SIST EN ISO 16823:2014
(Main)Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012)
Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012)
EN ISO 16823 specifies the principles of transmission techniques. Transmission techniques can be used for: - detection of imperfections; - determination of attenuation. The general principles required for the use of ultrasonic examination of industrial products are described inISO 16810. The transmission technique is used for examination of flat products, e.g. plates and sheets. Further, it is used for examinations e.g.: - where the shape, dimensions or orientation of possible imperfections are unfavourable for direct reflection; - in materials with high attenuation; - in thin products.
Zerstörungsfreie Prüfung - Ultraschallprüfung - Durchschallungstechnik (ISO 16823:2012)
Diese Internationale Norm legt die Grundlagen der Durchschallungstechnik fest.
Die Durchschallungstechnik kann angewendet werden:
zum Nachweis von Unregelmäßigkeiten;
zur Bestimmung der Schallschwächung.
Die allgemeinen Grundlagen, die zur Anwendung der Ultraschallprüfung an Industrieerzeugnissen erforderlich sind, sind in ISO 16810 aufgeführt.
Die Durchschallungstechnik wird zur Prüfung von Flacherzeugnissen, z. B. Blechen, verwendet.
Weiterhin wird sie z. B. bei Prüfungen verwendet:
bei denen Gestalt, Abmessungen oder Orientierung möglicher Unregelmäßigkeiten für eine direkte Reflexion ungünstig sind;
bei Werkstoffen mit hoher Schallschwächung;
bei dünnen Erzeugnissen.
Essais non destructifs - Contrôle par ultrasons - Technique par transmission (ISO 16823:2012)
L'ISO 16823:2012 spécifie les principes des techniques de transmission.
Les techniques de transmission peuvent être utilisées pour la détection de discontinuités et la détermination de l'atténuation.
Les principes généraux exigés pour l'utilisation du contrôle par ultrasons de produits industriels sont décrits dans l'ISO 16810.
La technique par transmission est utilisée pour le contrôle de produits plats, par exemple plaques et tôles.
Elle est également utilisée pour l'examen d'éventuelles discontinuités dont la forme, les dimensions ou l'orientation sont défavorables au contrôle par réflexion, de matériaux à atténuation élevée et de produits minces.
Neporušitvene preiskave - Ultrazvočne preiskave - Prehodna metoda (ISO 16823:2012)
Standard EN ISO 16823 določa načela prehodnih metod. Prehodne metode se lahko uporabljajo za: - zaznavanje nepravilnosti; - določevanje stopnje krčenja. Osnovna načela za uporabo ultrazvočnih preiskav industrijskih izdelkov so opisana v standardu ISO 16810. Prehodna metoda se uporablja za pregled ploskih izdelkov, npr. plošč in trakov. Poleg tega se uporablja za pregled v primerih, ko: - so oblika, velikost ali položaj možnih nepravilnosti neprimerni za direktni odboj; - pri materialih, ki se močno krčijo; - pri tankih izdelkih.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 16823:2014
01-julij-2014
1DGRPHãþD
SIST EN 583-3:1999
1HSRUXãLWYHQHSUHLVNDYH8OWUD]YRþQHSUHLVNDYH3UHKRGQDPHWRGD ,62
Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012)
Zerstörungsfreie Prüfung - Ultraschallprüfung - Durchschallungstechnik (ISO
16823:2012)
Essais non destructifs - Contrôle par ultrasons - Technique par transmission (ISO
16823:2012)
Ta slovenski standard je istoveten z: EN ISO 16823:2014
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
SIST EN ISO 16823:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 16823:2014
---------------------- Page: 2 ----------------------
SIST EN ISO 16823:2014
EUROPEAN STANDARD
EN ISO 16823
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2014
ICS 19.100 Supersedes EN 583-3:1997
English Version
Non-destructive testing - Ultrasonic testing - Transmission
technique (ISO 16823:2012)
Essais non destructifs - Contrôle par ultrasons - Technique Zerstörungsfreie Prüfung - Ultraschallprüfung -
par transmission (ISO 16823:2012) Durchschallungstechnik (ISO 16823:2012)
This European Standard was approved by CEN on 9 February 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16823:2014 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 16823:2014
EN ISO 16823:2014 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 16823:2014
EN ISO 16823:2014 (E)
Foreword
The text of ISO 16823:2012 has been prepared by Technical Committee ISO/TC 135 “Non-destructive testing”
of the International Organization for Standardization (ISO) and has been taken over as EN ISO 16823:2014 by
Technical Committee CEN/TC 138 “Non-destructive testing” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2014, and conflicting national standards shall be
withdrawn at the latest by September 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 583-3:1997.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 16823:2012 has been approved by CEN as EN ISO 16823:2014 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 16823:2014
