iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 583-3:1999

(Main)

Non-destructive testing - Ultrasonic examination - Part 3: Transmission technique

Non-destructive testing - Ultrasonic examination - Part 3: Transmission technique

This part of the standard specifies the principles of transmission techniques.  Transmission techniques can be used for:   - detection of imperfections;  - determination of attenuation.  The general principles required for the use of ultrasonic examination of industrial products are described in part 1 of this standard.  The transmission technique is used for examination of flat products, e.g. plates and sheets.  Further, it is used for examinations e.g.:   - where the shape, dimensions or orientation of possible imperfections are unfavourable for direct reflection;  - in materials with high attenuation;  - in thin products.

Zerstörungsfreie Prüfung - Ultraschallprüfung - Teil 3: Durchschallungstechnik

Dieser Teil der Norm legt die Grundlagen der Durchschallungstechniken fest. Durchschallungstechniken können angewendet werden: - zum Nachweis von Unregelmäßigkeiten; - zur Bestimmung der Schallschwächung. Die allgemeine Grundlagen, die zur Awendung der Ultraschallprüfung an Industrieerzeugnissen erforderlich sind, sind in Teil 1 dieser Norm aufgeführt. Die Durchshcallungs- technik wird zur Prüfung von Platten und Blechen verwendet.

Essais non destructifs - Contrôle ultrasonore - Partie 3: Technique par transmission

La présente partie de la norme spécifie les principes des techniques de transmission. Les contrôles par transmission peuvent etre utilisés pour: - la détection des discontinuités; - la détermination de l'atténuation. Les principes généraux s'appliquant au contrôle par ultrasons de produits industriels figurent dans la partie 1 de la présente norme. Le contrôle par transmission est utilisé principalement pour le contrôle des plaques et tôles.

Neporušitveno preskušanje - Ultrazvočne preiskave - 3. del: Tehnika prezvočenja

General Information

Status
Withdrawn
Publication Date
31-May-1999
Withdrawal Date
29-May-2014
ICS
19.100 - Non-destructive testing
Technical Committee
PKG - Testing of metallic materials
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
29-May-2014
Due Date
21-Jun-2014
Completion Date
30-May-2014
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
EN 583-3:1997 - Non-destructive testing - Ultrasonic examination - Part 3: Transmission technique

Relations

Replaced By
SIST EN ISO 16823:2014 - Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012)
Effective Date
01-Jul-2014

Buy Standard

EN 583-3:1999EN 583-3:1999
PreviousNext
Standard + National Annex and/or Foreword
EN 583-3:1999
Foreword and/or annex in Slovenian language, body of the standard in English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 583-3
prva izdaja
STANDARD
junij 1999













Neporušitvene preiskave - Ultrazvočne preiskave - 3. del: Tehnika

prezvočenja (prevzet EN 583-3:1997 z metodo platnice)


Non destructive testing - Ultrasonic examination - Part 3: Transmission technique


Essais non destructifs - Contrôle ultrasonore - Partie 3: Technique par
transmission

Zerstörungsfreie Prüfung - Ultraschallprüfung - Teil 3: Durchschallungstechnik













Deskriptorji: neporušitvene preiskave, ultrazvočne frekvence, ultrazvočni preskusi,
prezvočenje, splošni podatki, metoda pregleda, metoda merjenja, primerjalna
analiza

Referenčna številka
ICS 19.100 SIST EN 583-3:1999 (en)


Nadaljevanje na straneh od II do III in 1 do 12




© Standard je založil in izdal Urad Republike Slovenije za standardizacijo in meroslovje pri Ministrstvu za znanost in tehnologijo.
Razmnoževanje ali kopiranje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 583-3:1999
SIST EN 583-3 : 1999
NACIONALNI UVOD
Standard SIST EN 583-3, Neporušitvene preiskave - Ultrazvočne preiskave - 3. del: Tehnika
prezvočenja, prva izdaja, 1999, ima status slovenskega standarda in je z metodo platnice prevzet
evropski standard EN 583-3, Non destructive testing - Ultrasonic examination - Part 3: Transmission
technique, 1997-05, v angleškem jeziku.
NACIONALNI PREDGOVOR
Evropski standard EN 583-3:1997 je pripravil tehnični odbor Evropske organizacije za standardizacijo
CEN/TC 138 Neporušitvene preiskave.
Odločitev za prevzem tega standarda po metodi platnice je dne 1999-04-15 sprejel tehnični odbor
USM/TC PKG Preskušanje kovinskih gradiv.
Ta slovenski standard je dne 1999-05-04 odobril direktor USM.
OPOMBI
- Povsod, kjer se v besedilu standarda uporablja izraz “evropski standard”,
v SIST EN 583-3:1999 to pomeni “slovenski standard”.
- Nacionalni uvod in nacionalni predgovor nista sestavni del standarda.
II

