iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.

97.200.30 - Camping equipment and camp-sites

ICS 97.200.30 Details

Camping equipment and camp-sites

Campingausrustung. Campingplatze

Matériel et terrains de camping

Oprema za taborjenje in tabori

General Information

Parent
97.200 - Equipment for entertainment

e-Library Subscription

Create subscription and get permanent access to documents within 97.200.30 - Camping equipment and camp-sites

Type
Monthly Subscription
for
seat
×
$ 115.53
$ 115.53

Currently subscription includes documents marked with .We are working on making all documents available within the subscription.

Standardization Organization
Technical Committee
Directive
Mandate
50
SIST
SIST EN ISO 23537-2:2023(Main)
Requirements for sleeping bags - Part 2: Fabric and material properties (ISO 23537-2:2023)
EN ISO 23537-2:2023

This document specifies the fabric and material properties as well as provisions for labelling of adult sized sleeping bags for use in sports and leisure time activities.
This document does not apply to sleeping bags intended for specific purposes such as military use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23537-2:2023(Main)
Requirements for sleeping bags - Part 2: Fabric and material properties (ISO 23537-2:2023)
SIST EN ISO 23537-2:2023

This document specifies the fabric and material properties as well as provisions for labelling of adult sized sleeping bags for use in sports and leisure time activities.
This document does not apply to sleeping bags intended for specific purposes such as military use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 23537-2:2023(Main)
Requirements for sleeping bags — Part 2: Fabric and material properties

This document specifies the fabric and material properties as well as provisions for labelling of adult sized sleeping bags for use in sports and leisure time activities. This document does not apply to sleeping bags intended for specific purposes such as military use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
ISO
ISO 7152:2023(Main)
Camping tents and caravan awnings — Vocabulary

This document gives a list of the most frequent terms relating to camping tents and caravan awnings together with some definitions.

  • Standard
    30 pages
    English language
    sale 15% off
CEN
EN 17667:2022(Main)
Test method - Determination of thermal resistance of filled textile articles and similar items using small guarded hotplate apparatus
SIST EN 17667:2022

This method of test specifies a test method for determining the thermal resistance of textile articles which may be filled, e.g. padded coats and jackets, child sleep bags, cot duvets, etc., or textiles articles with a thermal resistance of up to 0,5 m2K/W (5,0 tog) and/or which do not have uniform thickness.
The test method is applicable to products with a thermal resistance within the range 0,025 m2K/W (0,25 tog) to approximately 0,5 m2K/W (5,0 tog) but is limited only by the ability of the test apparatus to cope with the thickness of the test sample.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23537-1:2022(Main)
Requirements for sleeping bags - Part 1: Thermal, mass and dimensional requirements for sleeping bags designed for limit temperatures of ‐20°C and higher (ISO 23537-1:2022)
SIST EN ISO 23537-1:2022

This document specifies the requirements, test methods and other provisions for the labelling of adult sized sleeping bags for use in sports and leisure time activities at a limit temperature ≥ ‐20 °C regarding thermal characteristics, dimensions and mass.
This document describes a method for the assessment of performance in steady‐state conditions of a sleeping bag with regard to the protection against cold.
NOTE 1    Sleeping bags without homogeneous fillings designed to provide local extra insulation in certain parts pose issues with the calibration and/or test procedure. Ongoing work continues to provide suitable means of establishing temperature ratings.
This document does not apply to sleeping bags intended for specific purpose such as military use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies.
NOTE 2    No prediction model exists for the determination of the limiting temperatures based on the thermal resistance of the sleeping bag for children and babies. Moreover, such a model for testing cannot be developed because the necessary controlled sleep trials with children or babies in climatic chambers are, out of ethical reasons, not possible.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 23537-1:2022(Main)
Requirements for sleeping bags - Part 1: Thermal, mass and dimensional requirements for sleeping bags designed for limit temperatures of ‐20°C and higher (ISO 23537-1:2022)
EN ISO 23537-1:2022

