SIST EN IEC 61300-2-38:2024
(Main)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for fibre optic sealed closures and hardened connectors using air pressure (IEC 61300-2-38:2023)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for fibre optic sealed closures and hardened connectors using air pressure (IEC 61300-2-38:2023)
This part of IEC 61300 presents two methods for testing the sealing performance of a fibre optic
sealed closure and hardened connector using air pressure.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-38: Prüfungen - Dichtheit druckfester Muffen für Lichtwellenleiterbauteile (IEC 61300-2-38:2023)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-38: Essais - Etanchéité pour les boîtiers à fibres optiques à surpression interne (IEC 61300-2-38:2023)
IEC 61300-2-38:2023 est disponible sous forme de IEC 61300-2-38:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L'IEC 61300-2-38:2023 décrit deux méthodes d’essai en vue de déterminer la performance d’étanchéité d'un boîtier scellé fibronique et d'un connecteur durci fibronique au moyen d’air comprimé. Cette troisième édition annule et remplace la deuxième édition parue en 2006. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) l’ajout de connecteurs durcis étanches;
b) les sévérités d’essai recommandées de l’IEC 61753-1;
c) les configurations d’essai des connecteurs durcis et des raccords durcis.
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 2-38. del: Preskusi - Tesnjenje ohišij optičnih kablov in utrjenih konektorjev, ki so pod tlakom (IEC 61300-2-38:2023)
Ta del standarda IEC 61300 predstavlja metodi za preskušanje tesnjenja ohišij optičnih kablov in utrjenih konektorjev, ki so pod tlakom.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61300-2-38:2024
01-februar-2024
Nadomešča:
SIST EN 61300-2-38:2007
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni
postopki - 2-38. del: Preskusi - Tesnjenje ohišij optičnih kablov in utrjenih
konektorjev, ki so pod tlakom (IEC 61300-2-38:2023)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-38: Tests - Sealing for fibre optic sealed closures and
hardened connectors using air pressure (IEC 61300-2-38:2023)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-38: Prüfungen - Dichtheit druckfester Muffen für
Lichtwellenleiterbauteile (IEC 61300-2-38:2023)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 2-38: Essais - Etanchéité pour les boîtiers
à fibres optiques à surpression interne (IEC 61300-2-38:2023)
Ta slovenski standard je istoveten z: EN IEC 61300-2-38:2023
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 61300-2-38:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61300-2-38:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 61300-2-38:2024
EUROPEAN STANDARD EN IEC 61300-2-38
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2023
ICS 33.180.20 Supersedes EN 61300-2-38:2006
English Version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures - Part 2-38: Tests -
Sealing for fibre optic sealed closures and hardened connectors
using air pressure
(IEC 61300-2-38:2023)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Procédures fondamentales d'essais et de Bauteile - Grundlegende Prüf- und Messverfahren -
mesures - Partie 2-38: Essais - Étanchéité des boîtiers Teil 2-38: Prüfungen - Dichtigkeitsprüfung druckfester
scellés fibroniques et des connecteurs durcis fibroniques au Muffen für Lichtwellenleiterbauteile mit Druckluft
moyen d'air comprimé (IEC 61300-2-38:2023)
(IEC 61300-2-38:2023)
This European Standard was approved by CENELEC on 2023-09-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61300-2-38:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61300-2-38:2024
EN IEC 61300-2-38:2023 (E)
European foreword
The text of document 86B/4768/FDIS, future edition 3 of IEC 61300-2-38, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61300-2-38:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-06-01
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-09-01
document have to be withdrawn
This document supersedes EN 61300-2-38:2006 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ nati
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.