---------------------- Page: 2 ----------------------

SIST EN 583-3:1999
SIST EN 583-3 : 1999
VSEBINA Stran
Predgovor .3
1 Področje uporabe .4
2 Zveze s standardi .4
3 Definicije .4
4 Principi preiskave .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 7963:2023(Main)
Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022)
EN ISO 7963:2022

This document specifies the requirements for the dimensions, material, manufacture and methods of
use for calibration block No. 2 for setting and checking ultrasonic test equipment.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18563-1:2022(Main)
Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments (ISO 18563-1:2022)
EN ISO 18563-1:2022

This document specifies the functional characteristics of multi-channel ultrasonic phased array
instruments used for array probes and provides methods for their measurement and verification.
This document is also applicable to ultrasonic phased array instruments in automated systems; but
other tests can be needed to ensure satisfactory performance. When the phased array instrument is a
part of an automated system, the acceptance criteria can be modified by agreement between the parties
involved.
This document also can partly be applicable to FMC instruments and TFM instruments.
This document gives the extent of the verification and defines acceptance criteria within a frequency
range of 0,5 MHz to 10 MHz.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17501:2022(Main)
Non-destructive testing - Thermographic testing - Active thermography with laser excitation
EN 17501:2022

This document determines the guidelines and the specifications for non-destructive testing using active thermography with laser excitation.
Active thermography with laser excitation is mainly applicable, but not limited to different materials (e.g. composites, metals, ceramics) and to:
-   the detection of surface-breaking discontinuities, particularly cracks;
-   the detection of discontinuities located just below the surface or below coatings with an efficiency that diminishes rapidly with a few mm depth;
-   the detection of disbonds and delamination parallel to the examined surface;
-   the measurement of thermal material properties, like thermal diffusivity;
-   the measurement of coating thickness.
The requirements for the equipment, for the verification of the system, for the surface condition of the part to be tested, for the scanning conditions, for the recording, the processing and the interpretation of the results are specified. Acceptance criteria are not defined.
Active thermography with laser excitation can be applied in industrial production as well as in maintenance and repair (vehicle parts, engine parts, power plant, aerospace, etc.).

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17391:2022(Main)
Non-destructive testing - Acoustic emission testing - Inservice acoustic emission monitoring of metallic pressure equipment and structures - General requirements
EN 17391:2022

This standard describes acoustic emission (AE) monitoring for in service detection, location and grading of AE sources with application to metallic pressure equipment and structures. The monitoring can be periodic, temporary or continuous, on site or remote controlled, supervised or automated. The objectives of AE monitoring are to define regions which are acoustically active as a result of damage or defect evolution.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9712:2022(Main)
Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2022)
EN ISO 9712:2022

This document specifies requirements for the qualification and certification of personnel who perform
industrial non-destructive testing (NDT) in the following methods.
a) acoustic emission testing;
b) eddy current testing;
c) leak testing (hydraulic pressure tests excluded);
d) magnetic testing;
e) penetrant testing;
f) radiographic testing;
g) strain gauge testing;
h) thermographic testing;
i) ultrasonic testing;
j) visual testing (direct unaided visual tests and visual tests carried out during the application of
another NDT method are excluded).
The system specified in this document is also applicable to other NDT methods or to NDT techniques
within an established NDT method, provided a comprehensive scheme of certification exists and
the NDT method or NDT technique is covered by international, regional or national standards or the
NDT method or the NDT technique has been demonstrated to be effective to the satisfaction of the
certification body.
NOTE 1 The term "industrial" implies the exclusion of applications in the field of medicine.
NOTE 2 CEN/TR 14748 provides guidance on the methodology for qualification of non-destructive tests.
NOTE 3 This document specifies requirements for what are, in effect, third party conformity assessment
schemes. These requirements do not directly apply to conformity assessment by second or first parties, but
relevant parts of this document can be referred to in such arrangements.
NOTE 4 The term “direct unaided visual testing” implies where there is an uninterrupted optical path from
the observer’s eye to the test area and the observer uses no tools or devices (e.g. mirror, endoscope, fibre optic).
NOTE 5 Calculations of strain based on other NDT methods are excluded.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17290:2021(Main)
Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
EN 17290:2021