This document specifies the requirements, test methods and other provisions for the labelling of adult
sized sleeping bags for use in sports and leisure time activities at a limit temperature ≥ ‐20 °C regarding
thermal characteristics, dimensions and mass.
This document describes a method for the assessment of performance in steady‐state conditions of a
sleeping bag with regard to the protection against cold.
NOTE 1 Sleeping bags without homogeneous fillings designed to provide local extra insulation in certain
parts pose issues with the calibration and/or test procedure. Ongoing work continues to provide suitable means
of establishing temperature ratings.
This document does not apply to sleeping bags intended for specific purpose such as military use and
extreme climate zone expedition. It does not apply to sleeping bags for children or babies.
NOTE 2 No prediction model exists for the determination of the limiting temperatures based on the thermal
resistance of the sleeping bag for children and babies. Moreover, such a model for testing cannot be developed
because the necessary controlled sleep trials with children or babies in climatic chambers are, out of ethical
reasons, not possible.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17667:2022(Main)
Test method - Determination of thermal resistance of filled textile articles and similar items using small guarded hotplate apparatus
EN 17667:2022

This method of test described a means of determining the thermal resistance of textile assemblies with a non-uniform thickness and child sleep bags and cot duvets. The test method is suitable for products with a thermal resistance within the range 0.25 tog (0.025 m².K/W) to 5.0 tog (0.5 m².K/W).

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 23537-1:2022(Main)
Requirements for sleeping bags — Part 1: Thermal, mass and dimensional requirements for sleeping bags designed for limit temperatures of ‐20°C and higher

This document specifies the requirements, test methods and other provisions for the labelling of adult sized sleeping bags for use in sports and leisure time activities at a limit temperature ≥ ‐20 °C regarding thermal characteristics, dimensions and mass. This document describes a method for the assessment of performance in steady‐state conditions of a sleeping bag with regard to the protection against cold. NOTE 1 Sleeping bags without homogeneous fillings designed to provide local extra insulation in certain parts pose issues with the calibration and/or test procedure. Ongoing work continues to provide suitable means of establishing temperature ratings. This document does not apply to sleeping bags intended for specific purpose such as military use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies. NOTE 2 No prediction model exists for the determination of the limiting temperatures based on the thermal resistance of the sleeping bag for children and babies. Moreover, such a model for testing cannot be developed because the necessary controlled sleep trials with children or babies in climatic chambers are, out of ethical reasons, not possible.

  • Standard
    25 pages
    English language
    sale 15% off
  • Standard
    26 pages
    French language
    sale 15% off
CEN
EN 1949:2021(Main)
Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles
SIST EN 1949:2022

This document specifies the requirements for the installation of liquefied petroleum gas systems for habitation purposes in leisure accommodation vehicles and for accommodation purposes in other vehicles.
It details health and safety requirements on:
—   the selection of materials;
—   components and appliances;
—   design considerations;
—   tightness testing of installations;
—   the contents of the user's handbook.
This document only covers installations supplied with 3rd family gases (LPG).
It does not cover:
—   water connections or electrical power supplies to the appliance(s);
—   portable appliances, incorporating their own LPG supply;
—   the installation of LPG appliances to be used for commercial purposes;
—   LPG installations on boats;
—   LPG supply equipment and LPG appliances separate from and external to the body of the vehicle.
This document covers LPG tanks fulfilling the requirements of the Pressure Equipment Directive (2014/68/EU).
Attention is drawn to the Pressure Equipment Directive (2014/68/EU) for any parts of the installation operating above 0,5 bar.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5912:2020(Main)
Camping tents - Requirements and test methods (ISO 5912:2020)
SIST EN ISO 5912:2020

This document specifies the requirements on safety, performance and fitness for use of camping tents.
NOTE    For caravan awnings, see ISO 8936.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
HD 60364-7-708:2017(Main)
Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations
SIST HD 60364-7-708:2017

IEC 60364-7-708:2017(E) lays down requirements applying only to circuits intended to supply leisure accommodation vehicles, tents or residential park homes in caravan parks, camping parks and similar locations. This new edition includes the following significant technical changes with respect to the previous edition: - new requirements to protect against impact; - new requirements for socket outlets and connectors.

