SIST EN 16337:2013
(Main)Hardware for Furniture - Strength and loading capacity of shelf supports
Hardware for Furniture - Strength and loading capacity of shelf supports
This European Standard specifies test methods for the verification of the loading capacity of shelf supports. This standard does not apply to ceiling attached shelf support systems. The tests consist of the application of vertical loads and forces simulating normal functional use, as well as
misuse that might reasonably be expected to occur. With the exception of the corrosion test in 6.4, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes. The strength tests include only the shelf supports and their components as well as the attachment to the cabinet and/or to the wall. If the shelf support has additional functions, e.g. as a connector or as an extension element, these are not covered by this standard. The test results are only valid for the shelf supports tested. The results may be used to represent the performance of production models provided that the tested model is representative of the production model. The test results can only be used as a guide to the performance of the shelf supports. With the exception of the corrosion test, ageing and influences of temperature and humidity are not included.
Annex A (normative) includes requirements for product information.
Annex B (normative) includes test parameters.
Annex C (informative) includes method for the determination of loading capacity.
Möbelbeschläge - Festigkeit und Tragfähigkeit von Bodenträgern
Die vorliegende Europäische Norm legt Prüfverfahren zur Überprüfung der Tragfähigkeit von Bodenträgern fest.
Die vorliegende Norm gilt nicht für an der Decke befestigte Bodenträgersysteme.
Die Prüfungen bestehen aus dem Aufbringen von Vertikallasten und -kräften, welche den bestimmungs-gemäßen Gebrauch wie auch vernünftigerweise vorhersehbare Fehlanwendung simulieren.
Mit Ausnahme der Prüfung der Korrosionsbeständigkeit (6.4), sind die Prüfungen so ausgelegt, Eigenschaften ohne Berücksichtigung der Werkstoffe und der Ausführungs-/Konstruktions- oder Herstellungsverfahren zu bewerten.
Die Festigkeitsprüfung umfasst ausschließlich die Bodenträger und deren Bestandteile sowie die Befestigung am Schrank und/oder an der Wand. Wenn der Bodenträger zusätzliche Funktionen besitzt, z. B. als ein Ver-bindungs- oder als ein Erweiterungselement, so werden diese in der vorliegenden Norm nicht behandelt.
Die Prüfergebnisse gelten nur für die geprüften Bodenträger. Die Ergebnisse dürfen dazu verwendet werden, das Leistungsvermögen des Serienmodells zu repräsentieren, vorausgesetzt das geprüfte Baumuster ist für das Serienmodell repräsentativ.
Die Prüfergebnisse können ausschließlich als Richtwerte für das Leistungsvermögen von Bodenträgern ver-wendet werden.
Mit Ausnahme der Prüfung der Korrosionsbeständigkeit sind Alterung sowie Einflüsse von Temperatur und Luftfeuchte nicht enthalten.
Anhang A (normativ) enthält Anforderungen an Produktinformationen.
Anhang B (normativ) enthält Prüfparameter.
Anhang C (informativ) enthält ein Verfahren zur Bestimmung der Tragfähigkeit.
Quincaillerie d'ameublement - Résistance mécanique et capacité de charge des supports d'étagère
La présente Norme européenne spécifie les méthodes d'essai pour la vérification de la capacité de charge des supports d’étagère.
Elle ne s’applique pas aux systèmes de supports d’étagère fixés au plafond.
Les essais consistent à appliquer des charges et des forces verticales simulant un usage fonctionnel normal et un mauvais usage raisonnablement prévisible.
À l’exception de l’essai de corrosion décrit en 6.4, les essais sont conçus pour évaluer les propriétés quels que soient les matériaux, la conception/construction et les procédés de fabrication.
Les essais de résistance mécanique portent sur les supports d’étagère et leurs composants, ainsi que sur la fixation au meuble et/ou au mur. Si le taquet a des fonctions supplémentaires, par exemple s’il sert de connecteur ou d’élément d’extension, celles-ci ne sont pas couvertes par la présente norme.
Les résultats d’essai ne sont valables que pour les supports d’étagère soumis à l’essai. Ces résultats peuvent être utilisés pour indiquer les performances des modèles fabriqués à condition que le modèle soumis à l’essai soit représentatif du modèle fabriqué.
Les résultats d’essai ne peuvent servir que de guide en matière de performances des supports d’étagère.
À l’exception de l’essai de corrosion, le vieillissement et l’influence de la température et de l’humidité ne sont pas traités.
L’Annexe A (normative) comprend les exigences relatives aux informations sur le produit.
L’Annexe B (normative) traite des paramètres d’essai.
L’Annexe C (informative) donne une méthode de détermination de la capacité de charge.
