SIST EN 62329-3-102:2010

Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance (IEC 62329-3-102:2010)

This sheet of IEC 62329-3 gives the requirements for heat-shrinkable elastomeric moulded shape, semi-rigid material requirements and system performance. Experience of product performance indicates that this moulded shape material is suitable for inclusion in systems for operation in the following temperature ranges: -75 °C to + 120 °C. The moulded shapes may be supplied with a pre-coated adhesive. Refer to the manufacturers/suppliers for options. A guide to adhesive compatibility is given in Annex A. These moulded shapes are normally supplied in the styles and dimensions given in IEC 62329-3- 100. The colour is normally Black. Styles and dimensions other than those specifically listed in IEC 62329-3-100 may be available as custom items. These items shall be considered to comply with this standard if they comply with the property requirements listed in Table 1 with the exception of dimensions. Materials that conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

Wärmeschrumpfende Formteile - Teil 3: Anforderungen für Formteilmaße, Materialeigenschaften und Kompatibilitätsverhalten - Blatt 102: Wärmeschrumpfende Formteile aus Elastomeren, halbsteif, Materialanforderungen und Systemeigenschaften (IEC 62329-3-102:2010)

Profilés thermorétractables - Partie 3: Exigences relatives aux dimensions des profilés, exigences de matériaux et performances de compatibilité - Feuille 102: Profilés thermorétractables en élastomère, semi-rigides - Exigences relatives aux matériaux et performances du système (CEI 62329-3-102:2010)

La CEI 62329-3-102:2010 définit les exigences relatives aux profilés thermorétractables en matériau semi-rigide élastomère et aux performances du système. L'expérience gagnée dans le domaine des performances des produits indique que ce matériau de profilé est adapté à l'intégration dans des systèmes fonctionnant dans la plage de températures de -75 °C à +120 °C.

Toplotno skrčljive ulite oblike - 3. del: Specifikacijske zahteve za mere oblik, material in skladnost - 102. list: Toplotno skrčljive elastomerne ulite oblike, poltoge, zahteve za material in lastnosti sistema (IEC 62329-3-102:2010)

Ta list IEC 62329-3 podaja zahteve za toplotno skrčljive elastomerne ulite oblike, poltoge, zahteve za material in lastnosti sistema. Izkušnje glede lastnosti izdelka nakazujejo, da je ta material za ulite oblike primeren za vključitev v sisteme za operacijo v naslednjem temperaturnem razponu: od -75 °C do + 120 °C. Ulite oblike se lahko dobavljajo predhodno premazane z lepilom. O možnostih se pozanimajte pri proizvajalcih/dobaviteljih. Vodilo o združljivosti lepila je podano v Dodatku A. Te ulite oblike se običajno dobavljajo v slogih in merah, podanih v IEC 62329-3-100. Običajno so črne barve. Slogi in mere, ki niso izrecno navedeni IEC 62329-3-100, so lahko na voljo na zahtevo. Ti predmeti so skladni s tem standardom, če izpolnjujejo zahteve glede lastnosti, navedene v preglednici 1, z izjemo mer. Materiali, skladni s to specifikacijo, ustrezajo vzpostavljenim ravnem delovanja. Vendar mora uporabnik material za določeno uporabo izbrati na podlagi dejanskih zahtev za ustrezno delovanje pri takšni uporabi, in ne le na podlagi same specifikacije.

General Information

• Status: Published
• Publication Date: 19-Oct-2010
• ICS: 29.035.01 - Insulating materials in general
• Technical Committee: IIZS - Insulating materials and systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 05-Oct-2010
• Due Date: 10-Dec-2010
• Completion Date: 20-Oct-2010
• Ref Project: EN 62329-3-102:2010 - Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62329-3-102:2010
01-december-2010
7RSORWQRVNUþOMLYHXOLWHREOLNHGHO6SHFLILNDFLMVNH]DKWHYH]DPHUHREOLN
PDWHULDOLQVNODGQRVWOLVW7RSORWQRVNUþOMLYHHODVWRPHUQHXOLWHREOLNH
SROWRJH]DKWHYH]DPDWHULDOLQODVWQRVWLVLVWHPD,(&
Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape
dimensions, material requirements and compatibility performance - Sheet 102: Heat-
shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system
performance (IEC 62329-3-102:2010)
Wärmeschrumpfende Formteile - Teil 3: Anforderungen für Formteilmaße,
Materialeigenschaften und Kompatibilitätsverhalten - Blatt 102: Wärmeschrumpfende
Formteile aus Elastomeren, halbsteif, Materialanforderungen und Systemeigenschaften
(IEC 62329-3-102:2010)
Profilés thermorétractables - Partie 3: Exigences relatives aux dimensions des profilés,
exigences de matériaux et performances de compatibilité - Feuille 102: Profilés
thermorétractables en élastomère, semi-rigides - Exigences relatives aux matériaux et
performances du système (CEI 62329-3-102:2010)
Ta slovenski standard je istoveten z: EN 62329-3-102:2010
ICS:
29.035.01 Izolacijski materiali na Insulating materials in
splošno general
SIST EN 62329-3-102:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62329-3-102:2010