  • Standardization document
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 5912:2020(Main)
Camping tents - Requirements and test methods (ISO 5912:2020)
EN ISO 5912:2020

EN-ISO 5912 specifies the requirements on safety, performance and fitness for use of camping tents.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 5912:2020(Main)
Camping tents — Requirements and test methods

This document specifies the requirements on safety, performance and fitness for use of camping tents. NOTE For caravan awnings, see ISO 8936.

  • Standard
    24 pages
    English language
    sale 15% off
  • Standard
    24 pages
    English language
    sale 15% off
  • Standard
    25 pages
    French language
    sale 15% off
  • Standard
    25 pages
    French language
    sale 15% off
SIST
SIST EN 581-1:2017(Main)
Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 1: General safety requirements
EN 581-1:2017

This European Standard specifies the general safety requirements for outdoor seating and tables for adults for camping, domestic and contract use.
It does not apply to removable upholstery, coverings, seating for spectator facilities, seating and tables for children.
Mechanical safety requirements are covered by prEN 581-2 for seating and prEN 581-3 for tables.
Annex A (informative) is a schematic presentation of requirements and conditions concerning shear and squeeze points.
Annex B (informative) is a rational concerning fingers entrapment.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 581-3:2017(Main)
Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 3: Mechanical safety requirements for tables
EN 581-3:2017

This European Standard specifies the mechanical safety requirements and test methods for outdoor tables used by adults for camping, domestic and contract use without regard to materials, design/construction or manufacturing processes. This standard excludes tables using glass in their construction. This document does not apply to outdoor furniture for severe contract use where higher requirements may be necessary, nor does it apply to street furniture and furniture permanently fixed to the ground/wall. Annex A (informative) specifies guidelines for purchase information. Information regarding ageing and degradation caused by light, temperature and moisture has not been included.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 581-1:2017(Main)
Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 1: General safety requirements
SIST EN 581-1:2017

This European Standard specifies the general safety requirements for outdoor seating and tables for adults for camping, domestic and contract use.
It does not apply to removable upholstery, coverings, seating for spectator facilities, seating and tables for children.
Mechanical safety requirements are covered by prEN 581-2 for seating and prEN 581-3 for tables.
Annex A (informative) is a schematic presentation of requirements and conditions concerning shear and squeeze points.
Annex B (informative) is a rational concerning fingers entrapment.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 60364-7-708:2017(Main)
Low-voltage electrical installations - Part 7-708: Requirements for special installations or location - Caravan parks, camping parks and similar locations
HD 60364-7-708:2017

The particular requirements contained in this part of IEC 60364 apply only to circuits intended
to supply leisure accommodation vehicles, tents or residential park homes in caravan parks,
camping parks and similar locations.
NOTE For the purposes of this document caravan park includes camping parks and similar locations.
The particular requirements do not apply to the internal electrical installations of leisure
accommodation vehicles, mobile or transportable units or residential park homes.

  • Standardization document
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8936:2017(Main)
Awnings for leisure accommodation vehicles - Requirements and test methods (ISO 8936:2017)
SIST EN ISO 8936:2017

ISO 8936:2017 specifies requirements, test methods and material performance characteristics for vehicle awnings. It applies to awnings intended to be pitched and struck.
ISO 8936:2017 is not applicable to:
a)    sun awnings: structure detachable from the vehicle which is used to provide shelter from the sun, but is not designed or constructed to provide shelter from wind, rain or snow;
NOTE 1       A sun awning can be used with additional front and side panels to form an enclosure, but this enclosure would not meet the requirements of an awning as defined in this document.
b)    external blinds: structure permanently fixed to a vehicle which is used to provide shelter from the sun, but is not designed or constructed to provide shelter from wind, rain or snow;
NOTE 2       An external blind can be used with additional front and side panels to form an enclosure, but this enclosure would not meet the requirements of an awning as defined in this document.
c)    fixed awnings: permanent awning which is not designed for mobile use.
EXAMPLE       Awnings equipped with square aluminium frames or timber supporting structures and the possibility to install living compartment windows and doors.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 581-3:2017(Main)
Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 3: Mechanical safety requirements for tables
SIST EN 581-3:2017