---------------------- Page: 6 ----------------------
SIST EN ISO 16823:2014
INTERNATIONAL ISO
STANDARD 16823
First edition
2012-04-01
Non-destructive testing — Ultrasonic
testing — Transmission technique
Essais non destructifs — Contrôle par ultrasons — Technique par
transmission
Reference number
ISO 16823:2012(E)
©
ISO 2012
---------------------- Page: 7 ----------------------
SIST EN ISO 16823:2014
ISO 16823:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 16823:2014
ISO 16823:2012(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope.1
2 Normative references.1
3 Terms and definitions .1
4 Principles of the examination .1
4.1 Basic techniques and set-up.1
4.2 Capability of detection of imperfections.3
4.3 Requirements for geometry and access.4
4.4 Effects of variations in coupling, angulation and alignment of probe .4
5 Examination technique.4
5.1 General.4
5.2 Sensitivity setting.4
5.3 Scanning.4
5.4 Evaluation of imperfections .4
5.5 Determination of attenuation coefficient .5
© ISO 2012 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 16823:2014
ISO 16823:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 16823 was prepared by Technical Committee ISO/TC 135, Non-destructive testing, Subcommittee SC 3,
Ultrasonic testing.
iv © ISO 2012 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 16823:2014
ISO 16823:2012(E)
Introduction
This International Standard is based on EN 583-3:1997, Non-destructive testing — Ultrasonic examination —
Part 3: Transmission technique.
The following International Standards are linked.
ISO 16810, Non-destructive testing — Ultrasonic testing — General principles
ISO 16811, Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
ISO 16823, Non-destructive testing — Ultrasonic testing — Transmission technique
ISO 16826, Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to
the surface
ISO 16827, Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities
ISO 16828, Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for
detection and sizing of discontinuities
© ISO 2012 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST EN ISO 16823:2014
---------------------- Page: 12 ----------------------
SIST EN ISO 16823:2014
INTERNATIONAL STANDARD ISO 16823:2012(E)
Non-destructive testing — Ultrasonic testing — Transmission
technique
1 Scope
This International Standard specifies the principles of transmission techniques.
Transmission techniques can be used for:
⎯ detection of imperfections;
⎯ determination of attenuation.
The general principles required for the use of ultrasonic examination of industrial products are described in
ISO 16810.
The transmission technique is used for examination of flat products, e.g. plates and sheets.
Further, it is used for examinations e.g.:
⎯ where the shape, dimensions or orientation of possible imperfections are unfavourable for direct
reflection;
⎯ in materials with high attenuation;
⎯
...
SLOVENSKI STANDARD
kSIST FprEN ISO 16823:2013
01-november-2013
1HSRUXãLWYHQRSUHVNXãDQMH8OWUD]YRþQHSUHLVNDYH7HKQLNDSUH]YRþHQMD ,62
Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012)
Zerstörungsfreie Prüfung - Ultraschallprüfung - Durchschallungstechnik (ISO
16823:2012)
Essais non destructifs - Contrôle par ultrasons - Technique par transmission (ISO
16823:2012)
Ta slovenski standard je istoveten z: FprEN ISO 16823
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
kSIST FprEN ISO 16823:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
kSIST FprEN ISO 16823:2013
---------------------- Page: 2 ----------------------
kSIST FprEN ISO 16823:2013
EUROPEAN STANDARD
FINAL DRAFT
FprEN ISO 16823
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2013
ICS 19.100 Will supersede EN 583-3:1997
English Version
Non-destructive testing - Ultrasonic testing - Transmission
technique (ISO 16823:2012)
Essais non destructifs - Contrôle par ultrasons - Technique Zerstörungsfreie Prüfung - Ultraschallprüfung -
par transmission (ISO 16823:2012) Durchschallungstechnik (ISO 16823:2012)
This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical
Committee CEN/TC 138.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprEN ISO 16823:2013: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
kSIST FprEN ISO 16823:2013
FprEN ISO 16823:2013 (E)
Contents
Page
Foreword .3
2
---------------------- Page: 4 ----------------------
kSIST FprEN ISO 16823:2013
FprEN ISO 16823:2013 (E)
Foreword
The text of ISO 16823:2012 has been prepared by Technical Committee ISO/TC 135 “Non-destructive testing”
of the International Organization for Standardization (ISO) and has been taken over as FprEN ISO
16823:2013 by Technical Committee CEN/TC 138 “Non-destructive testing” the secretariat of which is held by
AFNOR.
