SIST EN 2591-403:2012
(Main)Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration
Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration
This European Standard specifies a method of determining the ability of elements of connection to withstand sinusoidal or random vibrations of specified severities. It will be used together with EN 2591-100. This test is based on EN 60068-2-6 and EN 60068-2-64.
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 403: Sinus- und rauschförmige Schwingungen
Diese Europäische Norm legt ein Verfahren zum Nachweis der Widerstandsfähigkeit von Verbindungsele-menten gegen¬über sinus- und rauschförmigen Schwingungen festgelegter Schärfegrade fest.
Sie ist gemeinsam mit EN 2591-100 anzuwenden.
Die Prüfung basiert auf EN 60068-2-6 und EN 60068-2-64.
Série aérospatiale - Alliage de Organes de connexion électrique et optique - Méthodes d'essais - Partie 403 : Vibrations sinusoïdales et aléatoires
La présente Norme Européenne spécifie une méthode pour déterminer l'aptitude des organes de connexion à supporter des vibrations sinusoïdales et aléatoires à des sévérités spécifiées.
Elle doit être utilisée conjointement avec l'EN 2591-100.
Cet essai est basé sur l'EN 60068-2-6 et l'EN 60068-2-64.
Aeronavtika - Elementi električnih in optičnih povezav - Preskusne metode - 403. del: Sinusna in naključna nihanja
Ta evropski standard določa metodo za ugotavljanje odpornosti elementov povezav na sinusoidna ali naključna nihanja določenih moči. Uporablja se skupaj s standardom EN 2591-100. Ta preskus temelji na standardih EN 60068-2-6 in EN 60068-2-64.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 2591-403:2012
01-oktober-2012
1DGRPHãþD
SIST EN 2591-403:2001
$HURQDYWLND(OHPHQWLHOHNWULþQLKLQRSWLþQLKSRYH]DY3UHVNXVQHPHWRGH
GHO 6LQXVQDLQQDNOMXþQDQLKDQMD
Aerospace series - Elements of electrical and optical connection - Test methods - Part
403: Sinusoidal and random vibration
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren -
Teil 403: Sinus- und rauschförmige Schwingungen
Série aérospatiale - Alliage de Organes de connexion électrique et optique - Méthodes
d'essais - Partie 403 : Vibrations sinusoïdales et aléatoires
Ta slovenski standard je istoveten z: EN 2591-403:2012
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 2591-403:2012 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 2591-403:2012
---------------------- Page: 2 ----------------------
SIST EN 2591-403:2012
EUROPEAN STANDARD
EN 2591-403
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2012
ICS 49.060; 49.090 Supersedes EN 2591-403:1998
English Version
Aerospace series - Elements of electrical and optical connection
- Test methods - Part 403: Sinusoidal and random vibration
Série aérospatiale - Alliage de Organes de connexion Luft- und Raumfahrt - Elektrische und optische
électrique et optique - Méthodes d'essais - Partie 403: Verbindungselemente - Prüfverfahren - Teil 403: Sinus- und
Vibrations sinusoïdales et aléatoires rauschförmige Schwingungen
This European Standard was approved by CEN on 23 March 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2591-403:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 2591-403:2012
EN 2591-403:2012 (E)
Contents Page
Foreword . 3
1 Scope . 4
2 Normative references . 4
3 Preparation of specimens . 4
4 Method A – Sinusoidal vibration . 5
5 Method B – Random vibration . 7
2
---------------------- Page: 4 ----------------------
SIST EN 2591-403:2012
EN 2591-403:2012 (E)
Foreword
This document (EN 2591-403:2012) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2013, and conflicting national standards shall be withdrawn
at the latest by February 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 2591-403:1998.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 2591-403:2012
EN 2591-403:2012 (E)
1 Scope
This European Standard specifies a method of determining the ability of elements of connection to withstand
sinusoidal or random vibrations of specified severities.
It will be used together with EN 2591-100.
This test is based on EN 60068-2-6 and EN 60068-2-64.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 2591-100, Aerospace series — Elements of electrical and optical connection — Test methods — Part 100:
General
EN 2591-101, Aerospace series — Elements of electrical and optical connection
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.