This European Standard specifies the minimum requirements for the safety, strength and durability of all types of outdoor tables for adults, without regard to materials, design/construction or manufacturing processes.
It does not apply to street furniture.
With the exception of stability tests the standard does not provide assessment of the suitability of any storage features included in tables.
It does not include requirements for the durability of castors/wheels and height adjustment mechanisms.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing and degradation caused by light, temperature and moisture.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 8936:2017(Main)
Awnings for leisure accommodation vehicles - Requirements and test methods (ISO 8936:2017)
EN ISO 8936:2017

This document specifies requirements, test methods and material performance characteristics for
vehicle awnings. It applies to awnings intended to be pitched and struck.
This document is not applicable to:
a) sun awnings: structure detachable from the vehicle which is used to provide shelter from the sun,
but is not designed or constructed to provide shelter from wind, rain or snow;
NOTE 1 A sun awning can be used with additional front and side panels to form an enclosure, but this
enclosure would not meet the requirements of an awning as defined in this document.
b) external blinds: structure permanently fixed to a vehicle which is used to provide shelter from the
sun, but is not designed or constructed to provide shelter from wind, rain or snow;
NOTE 2 An external blind can be used with additional front and side panels to form an enclosure, but this
enclosure would not meet the requirements of an awning as defined in this document.
c) fixed awnings: permanent awning which is not designed for mobile use.
EXAMPLE Awnings equipped with square aluminium frames or timber supporting structures and the
possibility to install living compartment windows and doors.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 8936:2017(Main)
Awnings for leisure accommodation vehicles — Requirements and test methods

ISO 8936:2017 specifies requirements, test methods and material performance characteristics for vehicle awnings. It applies to awnings intended to be pitched and struck. ISO 8936:2017 is not applicable to: a) sun awnings: structure detachable from the vehicle which is used to provide shelter from the sun, but is not designed or constructed to provide shelter from wind, rain or snow; NOTE 1 A sun awning can be used with additional front and side panels to form an enclosure, but this enclosure would not meet the requirements of an awning as defined in this document. b) external blinds: structure permanently fixed to a vehicle which is used to provide shelter from the sun, but is not designed or constructed to provide shelter from wind, rain or snow; NOTE 2 An external blind can be used with additional front and side panels to form an enclosure, but this enclosure would not meet the requirements of an awning as defined in this document. c) fixed awnings: permanent awning which is not designed for mobile use. EXAMPLE Awnings equipped with square aluminium frames or timber supporting structures and the possibility to install living compartment windows and doors.

  • Standard
    26 pages
    English language
    sale 15% off
  • Standard
    26 pages
    English language
    sale 15% off
  • Standard
    26 pages
    French language
    sale 15% off
  • Standard
    26 pages
    French language
    sale 15% off
CEN
EN 13538-3:2016(Main)
Determination of dimensional characteristics of sleeping bags - Part 3: Volume under load and easiness of packing
SIST EN 13538-3:2016

This European Standard specifies a method of measurement of the volume under load of sleeping bags and a method of calculation of easiness of packing of sleeping bags filled with feather and/or down.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 581-2:2016/AC:2016(Corrigendum)
Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 2: Mechanical safety requirements and test methods for seating
EN 581-2:2015/AC:2016

Corrigendum issued in July 2016 - TC origin (modification to several tables)