This document is currently submitted to the Unique Acceptance Procedure.
This document will supersede EN 583-3:1997.
Endorsement notice
The text of ISO 16823:2012 has been approved by CEN as FprEN ISO 16823:2013 without any modification.
3
---------------------- Page: 5 ----------------------
kSIST FprEN ISO 16823:2013
---------------------- Page: 6 ----------------------
kSIST FprEN ISO 16823:2013
INTERNATIONAL ISO
STANDARD 16823
First edition
2012-04-01
Non-destructive testing — Ultrasonic
testing — Transmission technique
Essais non destructifs — Contrôle par ultrasons — Technique par
transmission
Reference number
ISO 16823:2012(E)
©
ISO 2012
---------------------- Page: 7 ----------------------
kSIST FprEN ISO 16823:2013
ISO 16823:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
---------------------- Page: 8 ----------------------
kSIST FprEN ISO 16823:2013
ISO 16823:2012(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope.1
2 Normative references.1
3 Terms and definitions .1
4 Principles of the examination .1
4.1 Basic techniques and set-up.1
4.2 Capability of detection of imperfections.3
4.3 Requirements for geometry and access.4
4.4 Effects of variations in coupling, angulation and alignment of probe .4
5 Examination technique.4
5.1 General.4
5.2 Sensitivity setting.4
5.3 Scanning.4
5.4 Evaluation of imperfections .4
5.5 Determination of attenuation coefficient .5
© ISO 2012 – All rights reserved iii
---------------------- Page: 9 ----------------------
kSIST FprEN ISO 16823:2013
ISO 16823:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 16823 was prepared by Technical Committee ISO/TC 135, Non-destructive testing, Subcommittee SC 3,
Ultrasonic testing.
iv © ISO 2012 – All rights reserved
---------------------- Page: 10 ----------------------
kSIST FprEN ISO 16823:2013
ISO 16823:2012(E)
Introduction
This International Standard is based on EN 583-3:1997, Non-destructive testing — Ultrasonic examination —
Part 3: Transmission technique.
The following International Standards are linked.
ISO 16810, Non-destructive testing — Ultrasonic testing — General principles
ISO 16811, Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
ISO 16823, Non-destructive testing — Ultrasonic testing — Transmission technique
ISO 16826, Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to
the surface
ISO 16827, Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities
ISO 16828, Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for
detection and sizing of discontinuities
© ISO 2012 – All rights reserved v
---------------------- Page: 11 ----------------------
kSIST FprEN ISO 16823:2013
---------------------- Page: 12 ----------------------
kSIST FprEN ISO 16823:2013
INTERNATIONAL STANDARD ISO 16823:2012(E)
Non-destructive testing — Ultrasonic testing — Transmission
technique
1 Scope
This International Standard specifies the principles of transmission techniques.
Transmission techniques can be used for:
⎯ detection of imperfections;
⎯ determination of attenuation.
The general principles required for the use of ultrasonic examination of industrial products are described in
ISO 16810.
The transmission technique is used for examination of flat products, e.g. plates and sheets.
Further, it is used for examinations e.g.:
⎯ where the shape, dimensions or orientation of possible imperfections are unfavourable for direct
reflection;
⎯ in materials with high attenuation;
⎯ in thin products.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
docume
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.