SIST EN ISO 21545:2021
(Main)Paints and varnishes - Determination of settling (ISO 21545:2018)
Paints and varnishes - Determination of settling (ISO 21545:2018)
This document specifies a method for determining the settling of coating materials. It is used to determine short-time settling, e.g. during transport or in an electro-deposition bath.
Beschichtungsstoffe - Bestimmung des Absetzverhaltens (ISO 21545:2018)
Dieses Dokument legt ein Verfahren zum Bestimmen des Absetzverhaltens von Beschichtungsstoffen fest. Es wird angewendet, um das Absetzen innerhalb einer kurzen Zeitspanne, z. B. während des Transports oder in einem Elektrotauchbad, zu bestimmen.
Peintures et vernis - Détermination de la sédimentation (ISO 21545:2018)
Le présent document spécifie une méthode de détermination de la sédimentation des matériaux de peinture. Elle est utilisée pour déterminer la sédimentation à court terme, par exemple pendant le transport ou dans un bain d'électrodéposition.
Barve in laki - Določanje usedanja (ISO 21545:2018)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 21545:2021
01-marec-2021
Barve in laki - Določanje usedanja (ISO 21545:2018)
Paints and varnishes - Determination of settling (ISO 21545:2018)
Beschichtungsstoffe - Bestimmung des Absetzverhaltens (ISO 21545:2018)
Peintures et vernis - Détermination de la sédimentation (ISO 21545:2018)
Ta slovenski standard je istoveten z: EN ISO 21545:2020
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 21545:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 21545:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 21545:2021
EN ISO 21545
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2020
EUROPÄISCHE NORM
ICS 87.040
English Version
Paints and varnishes - Determination of settling (ISO
21545:2018)
Peintures et vernis - Détermination de la Beschichtungsstoffe - Bestimmung des
sédimentation (ISO 21545:2018) Absetzverhaltens (ISO 21545:2018)
This European Standard was approved by CEN on 30 November 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 21545:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 21545:2021
EN ISO 21545:2020 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 21545:2021
EN ISO 21545:2020 (E)
European foreword
The text of ISO 21545:2018 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 21545:2020 by Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2021, and conflicting national standards shall be
withdrawn at the latest by June 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 21545:2018 has been approved by CEN as EN ISO 21545:2020 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 21545:2021
---------------------- Page: 6 ----------------------
SIST EN ISO 21545:2021
INTERNATIONAL ISO
STANDARD 21545
First edition
2018-08
Paints and varnishes — Determination
of settling
Peintures et vernis — Détermination de la sédimentation
Reference number
ISO 21545:2018(E)
©
ISO 2018
---------------------- Page: 7 ----------------------
SIST EN ISO 21545:2021
ISO 21545:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 21545:2021
ISO 21545:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Sampling and preparation of samples . 2
7 Procedure. 2
7.1 Test temperature . 2
7.2 Measuring cylinder . 2
7.3 Test
...
SLOVENSKI STANDARD
oSIST prEN ISO 21545:2020
01-september-2020
Barve in laki - Določevanje usedanja (ISO 21545:2018)
Paints and varnishes - Determination of settling (ISO 21545:2018)
Beschichtungsstoffe - Bestimmung des Absetzverhaltens (ISO 21545:2018)
Peintures et vernis - Détermination de la sédimentation (ISO 21545:2018)
Ta slovenski standard je istoveten z: prEN ISO 21545
ICS:
87.040 Barve in laki Paints and varnishes
oSIST prEN ISO 21545:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 21545:2020
---------------------- Page: 2 ----------------------
oSIST prEN ISO 21545:2020
INTERNATIONAL ISO
STANDARD 21545
First edition
2018-08
Paints and varnishes — Determination
of settling
Peintures et vernis — Détermination de la sédimentation
Reference number
ISO 21545:2018(E)
©
ISO 2018
---------------------- Page: 3 ----------------------
oSIST prEN ISO 21545:2020
ISO 21545:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 21545:2020
ISO 21545:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Sampling and preparation of samples . 2
7 Procedure. 2
7.1 Test temperature . 2
7.2 Measuring cylinder . 2
7.3 Test procedure . 2
8 Precision . 2
9 Test report . 2
Bibliography . 3
© ISO 2018 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 21545:2020
ISO 21545:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
differe
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.