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13538-3:2016(Main)
Determination of dimensional characteristics of sleeping bags - Part 3: Volume under load and easiness of packing
EN 13538-3:2016

This European Standard specifies a method of measurement of the volume under load of sleeping bags as specified in prEN 13537 and a method of calculation of easiness of packing of sleeping bags filled with feather and/or down.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 581-2:2015/AC:2016(Corrigendum)
Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 2: Mechanical safety requirements and test methods for seating
SIST EN 581-2:2016/AC:2016

Corrigendum issued in July 2016 - TC origin (modification to several tables)

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 581-2:2015(Main)
Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 2: Mechanical safety requirements and test methods for seating
SIST EN 581-2:2016

This European Standard specifies the minimum requirements for the safety, strength and durability of all types of outdoor seating for adults, without regard to materials, design/construction or manufacturing processes.
It does not apply to street furniture.
It does not apply to removable upholstery and covering.
It does not include requirements for the durability of castors/wheels and height adjustment mechanisms.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing and degradation caused by light, temperature and moisture.
The test requirements contained within this standard are based on use by persons weighing up to 110 kg.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 581-2:2016(Main)
Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 2: Mechanical safety requirements and test methods for seating
EN 581-2:2015

This part of EN 581 specifies the mechanical safety requirements and test methods of outdoor seating for camping, domestic and contract use for adults, without regard to materials, design/construction or manufacturing processes. This document does not apply to outdoor furniture for severe contract use, where higher requirements may be necessary nor to removable upholstery and coverings, permanently fixed furniture and street furniture. The test requirements contained within this European Standard are based on use by persons weighing up to 110 kg. Information regarding ageing and degradation caused by light, temperature and moisture has not been included. Annex A (normative) specifies additional test methods for seating with multi-position back rests. Annex B (normative) specifies test methods for loungers. Annex C (informative) specifies guidelines for purchase information.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15619:2014(Main)
Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
EN 15619:2014

EN 15619 specifies the characteristics, requirements and test methods for coated fabric intended for mobile, temporary installed tents and related structures. Plastic film and material other than coated fabrics are not covered by this European Standard.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15619:2014(Main)
Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
SIST EN 15619:2014

This European Standard specifies the characteristics, requirements and test methods for coated fabric intended for mobile, temporary installed tents (see 3.3) and related structures.
Plastic film and material other than coated fabrics are not covered by this European Standard.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
IEC
IEC 60364-7-708:2007(Main)
Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations

The particular requirements contained in this part of IEC 60364 apply only to circuits intended to supply leisure accommodation vehicles, tents or residential park homes in caravan parks, camping parks and similar locations. The particular requirements do not apply to the internal electrical installations of leisure accommodation vehicles, mobile or transportable units or residential park homes. For the remainder of the electrical installation of caravan parks, the general requirements of IEC 60364 together with the relevant particular requirements of Part 7 apply. This second edition of IEC 60364-7-708 cancels and replaces the first edition, published in 1988, as well as its amendment 1 (1993). It constitutes a technical revision. The main changes with respect to the previous edition concern: - requirements for the electrical installation of caravans and motor caravans are now covered by Part 721; - requirements of this part are aligned with those in other parts of IEC 60364; - one 30 mA RCD now protects only one socket-outlet.

  • Standard
    21 pages
    English and French language
    sale 15% off
SIST
SIST EN 13538-2:2003(Main)
Determination of dimensional characteristics of sleeping bags - Part 2: Thickness and elastic recovery
EN 13538-2:2002

This European Standard specifies a method for the determination of the thickness and elastic recovery of sleeping bags filled with feathers and/or down.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13538-2:2002(Main)
Determination of dimensional characteristics of sleeping bags - Part 2: Thickness and elastic recovery
SIST EN 13538-2:2003

This European Standard specifies a method for the determination of the thickness and elastic recovery of sleeping bags filled with feathers and/or down.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1949:2011/kFprA1:2012(Amendment)
Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles
EN 1949:2011/FprA1:2012

