SIST EN 301 163-1-1 V1.1.1:2003
(Main)Transmission and Multiplexing (TM); Generic requirements of Asynchronous Transfer Mode (ATM) transport functionality within equipment; Part 1-1: Functional characteristics and equipment performance
Transmission and Multiplexing (TM); Generic requirements of Asynchronous Transfer Mode (ATM) transport functionality within equipment; Part 1-1: Functional characteristics and equipment performance
Provide specifications for ATM equipment to be used in the ETSI region . Such specifications will ensure compatibility between equipment by identifying which functions are mandatory for interworking and which can be considered as truly optional.
Prenos in multipleksiranje (TM) – Generične zahteve prenosne funkcionalnosti asinhronega prenosnega načina (ATM) v sami opremi – 1-1. del: Funkcijske karakteristike in zmogljivost opreme
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.FLRQDOQRVWLNFLMVNHTransmission and Multiplexing (TM); Generic requirements of Asynchronous Transfer Mode (ATM) transport functionality within equipment; Part 1-1: Functional characteristics and equipment performance33.040.20Prenosni sistemTransmission systemsICS:Ta slovenski standard je istoveten z:EN 301 163-1-1 Version 1.1.1SIST EN 301 163-1-1 V1.1.1:2003en01-december-2003SIST EN 301 163-1-1 V1.1.1:2003SLOVENSKI
STANDARD
SIST EN 301 163-1-1 V1.1.1:2003
EN 301 163-1-1 V1.1.1 (1999-05)European Standard (Telecommunications series)Transmission and Multiplexing (TM);Generic requirements of Asynchronous Transfer Mode (ATM)transport functionality within equipment;Part 1-1: Functional characteristicsand equipment performanceSIST EN 301 163-1-1 V1.1.1:2003
ETSIEN 301 163-1-1 V1.1.1 (1999-05)2ReferenceDEN/TM-01016-1-1 (aro99ico.PDF)KeywordsATM, transport, B-ISDN, SDH, transmissionETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/88Internetsecretariat@etsi.frIndividual copies of this ETSI deliverablecan be downloaded fromhttp://www.etsi.orgIf you find errors in the present document, send yourcomment to: editor@etsi.frCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1999.All rights reserved.SIST EN 301 163-1-1 V1.1.1:2003
ETSIEN 301 163-1-1 V1.1.1 (1999-05)3ContentsIntellectual Property Rights.6Foreword.61Scope.72References.73Definitions and abbreviations.93.1Definitions.93.2Abbreviations.94Introduction.115Functional model and processes.125.1The ITU-T Recommendation I.732 functional model.125.1.1Allocation of process to ITU-T Recommendation I.732 functional blocks.135.2EN 301 163-2-1 formal model.185.2.1Symbols and diagrammatic conventions.185.2.2Functional modelling rationale.185.2.2.1Description of NEs - equipment functional specification.185.2.2.2Implementation independence.195.2.2.3Universal representation for management.195.2.3The underlying principles of functional modelling.195.2.3.1The client-server relationship.195.2.3.2Atomic functions and compound functions.205.2.3.3Network functions included in specific equipment.205.2.3.4The functional model and the information model.205.2.4Network layering principles.216Connectivity capabilities.216.1Introduction.216.2Number of connections supported.246.3Point-to-point connections.246.4Point-to-multipoint connections.256.4.1Overview.256.4.2Definitions.256.4.2.1ATM cell multicast.256.4.2.2Spatial multicast.256.4.2.3Logical multicast.256.5Multipoint to point connections.266.5.1Merging is different from multiplexing.266.5.2The Use of merging.266.5.2.1Identification of the information at higher layer(s).266.5.3Merging scheme.266.5.4Bypassing merging.276.6Multipoint to multipoint connections.286.7OAM aspects of multipoint connections.286.8Permanent Virtual Connections (PVC).286.8.1Hard PVCs.286.8.2Soft PVCs.286.9Switched virtual connections.296.10Support for different media upstream/downstream.297OAM functions.297.1OAM naming conventions for ATM.297.2OAM procedures.307.2.1AIS application.307.2.2RDI application.307.2.3CC application.30SIST EN 301 163-1-1 V1.1.1:2003
ETSIEN 301 163-1-1 V1.1.1 (1999-05)47.2.4LB application.307.2.5Performance Management application.308Traffic and congestion control functions.309Signalling.3110Resource control functions.3110.1ATM resource requests to be processed by an ATM equipment.3110.1.1Establishing or releasing a VP or VC connection.3110.1.2Modification of the traffic characteristics of an established VP or VC connection.3210.2General ATM equipment features for processing an ATM resource request.3210.2.1Processing of resource request messages.3210.2.2CAC function.3310.3Management, signalling, RM applications.3410.4Detailed description of the CAC function.3410.4.1SAC.3610.4.1.1SLAD.3610.4.1.1.1Description.3610.4.1.1.2Configuration of the SLAD.3710.4.1.2Routing function.3710.4.1.2.1Definitions.3710.4.1.2.2Input parameters of the routing process.3910.4.1.2.3Output parameters of the routing process.3910.4.1.2.4Configuration of the routing function.3910.4.2EAC function.3910.4.2.1Resource of an ATM