This document specifies the application of the time-of-flight diffraction (TOFD) technique in testing of metals for quantifying loss of thickness due to erosion and/or corrosion.
This document applies to all types of corrosion or erosion damage, particularly those defined in ISO 16809.
This test applies to unalloyed or low-alloyed steel materials.
It applies to components with a nominal thickness ≥ 6 mm. For smaller thicknesses feasibility tests will be performed to validate the technique.
For other materials, feasibility tests are essential too.
The TOFD technique can be used here as a stand-alone technique or in combination with other non-destructive testing techniques, during manufacturing and for testing in-service, in order to detect material loss caused by erosion and/or corrosion.
This technique is based on analysis of TOFD images established using reflected and/or diffracted ultrasonic signals.
This document does not specify acceptance levels.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13477-2:2021(Main)
Non-destructive testing - Acoustic emission testing - Equipment characterisation - Part 2: Verification of operating characteristics
EN 13477-2:2021

This document specifies methods for routine verification of the performance of acoustic emission (AE) equipment comprising one or more sensing channels. It is intended for use by operators of the equipment under laboratory conditions. Verification of the measurement characteristics is advised after purchase of equipment, in order to obtain reference data for later verifications. Verification is also advised after repair, modifications, use under extraordinary conditions, or if one suspects a malfunction. The procedures described in this document do not exclude other qualified methods, e.g. verification in the frequency domain. These procedures apply in general unless the manufacturer specifies alternative equivalent procedures. Safety aspects of equipment for use in potentially explosive zones are not considered in this document.

  • Standard
    79 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3452-1:2021(Main)
Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2021)
EN ISO 3452-1:2021

This standard defines a method of penetrant testing used to detect discontinuities, e.g. cracks, laps, folds, porosity and lack of fusion, which are open to the surface of the material to be tested. It is mainly applied to metallic materials, but can also be performed on other materials, provided that they are inert to the test media and they are not excessively porous, examples of which are castings, forgings, welds, ceramics, etc.
This standard is not intended to be used for acceptance criteria and gives no information relating to the suitability of individual test systems for specific applications nor requirements for test equipment.
The term 'discontinuity' is used here in the sense that no evaluation concerning acceptability or non-acceptability is included.
Methods for determining and monitoring the essential properties of penetrant testing products to be used are specified in ISO 3452-2 and ISO 3452-3.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3452-2:2021(Main)
Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2021)
EN ISO 3452-2:2021

This part of ISO 3452 specifies the technical requirements and test procedures for penetrant materials for their type testing and batch testing. It also details on-site control tests and methods.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12543-2:2021(Main)
Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
EN 12543-2:2021

This document specifies a method for the measurement of effective focal spot dimensions above 0,1 mm of X-ray systems up to and including 1000 kV tube voltage by means of the pinhole camera method with digital evaluation. The tube voltage applied for this measurement is restricted to 200 kV for visual film evaluation.
The imaging quality and the resolution of X-ray images depend highly on the characteristics of the effective focal spot, in particular the size and the two dimensional intensity distribution as seen from the detector plane.
This test method provides instructions for determining the effective size (dimensions) of standard (macro focal spots) and mini focal spots of industrial X-ray tubes. This determination is based on the measurement of an image of a focal spot that has been radiographically recorded with a "pinhole" technique and evaluated with a digital method.
For the characterization of commercial X-ray tube types (i.e. for advertising or trade) it is advised that the specific FS values of Annex A are used.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day