Same as EN 1949:2011

  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1949:2011/FprA1:2012(Amendment)
Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles
SIST EN 1949:2011/kFprA1:2012

Same as EN 1949:2011

  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 23537-2:2017(Main)
Requirements for sleeping bags - Part 2: Fabric and material properties (ISO 23537-2:2016)
EN ISO 23537-2:2016

This part of ISO 23537 specifies the fabric and material properties as well as provisions for labelling
of adult sized sleeping bags for use in sports and leisure time activities. Thermal and dimensional
requirements are specified in ISO 23537-1.
This part of ISO 23537 does not apply to sleeping bags intended for specific purpose such as military
use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies.
NOTE No prediction model exists for the determination of the limiting temperatures based on the thermal
resistance of the sleeping bag for children and babies. Moreover, such a model for testing cannot be developed
because the necessary controlled sleep trials with children or babies in climatic chambers are, out of ethical
reasons, not permitted.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 7152:2003(Main)
Camping tents and caravan awnings -- Vocabulary and list of equivalent terms
ISO 7152:1997

Contains a list of the most frequent terms relating to camping tents and caravan awnings together with some definitions. It also gives the relevant terms used in ISO 5912:1993, ISO 8936:1988 and ISO 8937:1991. Replaces the first edition.

  • Standard
    50 pages
    English language
    sale 15% off
  • Standard
    41 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23537-2:2016(Main)
Requirements for sleeping bags - Part 2: Fabric and material properties (ISO 23537-2:2016)
SIST EN ISO 23537-2:2017

ISO 23537-2:2016 specifies the fabric and material properties as well as provisions for labelling of adult sized sleeping bags for use in sports and leisure time activities. Thermal and dimensional requirements are specified in ISO 23537‑1.
ISO 23537-2:2016 does not apply to sleeping bags intended for specific purpose such as military use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies.
NOTE          No prediction model exists for the determination of the limiting temperatures based on the thermal resistance of the sleeping bag for children and babies. Moreover, such a model for testing cannot be developed because the necessary controlled sleep trials with children or babies in climatic chambers are, out of ethical reasons, not permitted.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 23537-1:2017/A1:2018(Amendment)
Requirements for sleeping bags - Part 1: Thermal and dimensional requirements - Amendment 1 (ISO 23537-1:2016/Amd1:2018)
EN ISO 23537-1:2016/A1:2018

2018-01-09 - TC decision is missing to skip Formal Vote. email sent to TC requesting TC decision on 2018-01-09. email saved on network (standards).
2018-01-10 - TC decision received to skip FV.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 23537-1:2017(Main)
Requirements for sleeping bags - Part 1: Thermal and dimensional requirements (ISO 23537-1:2016)
EN ISO 23537-1:2016

This part of ISO 23537 specifies the requirements and test methods as well as provisions for labelling of
adult sized sleeping bags for use in sports and leisure time activities.
This part of ISO 23537 does not apply to sleeping bags intended for specific purpose such as military
use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies.
NOTE 1 No prediction model exists for the determination of the limiting temperatures based on the thermal
resistance of the sleeping bag for children and babies. Moreover, such a model for testing cannot be developed
because the necessary controlled sleep trials with children or babies in climatic chambers are, out of ethical
reasons, not permitted.
NOTE 2 The limit temperature for extreme climate conditions is seen to be −20 °C.
This part of ISO 23537 describes the method for the assessment of the performance in steady-state
conditions of a sleeping bag with regard to the protection against cold.
NOTE 3 Sleeping bags without homogeneous fillings designed to provide local extra insulation in certain
parts pose issues with the calibration and/or test procedure. Ongoing work continues to provide suitable means
of establishing temperature ratings.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23537-1:2016/A1:2018(Amendment)
Requirements for sleeping bags - Part 1: Thermal and dimensional requirements - Amendment 1 (ISO 23537-1:2016/Amd 1:2018)
SIST EN ISO 23537-1:2017/A1:2018