equipment.3910.4.2.2EAC process.4010.4.2.3Configuration of the EAC function.4010.5Processing steps of an ATM resource request.4110.5.1Request to establish or release an ATM VP or VC connection.4110.5.2Request to modify the traffic characteristics of an existing ATM VP or VC connection.4110.6Method for reducing outages on resource modification.4211Traffic measurement functions.4211.1Traffic information collection.4211.1.1TP usage measurement.4211.1.2ATM cell level procedure performance information collection.4311.1.3VP/VC traffic load information collection.4311.1.4VP/VC UPC/NPC information collection.4311.1.5Call level information collection.4412NE performance.4412.1ATM layer cell transfer performance.4412.2Semi-permanent connection availability.4712.3Call processing performance.4713Availability and reliability.4913.1Availability objectives.4913.1.1General.4913.1.2Parameters.4913.1.3Derivation of MTBF values.5013.2Data integrity.5013.3Upgrade.5113.4Start-up requirements.5114Protections switching on ATM layer.5115EMF.5215.1Co-ordination between Layer Management functions.5215.2Reports to the EMF.5216Timing.5216.1User plane related timing.52SIST EN 301 163-1-1 V1.1.1:2003
ETSIEN 301 163-1-1 V1.1.1 (1999-05)516.1.1Timing accuracy.5216.1.2Equipment timing source.5216.1.3Timing of the TP layers.5216.2Management of plane related timing.5317General characteristics.5317.1Management interfaces.5317.2Power supply.5317.3Physical requirements.5317.4Environmental requirements.5317.5Electrical/Optical safety requirements.5317.6Equipment practice.5318Application requirements.54Annex A (informative):AIS application.55A.1AIS application.55A.1.1AIS definition.55A.1.2AIS flow.55A.1.3AIS generation control.57Bibliography.60History.61SIST EN 301 163-1-1 V1.1.1:2003
ETSIEN 301 163-1-1 V1.1.1 (1999-05)6Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respectof ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on theETSI Web server (http://www.etsi.org/ipr).Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guaranteecan be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Technical Committee Transmissionand Multiplexing (TM).The present document is part 1 of a multi-part EN covering the generic requirements of Asynchronous Transfer Mode(ATM) transport functionality within equipment, as identified below:Part 1:"Functional characteristics and equipment performance";Part 2:"Functional model for the transfer and layer management plane".National transposition datesDate of adoption of this EN:23 April 1999Date of latest announcement of this EN (doa):31 July 1999Date of latest publication of new National Standardor endorsement of this EN (dop/e):31 January 2000Date of withdrawal of any conflicting National Standard (dow):31 January 2000SIST EN 301 163-1-1 V1.1.1:2003
ETSIEN 301 163-1-1 V1.1.1 (1999-05)71ScopeThe purpose of the present document is to provide specifications for ATM equipment to be used in the ETSI region.These specifications seek to define the processes associated with ATM rather than specific equipment types. Suchspecifications will ensure compatibility between equipment by identifying which functions within a process aremandatory for interworking and which can be considered as truly optional. It is not the intention to preventmanufacturers or procurers from following an alternative specification, but the consequences should become clear fromthe present document.The ETSI ATM Equipment specification will be in two parts. The first part (the present document) being moreconceptual, producing a list of functions and processes and some guidance to the ITU model and the ETSI functionalmodel. The second part (EN 301 163-2-1 [18]) is a formal representation of transfer and layer management functions inthe form of a library of atomic functions. This will provide flexibility since many equipment types may be defined byusing these atomic functions in different combinations.The specification will take advantage of the work done in ITU but will take the work further with an ETSI view. Thismeans: the identification of ITU options that has to be mandatory in the ETSI region, deletion of options not requiredfor the ETSI region, creation of new or revised descriptions where necessary, identification of guideline or benchmarkperformance parameters for classes of equipment.2ReferencesThe following documents contain provisions which, through reference in this text, constitute provisions of the presentdocument.· References are either specific (identified by date of publication, edition number, version number, etc.) ornon-specific.· For a specific reference, subsequent revisions do not apply.· For a non-specific reference, the latest version applies.· A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber.[1]ATMF TM v4.0: "Integrated Local Management Interface (ILMI) Specification v4.0".[2]ETS 300 019-1-0: "Equipment Engineering (EE); Environmental conditions and environmentaltests for telecommunications equipment; Part 1-0: Classification of environmental conditions;Introduction".