 1925, Natural stone test methods Determination of water absorption coefficient by capillarity; EN 1926, Natural stone test methods Determination of uniaxial compressive strength; EN 1936, Natural stone test methods Determination of real density and apparent density, and of total and open porosity; EN 12370, Natural stone test methods Determination of resistance to salt crystallisation; EN 12371, Natural stone test methods Determination of frost resistance; EN 12372, Natural stone test methods Determination of flexural strength under concentrated load; EN 12407, Natural stone test methods Petrographic examination; EN 13161, Natural stone test methods Determination of flexural strength under constant moment; EN 13364, Natural stone test methods Determination of the breaking load at dowel hole; EN 13373, Natural stone test methods Determination of geometric characteristics on units; EN 13755, Natural stone test methods Determination of water absorption at atmospheric pressure; EN 13919, Natural stone test methods Determination of resistance to ageing by SO2 action in the presence of humidity; EN 14066, Natural stone test methods Determination of resistance to ageing by thermal shock; EN 14146, Natural stone test methods Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency); EN 14147, Natural stone test methods Determination of resistance to ageing by salt mist; EN 14157, Natural stone test methods Determination of the abrasion resistance; EN 14158, Natural stone test methods Determination of rupture energy; SIST EN 16140:2011
EN 16140:2011 (E) 4 EN 14205, Natural stone test methods Determination of Knoop hardness; EN 14231, Natural stone test methods Determination of the slip resistance by means of the pendulum tester; EN 14579, Natural stone test methods Determination of sound speed propagation; EN 14580, Natural stone test methods Determination of static elastic modulus; EN 14581, Natural stone test methods Deter
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.