SIST EN ISO 10545-4:2014

Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2014)

EN ISO 10545-4 specifies a test method for determining the modulus of rupture and breaking strength of all ceramic tiles.

Keramische Fliesen und Platten - Teil 4: Bestimmung der Biegefestigkeit und der Bruchlast (ISO 10545-4:2014)

Dieser Teil von ISO 10545 legt ein Prüfverfahren zur Bestimmung der Biegefestigkeit und der Bruchlast für alle keramischen Fliesen und Platten fest.
ANMERKUNG  ISO 13006 enthält Anforderungen an die Eigenschaften von Fliesen und Platten und weitere nützliche Angaben zu diesen Produkten.

Carreaux et dalles céramiques - Partie 4: Détermination de la résistance à la flexion et de la force de rupture (ISO 10545-4:2014)

ISO 10545:2014 spécifie une méthode d'essai pour la détermination de la résistance à la flexion et la force de rupture pour tous les carreaux et dalles céramiques.
NOTE L'ISO 13006 spécifie les exigences relatives aux propriétés des carreaux et dalles, et fournit d'autres informations utiles sur ces produits.

Keramične ploščice - 4. del: Ugotavljanje sile pri zlomu in upogibne trdnosti (ISO 10545-4:2014)

Standard EN ISO 10545-4 določa preskusno metodo za ugotavljanje sile pri zlomu in upogibne trdnosti vseh keramičnih ploščic.

General Information

• Status: Withdrawn
• Public Enquiry End Date: 05-May-2014
• Publication Date: 02-Sep-2014
• Withdrawal Date: 28-May-2019
• ICS: 91.100.23 - Ceramic tiles
• Technical Committee: IKER - Ceramics
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 28-May-2019
• Due Date: 20-Jun-2019
• Completion Date: 29-May-2019
• Directive: 89/106/EEC - Construction products
• Ref Project: EN ISO 10545-4:2014 - Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2014)

Relations

• Replaced By: SIST EN ISO 10545-4:2019 - Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2019)
• Effective Date: 01-Jul-2019
• Replaces: SIST EN ISO 10545-4:2012 - Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2004)
• Effective Date: 01-Oct-2014
• Replaces: SIST EN ISO 10545-4:2012 - Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2004)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10545-4:2014
01-oktober-2014
1DGRPHãþD
SIST EN ISO 10545-4:2012
.HUDPLþQHSORãþLFHGHO8JRWDYOMDQMHVLOHSUL]ORPXLQXSRJLEQHWUGQRVWL,62

Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO
10545-4:2014)
Keramische Fliesen und Platten - Teil 4: Bestimmung der Biegefestigkeit und der
Bruchlast (ISO 10545-4:2014)
Carreaux et dalles céramiques - Partie 4: Détermination de la résistance à la flexion et
de la force de rupture (ISO 10545-4:2014)
Ta slovenski standard je istoveten z: EN ISO 10545-4:2014
ICS:
91.100.23 .HUDPLþQHSORãþLFH Ceramic tiles
SIST EN ISO 10545-4:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10545-4:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 10545-4:2014

EUROPEAN STANDARD
EN ISO 10545-4

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2014
ICS 91.100.23 Supersedes EN ISO 10545-4:2012
English Version
Ceramic tiles - Part 4: Determination of modulus of rupture and
breaking strength (ISO 10545-4:2014)
Carreaux et dalles céramiques - Partie 4: Détermination de Keramische Fliesen und Platten - Teil 4: Bestimmung der
la résistance à la flexion et de la force de rupture (ISO Biegefestigkeit und der Bruchlast (ISO 10545-4:2014)
10545-4:2014)
This European Standard was approved by CEN on 7 June 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10545-4:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10545-4:2014
EN ISO 10545-4:2014 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 10545-4:2014
EN ISO 10545-4:2014 (E)
Foreword
This document (EN ISO 10545-4:2014) has been prepared by Technical Committee ISO/TC 189 “Ceramic
tile” in collaboration with Technical Committee CEN/TC 67 “Ceramic tiles” the secretariat of which is held by
UNI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2015, and conflicting national standards shall be withdrawn at
the latest by January 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10545-4:2012.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10545-4:2014 has been approved by CEN as EN ISO 10545-4:2014 without any modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 10545-4:2014

---------------------- Page: 6 ----------------------

SIST EN ISO 10545-4:2014
INTERNATIONAL ISO
STANDARD 10545-4
Third edition
2014-07-15
Ceramic tiles —
Part 4:
Determination of modulus of rupture
and breaking strength
Carreaux et dalles céramiques —
Partie 4: Détermination de la résistance à la flexion et de la force de
rupture
Reference number
ISO 10545-4:2014(E)
©
ISO 2014

---------------------- Page: 7 ----------------------

SIST EN ISO 10545-4:2014
ISO 10545-4:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 10545-4:2014
ISO 10545-4:2014(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Test specimens. 2
7 Procedure. 3
8 Calculation . 3
9 Test report . 4
© ISO 2014 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 10545-4:2014
ISO 10545-4:2014(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
...