Pohištveno okovje - Trdnost in nosilnost nosilcev polic
Ta evropski standard določa preskusne metode za preverjanje nosilnosti nosilcev polic. Ta standard se ne uporablja za sisteme nosilcev polic za pritrditev na strop. Preskus zajema obremenjevanje z navpičnimi bremeni in silami, ki nastanejo ob običajni funkcionalni uporabi ter tudi ob pričakovani nepravilni uporabi. Razen korozijskega preskusa iz točke 6.4 so preskusi so namenjeni vrednotenju lastnosti ne glede na materiale, obliko/sestavo ali postopke izdelave. Preskusi trdnosti zajemajo le nosilce polic in njihove sestavne dele ter pritrditev na omaro in/ali steno. Če ima nosilec police dodatne funkcije, npr. kot spojnik, ali ima podaljšek, tega ta standard ne zajema. Rezultati preskusa veljajo le za preskušene nosilce polic. Rezultati se lahko uporabijo za predstavitev lastnosti proizvodnih modelov, če preskusni model ustreza proizvodnemu modelu. Rezultati preskusa so zgolj smernice za lastnosti nosilcev polic. Staranje ter vplivi temperature in vlage niso vključeni, razen pri korozijskem preskusu.
Dodatek A (normativni) vključuje zahteve za informacije v zvezi z izdelkom.
Dodatek B (normativni) zajema preskusne parametre.
Dodatek C (informativni) zajema metode za ugotavljanje nosilnosti.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Pohištveno okovje - Trdnost in nosilnost nosilcev policMöbelbeschläge - Festigkeit und Tragfähigkeit von BodenträgernQuincaillerie d'ameublement - Résistance mécanique et capacité de charge des supports d'étagèreHardware for Furniture - Strength and loading capacity of shelf supports97.140PohištvoFurnitureICS:Ta slovenski standard je istoveten z:EN 16337:2013SIST EN 16337:2013en,fr,de01-julij-2013SIST EN 16337:2013SLOVENSKI
STANDARD
SIST EN 16337:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16337
June 2013 ICS 97.140 English Version
Hardware for furniture - Strength and loading capacity of shelf supports
Quincaillerie d'ameublement - Résistance mécanique et capacité de charge des supports d'étagère
Möbelbeschläge - Festigkeit und Tragfähigkeit von Bodenträgern This European Standard was approved by CEN on 1 May 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16337:2013: ESIST EN 16337:2013
EN 16337:2013 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .5 4 General test condition .5 4.1 Preliminary preparation .5 4.2 Test equipment .5 4.2.1 Test wall .5 4.2.2 Particle board properties .5 4.2.3 Melamine faced particleboard .6 4.2.4 Steel impact plates .6 4.2.5 Masses .6 4.3 Tolerances (allowed variation from the nominal values).6 5 Test set-up .6 6 Test procedures and requirements .7 6.1 General .7 6.2 Strength requirements and tests .8 6.3 Verification of loading capacity .8 6.3.1 General .8 6.3.2 Impact test .8 6.3.3 Sustained load test . 10 6.4 Corrosion resistance . 10 7 Test report . 10 Annex A (normative)
Requirements for product information . 11 A.1 General . 11 A.2 Field of application . 11 A.3 Loading capacity, M. 11 A.4 Adjustment systems . 11 A.5 Corrosion test . 11 A.6 Mounting instructions . 11 Annex B (normative)
Test parameters for impact plates (4.2.4) . 12 Annex C (informative)
Determination of loading capacity . 13 C.1 Determination of breaking load . 13 C.2 Calculation of loading capacity, M . 13 Bibliography . 14
SIST EN 16337:2013
EN 16337:2013 (E) 3 Foreword This document (EN 16337:2013) has been prepared by Technical Committee CEN/TC 207 “Furniture”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2013, and conflicting national standards shall be withdrawn at the latest by December 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 16337:2013
EN 16337:2013 (E) 4 1 Scope This European Standard specifies test methods for the verification of the loading capacity of shelf supports. This standard does not apply to ceiling attached shelf support systems. The tests consist of the application of vertical loads and forces simulating normal functional use, as well as misuse that might reasonably be expected to occur. With the exception of the corrosion test in 6.4, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes. The strength tests include only the shelf supports and their components as well as the attachment to the cabinet and/or to the wall. If the shelf support has additional functions, e.g. as a connector or as an extension element, these are not covered by this standard. The test results are only valid for the shelf supports tested. The results may be used to represent the performance of production models provided that the tested model is representative of the production model. The test results can only be used as a guide to the performance of the shelf supports. With the exception of the corrosion test, ageing and influences of temperature and humidity are not included. Annex A (normative) includes requirements for product information. Annex B (normative) includes test parameters. Annex C (informative) includes method for the determination of loading capacity. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 320, Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws EN 323, Wood-based panels - Determination of density EN 14322, Wood-based panels - Melamine faced boards for interior uses - Definition, requirements and classification EN ISO 6270-2, Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres (ISO 6270-2) ISO 7619-2, Rubber, vulcanized or thermoplastic — Determination of indentation hardness — Part 2: IRHD pocket meter method SIST EN 16337:2013
EN 16337:2013 (E) 5 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 loading capacity M mass in kg, for one shelf support as specified by the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.