2018-01-09 - TC decision is missing to skip Formal Vote. email sent to TC requesting TC decision on 2018-01-09. email saved on network (standards).
2018-01-10 - TC decision received to skip FV.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23537-1:2016(Main)
Requirements for sleeping bags - Part 1: Thermal and dimensional requirements (ISO 23537-1:2016)
SIST EN ISO 23537-1:2017

ISO 23537-1:2016 specifies the requirements and test methods as well as provisions for labelling of adult sized sleeping bags for use in sports and leisure time activities.
ISO 23537-1:2016 does not apply to sleeping bags intended for specific purpose such as military use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies.
NOTE 1       No prediction model exists for the determination of the limiting temperatures based on the thermal resistance of the sleeping bag for children and babies. Moreover, such a model for testing cannot be developed because the necessary controlled sleep trials with children or babies in climatic chambers are, out of ethical reasons, not permitted.
NOTE 2       The limit temperature for extreme climate conditions is seen to be −20 °C.
ISO 23537-1:2016 describes the method for the assessment of the performance in steady-state conditions of a sleeping bag with regard to the protection against cold.
NOTE 3       Sleeping bags without homogeneous fillings designed to provide local extra insulation in certain parts pose issues with the calibration and/or test procedure. Ongoing work continues to provide suitable means of establishing temperature ratings.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1949:2011+A1:2013(Main)
Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles
SIST EN 1949:2011+A1:2013

This European Standard specifies the requirements for the installation of liquefied petroleum gas systems for habitation purposes in leisure accommodation vehicles and for accommodation purposes in other vehicles. It details safety and health requirements on the selection of materials, components and appliances, on design considerations and tightness testing of installations and on the contents of the user's handbook.
This European Standard does not cover installations supplied from other than 3rd family gases (LPG), water connections or electrical power supplies to the appliance(s). Portable appliances, incorporating their own gas supply, are not considered part of the installation and are outside the scope of this standard. It does not include the installation of LPG appliances to be used for commercial purposes or for boats. Gas supply equipment and gas appliances separate from and external to the body of the vehicle are also not considered by this standard.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    37 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 60364-7-708:2009/A11:2017(Amendment)
Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations
HD 60364-7-708:2009/A11:2017
  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
HD 60364-7-708:2009/A11:2017(Amendment)
Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations
SIST HD 60364-7-708:2009/A11:2017
  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 60364-7-708:2009(Main)
Low-voltage electrical installations -- Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations
HD 60364-7-708:2009

The particular requirements contained in this part of IEC 60364 apply only to circuits intended to supply leisure accommodation vehicles, tents or residential park homes in caravan parks, camping parks and similar locations.

  • Standardization document
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standardization document
    12 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 5912:2011(Main)
Camping tents (ISO 5912:2011)
EN ISO 5912:2011

ISO 5912:2011 specifies requirements for safety, performance and fitness for use of camping tents (referred to as "tents" throughout).

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5912:2011(Main)
Camping tents (ISO 5912:2011)
SIST EN ISO 5912:2011

ISO 5912:2011 specifies requirements for safety, performance and fitness for use of camping tents (referred to as "tents" throughout).

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 23537-1:2016/Amd 1:2018(Amendment)
Requirements for sleeping bags — Part 1: Thermal and dimensional requirements — Amendment 1
  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
SIST
SIST EN 581-3:2007
Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 3: Mechanical safety requirements and test methods for tables
EN 581-3:2007

This European Standard specifies the mechanical safety requirements and test methods for outdoor tables used by adults for camping, domestic and contract use without regard to materials, design/construction or manufacturing processes. This standard excludes tables using glass in their construction.
This document does not apply to outdoor furniture for severe contract use where higher requirements may be necessary, nor does it apply to street furniture and furniture permanently fixed to the ground/wall.
Annex A (informative) specifies guidelines for purchase information.
Information regarding ageing and degradation caused by light, temperature and moisture has not been included.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
50