---------------------- Page: 2 ----------------------

SIST EN 62329-3-102:2010

EUROPEAN STANDARD
EN 62329-3-102

NORME EUROPÉENNE
September 2010
EUROPÄISCHE NORM

ICS 29.035.01


English version


Heat-shrinkable moulded shapes -
Part 3: Specification requirements for shape dimensions, material
requirements and compatibility performance -
Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid,
material requirements and system performance
(IEC 62329-3-102:2010)

Profilés thermorétractables -  Wärmeschrumpfende Formteile -
Partie 3: Exigences relatives Teil 3: Anforderungen für Formteilmaße,
aux dimensions des profilés, exigences Materialeigenschaften
de matériaux et performances und Kompatibilitätsverhalten -
de compatibilité - Blatt 102: Wärmeschrumpfende Formteile
Feuille 102: Profilés thermorétractables aus Elastomeren, halbsteif,
en élastomère, semi-rigides - Materialanforderungen
Exigences relatives aux matériaux und Systemeigenschaften
et performances du système (IEC 62329-3-102:2010)
(CEI 62329-3-102:2010)


This European Standard was approved by CENELEC on 2010-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62329-3-102:2010 E

---------------------- Page: 3 ----------------------

SIST EN 62329-3-102:2010
EN 62329-3-102:2010 - 2 -
Foreword
The text of document 15/570/FDIS, future edition 1 of IEC 62329-3-102, prepared by IEC TC 15, Solid
electrical insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 62329-3-102 on 2010-09-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-06-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-09-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62329-3-102:2010 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 62329-3-102:2010
- 3 - EN 62329-3-102:2010
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60695-11-10 1999 Fire hazard testing - EN 60695-11-10 1999
+ A1 2003 Part 11-10: Test flames - 50 W horizontal + A1 2003
and vertical flame test methods


IEC 60757 1983 Code for designation of colours HD 457 S1 1985


IEC 62329-1 2005 Heat shrinkable moulded shapes - EN 62329-1 2006
Part 1: Definitions and general requirements + corr. December 2006


IEC 62329-2 2006 Heat shrinkable moulded shapes - EN 62329-2 2006
Part 2: Methods of test


IEC 62329-3-100 2010 Heat-shrinkable moulded shapes - EN 62329-3-100 2010
Part 3: Specification requirements for shape
dimensions, material requirements and
compatibility performance - Sheet 100: Heat-
shrinkable moulded shape dimensions


ISO 1817 2005 Rubber, vulcanized - Determination of the - -
effect of liquids

---------------------- Page: 5 ----------------------

SIST EN 62329-3-102:2010

---------------------- Page: 6 ----------------------

SIST EN 62329-3-102:2010
IEC 62329-3-102
®
Edition 1.0 2010-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Heat-shrinkable moulded shapes –
Part 3: Specification requirements for shape dimensions, material requirements
and compatibility performance – Sheet 102: Heat-shrinkable elastomeric
moulded shapes, semi-rigid, material requirements and system performance

Profilés thermorétractables –
Partie 3: Exigences relatives aux dimensions des profilés, exigences
de matériaux et performances de compatibilité – Feuille 102: Profilés
thermorétractables en élastomère, semi-rigides – Exigences relatives
aux matériaux et performances du système

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
K
CODE PRIX
ICS 29.035.01 ISBN 978-2-88912-011-6
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 62329-3-102:2010
– 2 – 62329-3-102 © IEC:2010
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

HEAT-SHRINKABLE MOULDED SHAPES –

Part 3: Specification requirements for shape dimensions,
material requirements and compatibility performance –
Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid,
material requirements and system performance


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all
national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-
operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in
this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also
participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in
accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all interested
IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between any
IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services
carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or other
damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising
out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn t
...