SIST EN 4718:2022
(Main)Aerospace series - Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) - Stock shape material - Material specification
Aerospace series - Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) - Stock shape material - Material specification
This document specifies the requirements of a thermoplastic composite stock shape material (e.g. tape,
rod etc.) consisting of polyetheretherketone with 55 % continuous glass fibres by volume (PEEK–GF55)
for aerospace applications, which is presupposed to be used in a further thermal moulding process for
forming parts described in EN 4714 1).
Luft- und Raumfahrt - Polyetheretherketon mit 55 Volumen % (PEEK–GF55) endlos Glasfaser - Halbfabrikat - Materialspezifikation
Dieses Dokument legt die Anforderungen an ein aus Polyetheretherketon mit 55 % Volumenanteil Endlosglasfaser (PEEK-GF55) bestehendes thermoplastisches Verbundwerkstoff Halbfabrikat (z. B. Streifen, Stab usw.) für Anwendungen in der Luft und Raumfahrt fest, dessen Verwendung in einem weiteren thermischen Formgussverfahren zur Formung von in EN 4714 beschriebenen Teilen verwendet wird.
Série aérospatiale - Polyétheréthercétone avec 55 % de fibre de verre continue par volume (PEEK-GF55) - Demi-produit - Spécification de matériau
Aeronavtika - Polietereterketon s 55 % neprekinjenih steklenih vlaken (PEEK-GF55) - Zaloga materiala - Specifikacija materialov
Ta dokument določa zahteve za zalogo plastomernega kompozitnega materiala (npr. trakovi, palice itd.) iz polietereterketona s 55 % neprekinjenih steklenih vlaken (PEEK-GF55) za uporabo v aeronavtiki, ki naj bi se uporabljal v nadaljnjem postopku toplotnega oblikovanja delov, opisanih v standardu EN 4714-1).
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 4718:2022
01-maj-2022
Aeronavtika - Polietereterketon s 55 % neprekinjenih steklenih vlaken (PEEK-
GF55) - Zaloga materiala - Specifikacija materialov
Aerospace series - Polyetheretherketone with 55 % continuous glass fibre by volume
(PEEK-GF55) - Stock shape material - Material specification
Luft- und Raumfahrt - Polyetheretherketon mit 55 Volumen % (PEEK–GF55) endlos
Glasfaser - Halbfabrikat - Materialspezifikation
Série aérospatiale - Polyétheréthercétone avec 55 % de fibre de verre continue par
volume (PEEK-GF55) - Demi-produit - Spécification de matériau
Ta slovenski standard je istoveten z: EN 4718:2022
ICS:
49.025.40 Guma in polimerni materiali Rubber and plastics
SIST EN 4718:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 4718:2022
---------------------- Page: 2 ----------------------
SIST EN 4718:2022
EN 4718
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2022
EUROPÄISCHE NORM
ICS 49.025.40
English Version
Aerospace series - Polyetheretherketone with 55 %
continuous glass fibre by volume (PEEK-GF55) - Stock
shape material - Material specification
Série aérospatiale - Polyétheréthercétone avec 55 % de Luft- und Raumfahrt - Polyetheretherketon mit 55
fibre de verre continue par volume (PEEK-GF55) - Volumen % (PEEK-GF55) endlos Glasfaser -
Demi-produit - Spécification de matériau Halbfabrikat - Materialspezifikation
This European Standard was approved by CEN on 25 July 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4718:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 4718:2022
EN 4718:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Requirements . 5
2
---------------------- Page: 4 ----------------------
SIST EN 4718:2022
EN 4718:2022 (E)
European foreword
This document (EN 4718:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this
document has received the approval of the National Associations and the Official Services of the
member countries of ASD, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2022, and conflicting national standards shall
be withdrawn at the latest by September 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this document: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 4718:2022
EN 4718:2022 (E)
1 Scope
This document specifies the requirements of a thermoplastic composite stock shape material (e.g. tape,
rod etc.) consisting of polyetheretherketone with 55 % continuous glass fibres by volume (PEEK–GF55)
for aerospace applications, which is presupposed to be used in a further thermal moulding process for
1)
forming parts described in EN 4714 .
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. F
...
SLOVENSKI STANDARD
oSIST prEN 4718:2021
01-junij-2021
Aeronavtika - Polietereterketon s 55 % neprekinjenih steklenih vlaken (PEEK-
GF55) - Zaloga materiala - Specifikacija materialov
Aerospace series - Polyetheretherketone with 55 % continuous glass fibre by volume
(PEEK-GF55) - Stock shape material - Material specification
Luft- und Raumfahrt - Polyetheretherketon mit 55 Volumen-% Endlos-Glasfaser (PEEK-
GF55) - Halbfabrikat - Materialspezifikation
Série aérospatiale - Polyétheréthercétone avec 55 % de fibre de verre continue par
volume (PEEK-GF55) - Demi-produit - Spécification de matériau
Ta slovenski standard je istoveten z: prEN 4718
ICS:
49.025.40 Guma in polimerni materiali Rubber and plastics
oSIST prEN 4718:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 4718:2021
---------------------- Page: 2 ----------------------
oSIST prEN 4718:2021
DRAFT
EUROPEAN STANDARD
prEN 4718
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2021
ICS 49.025.40
English Version
Aerospace series - Polyetheretherketone with 55 %
continuous glass fibre by volume (PEEK-GF55) - Stock
shape material - Material specification
Série aérospatiale - Polyétheréthercétone avec 55 % de Luft- und Raumfahrt - Polyetheretherketon mit 55
fibre de verre continue par volume (PEEK-GF55) - Volumen-% Endlos-Glasfaser (PEEK-GF55) -
Demi-produit - Spécification de matériau Halbfabrikat - Materialspezifikation
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4718:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 4718:2021
prEN 4718:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Requirements . 5
2
---------------------- Page: 4 ----------------------
oSIST prEN 4718:2021
prEN 4718:2021 (E)
European foreword
This document (prEN 4718:2021) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the Enquiry.
This document will supersede EN 4718:2014.
3
---------------------- Page: 5 ----------------------
oSIST prEN 4718:2021
prEN 4718:2021 (E)
1 Scope
This document specifies the requirements of a thermoplastic composite stock shape material (e.g. tape,
rod etc.) consisting of polyetheretherketone with 55 % continuous glass fibres by volume (PEEK –
GF55) for aerospace applications, which is presupposed to be used in a further thermal moulding
1)
process for forming parts described in prEN 4714 .
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.