[3]ETS 300 119-1: "Equipment Engineering (EE); European telecommunication standard forequipment practice; Part 1: Introduction and terminology".[4]ETS 300 132-1: "Equipment Engineering (EE); Power supply interface at the input totelecommunications equipment; Part 1: Operated by alternating current (ac) derived from directcurrent (dc) sources".[5]ETS 300 132-2: "Equipment Engineering (EE); Power supply interface at the input totelecommunications equipment; Part 2: Operated by direct current (dc)".[6]ETS 300 150: "Transmission and Multiplexing (TM); Protocol suites for Q interfaces formanagement of transmission systems".[7]ETS 300 253: "Equipment Engineering (EE); Earthing and bonding of telecommunicationequipment in telecommunication centres".[8]ETS 300 301: "Broadband Integrated Services Digital Network (B-ISDN); Traffic control andcongestion control in B-ISDN".SIST EN 301 163-1-1 V1.1.1:2003
ETSIEN 301 163-1-1 V1.1.1 (1999-05)8[9]ETS 300 304: "Transmission and Multiplexing (TM); Synchronous Digital Hierarchy (SDH); SDHinformation model for the Network Element (NE) view".[10]ETS 300 386-1: "Equipment Engineering (EE); Telecommunication network equipment; Electro-Magnetic Compatibility (EMC) requirements; Part 1: Product family overview, compliance criteriaand test levels".[11]EN 300 386-2: "Electromagnetic compatibility and Radio spectrum Matters (ERM);Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements;Part 2: Product family standard".[12]ETS 300 404: "Broadband Integrated Services Digital Network (B-ISDN); B-ISDN Operation AndMaintenance (OAM) principles and functions".[13]EN 300 417: "Transmission and Multiplexing (TM)".[14]EN 300 417-1-1: "Transmission and Multiplexing (TM); Generic functional requirements forSynchronous Digital Hierarchy (SDH) equipment; Part 1–1: Generic processes and performance".[15]EN 300 417-6-1: "Transmission and Multiplexing (TM); Generic requirements of transportfunctionality of equipment; Part 6–1: Synchronous layer functions".[16]EN 300 462-1: "Transmission and Multiplexing (TM); Generic requirements for synchronizationnetworks; Part 1: Definitions and terminology for synchronization networks".[17]ETS 300 469: "Broadband Integrated Services Digital Network (B-ISDN); Asynchronous TransferMode (ATM); Management of the network element view [ITU–T Recommendation I.751(1996)]".[18]EN 301 163–2–1: "Transmission and Multiplexing (TM); Generic requirements of AsynchronousTransfer Mode (ATM) transport functionality within equipment; Part 2–1: Functional model forthe transfer and layer management plane".[19]ITU-T handbook: "Handbook on Quality of Service and Network Performance".[20]ITU-T Recommendation E.862: "Dependability planning of telecommunication networks".[21]ITU Recommendation I.150: "B-ISDN asynchronous transfer mode functional characteristics".[22]ITU-T Recommendation I.321: "B-ISDN protocol reference model and its application".[23]ITU-T Recommendation I.326: "Functional architecture of transport networks based on ATM".[24]ITU-T Recommendation I.353: "Reference events for defining ISDN and B-ISDN performanceparameters".[25]ITU-T Recommendation I.356: "B-ISDN ATM layer cell transfer performance".[26]ITU-T Recommendation I.357: "B-ISDN semi-permanent connection availability".[27]ITU-T Recommendation I.358: "Call processing performance for switched Virtual ChannelConnections (VCCs) in B-ISDN".[28]ITU-T Recommendation I.371: "Traffic control and congestion control in B-ISDN".[29]ITU-T Recommendation I.432: "B-ISDN user-network interface - Physical layer specification".[30]ITU-T Recommendation I.432.1: "B-ISDN user-network interface - Physical layer specification:General characteristics".[31]ITU-T Recommendation I.610: "B-ISDN operation and maintenance principles and functions".[32]ITU-T Recommendation I.731: "Types and general characteristics of ATM equipment".[33]ITU-T Recommendation I.732: "Functional characteristics of ATM equipment".SIST EN 301 163-1-1 V1.1.1:2003
ETSIEN 301 163-1-1 V1.1.1 (1999-05)9[34]ITU-T Recommendation G.803: "Architecture of transport networks based on the synchronousdigital hierarchy (SDH)".[35]ITU-T Recommendation G.805: "Generic functional architecture of transport networks".[36]ITU-T Recommendation G.911: "Parameters and calculation methodologies for reliability andavailability of fibre optic systems".[37]ITU-T Recommendation O.191: "Equipment to assess ATM layer cell transfer performance".[38]ITU-T Recommendation Q.2100: "B-ISDN signalling ATM adaptation layer (SAAL) overviewdescription".[39]ITU-T Recommendation X.721: "Information technology - Open Systems Interconnection -Structure of management information: definition of management information".[40]IEC 825-2: "Safety of laser products - Part 2: Safety of optical fibre communications systems".3Definitions an
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.