SIST EN 61300-2-38:2007
(Main)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-38: Tests - Sealing for pressurized fibre optic closures
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-38: Tests - Sealing for pressurized fibre optic closures
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-38: Prüfungen - Dichtheit druckfester Muffen für Lichtwellenleiterbauteile
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures -- Partie 2-38: Essais - Etanchéité pour les boîtiers à fibres optiques à surpression interne
Cette partie de la CEI 61300, quand elle est exigée par la spécification applicable, décrit une méthode pour déterminer les performances d'étanchéité de boîtiers de fibres optiques, et du système d'étanchéité des boîtiers.
Optični spojni elementi in pasivne komponente – Osnovni preskuševalni in merilni postopki – 2-38. del: Preskušanje – Tesnjenje ohišij optičnih kablov, ki so pod tlakom (IEC 61300-2-38:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2007
1DGRPHãþD
SIST EN 61300-2-38:1999
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH±2VQRYQLSUHVNXãDOQLLQPHULOQL
SRVWRSNL±GHO3UHVNXãDQMH±7HVQMHQMHRKLãLMRSWLþQLKNDEORYNLVRSRG
WODNRP,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures -- Part 2-38: Tests - Sealing for pressurized fibre optic
closures (IEC 61300-2-38:2006)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-38: Prüfungen - Dichtheit druckfester Muffen für
Lichtwellenleiterbauteile (IEC 61300-2-38:2006)
Dispositifs d'interconnexion et composants passifs a fibres optiques - Méthodes
fondamentales d'essais et de mesures -- Partie 2-38: Essais - Etanchéité pour les
boîtiers a fibres optiques a surpression interne (IEC 61300-2-38:2006)
Ta slovenski standard je istoveten z: EN 61300-2-38:2006
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61300-2-38
NORME EUROPÉENNE
November 2006
EUROPÄISCHE NORM
ICS 33.180.20 Supersedes EN 61300-2-38:1997
English version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures
Part 2-38: Tests -
Sealing for pressurized fibre optic closures
(IEC 61300-2-38:2006)
Dispositifs d'interconnexion Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente
Méthodes fondamentales d'essais und passive Bauteile -
et de mesures Grundlegende Prüf- und Messverfahren
Partie 2-38: Essais - Teil 2-38: Prüfungen -
Etanchéité pour les boîtiers Dichtheit druckfester Muffen
à fibres optiques à surpression interne für Lichtwellenleiterbauteile
(CEI 61300-2-38:2006) (IEC 61300-2-38:2006)
This European Standard was approved by CENELEC on 2006-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-38:2006 E
Foreword
The text of document 86B/2346/FDIS, future edition 2 of IEC 61300-2-38, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-38 on 2006-10-01.
This European Standard supersedes EN 61300-2-38:1997.
Specific technical changes from EN 61300-2-38:1997 include the specifications of more strict and more
detailed sealing properties.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-2-38:2006 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61300-2-38:2006
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1) 2)
IEC 61300-1 - Fibre optic interconnecting devices and EN 61300-1 2003
passive components - Basic test and
measurement procedures
Part 1: General and guidance
1)
Undated reference.
2)
Valid edition at date of issue.
NORME CEI
INTERNATIONALE
IEC
61300-2-38
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2006-09
Dispositifs d’interconnexion et
composants passifs à fibres optiques –
Méthodes fondamentales d’essais et de mesures –
Partie 2-38:
Essais – Etanchéité pour les boîtiers à
fibres optiques à surpression interne
Fibre optic interconnecting
devices and passive components –
Basic test and measurement procedures –
Part 2-38:
Tests – Sealing for pressurized fibre optic closures
IEC 2006 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
G
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue
61300-2-38 IEC:2006 – 3 –
CONTENTS
FOREWORD.5
1 Scope.9
2 Normative references.9
3 General description.9
3.1 Test methods .9
3.2 Apparatus.9
4 Procedure.11
4.1 Method A.11
4.2 Method B.11
5 Severity .13
6 Details to be specified.13
61300-2-38 IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
_________
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –
Part 2-38: Tests – Sealing for pressurized fibre optic closures
FOREWORD
1) The International Elec
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.