SIST EN 15330-2:2008

Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfaces

This European Standard specifies performance and durability characteristics of needle-punched sports surfaces primarily used outdoors. Two categories of surfaces are covered, based on the principal sporting use of the surface, as follows:
   surfaces designed for multi-sports use; and
   surfaces designed primarily for tennis.
The requirements are intended to apply to surfaces used for community, educational and recreational sport. For professional and elite levels of competition, many sports governing bodies have published their own specifications; the requirements of the sports governing bodies might differ from those detailed in this European Standard and facility developers are advised to ensure that they select surfaces offering the correct levels of performance for the levels of competition to be played on the pitch or court.
This European Standard is based on type approval testing of products in the laboratory. Selected requirements may also be used on-site to assess the suitability of installed surfaces. Guidance on the testing of installations is given in Annex A.

Sportböden - Überwiegend für den Außenbereich hergestellte Kunststoffrasenflächen und vernadelte Beläge - Teil 2: Festlegungen für Nadelfilze

Diese Europäische Norm legt die Leistungs  und Dauerhaftigkeitseigenschaften von Nadelfilzen für Sportböden fest, die üblicherweise im Außenbereich zur Verwendung gelangen. Es werden zwei Kategorien von Belägen behandelt, die auf der überwiegenden sportlichen Nutzung der Beläge basieren, und zwar:
   Nadelfilze, die für mehrere Sportarten konzipiert sind und
   Nadelfilze, die vorwiegend für Tennis konzipiert sind.
Die Anforderungen gelten für Beläge, die für den Breitensport und Schulsport vorgesehen sind. Für den Leistungssport haben viele Sportföderationen eigene Anforderungen veröffentlicht, die von den in dieser Europäischen Norm angegebenen abweichen können. Die Bauherren von Sportanlagen sollten sicherstellen, dass der gewählte Sportboden das richtige Leistungsniveau für die Wettkämpfe, die auf dem jeweiligen Sportplatz ausgetragen werden, sicherstellt.
Diese Europäische Norm basiert auf der Typprüfung von Produkten im Laboratorium. Bestimmte Anforderun¬gen können auch in situ geprüft werden, um die Eignung von eingebauten Sportböden zu beurteilen. Hinweise für die Prüfung von eingebauten Sportböden sind in Anhang A angegeben.

Sols sportifs - Surfaces en gazon synthétique et en textile aiguilleté principalement destinées a l'usage en extérieur - Partie 2 : Spécifications relatives aux surfaces en textile aiguilleté

La présente Norme européenne spécifie les caractéristiques de performance et de durabilité des sols sportifs en textile aiguilleté principalement utilisés à l’extérieur. Deux catégories de surfaces sont concernées, en fonction de l’usage sportif principal de la surface :
- surfaces multi-sports ; et
- surfaces principalement destinées au tennis.
Les exigences de la présente norme s’appliquent aux surfaces utilisées pour les sports collectifs, l’éducation physique ou les sports de loisirs. Au niveau du sport professionnel et de la compétition, plusieurs organismes sportifs ont publié leurs propres spécifications ; leurs exigences peuvent être différentes de celles énoncées dans la présente Norme européenne, et il est conseillé aux concepteurs d’installations de s’assurer qu’ils choisissent des surfaces offrant les niveaux de performance correspondant aux niveaux de compétition prévus sur le terrain ou sur le court. La présente Norme européenne est fondée sur des essais d’homologation de type de produits en laboratoire. Des exigences particulières peuvent également s’appliquer sur site, afin d’évaluer l’aptitude à l’emploi des surfaces installées. Des conseils concernant les essais d’installation sont donnés à l’Annexe A.

Podloge za športne dejavnosti - Umetne travnate podloge in iglane podloge predvsem za zunanjo uporabo - 2. del: Specifikacija za iglane podloge

General Information

• Status: Withdrawn
• Publication Date: 17-Feb-2008
• Withdrawal Date: 10-Aug-2017
• ICS: 97.220.10 - Sports facilities
• Technical Committee: SPO - Sports
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 11-Aug-2017
• Due Date: 03-Sep-2017
• Completion Date: 11-Aug-2017
• Ref Project: EN 15330-2:2008 - Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfaces

Relations

• Replaced By: SIST EN 15330-2:2017 - Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfaces for tennis and multi-sport surfaces
• Effective Date: 01-Sep-2017
• Parent: oSIST prEN 15330:2005 - Surfaces for sports areas - Synthetic turf surfaces primarily designed for outdoor use - Specification
• Effective Date: 22-Dec-2008
• Splited From: oSIST prEN 15330:2005 - Surfaces for sports areas - Synthetic turf surfaces primarily designed for outdoor use - Specification
• Effective Date: 07-Mar-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfacesPodloge za športne dejavnosti - Umetne travnate podloge in iglane podloge predvsem za zunanjo uporabo - 2. del: Specifikacija za iglane podlogeSols sportifs - Surfaces en gazon synthétique et en textile aiguilleté principalement destinées a l'usage en extérieur - Partie 2 : Spécifications relatives aux surfaces en textile aiguilletéSportböden - Überwiegend für den Außenbereich hergestellte Kunststoffrasenflächen und vernadelte Beläge - Teil 2: Festlegungen für NadelfilzeTa slovenski standard je istoveten z:EN 15330-2:2008SIST EN 15330-2:2008en,fr,de97.220.10ICS:SLOVENSKI
STANDARDSIST EN 15330-2:200801-april-2008







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15330-2January 2008ICS 97.220.10 English VersionSurfaces for sports areas - Synthetic turf and needle-punchedsurfaces primarily designed for outdoor use - Part 2:Specification for needle-punched surfacesSols sportifs - Surfaces en gazon synthétique et en textileaiguilleté principalement destinées à l'usage en extérieur -Partie 2 : Spécifications relatives aux surfaces en textileaiguilletéSportböden - Überwiegend für den Außenbereichhergestellte Kunststoffrasenflächen und Nadelfilze - Teil 2:Festlegungen für NadelfilzeThis European Standard was approved by CEN on 22 December 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15330-2:2008: E



EN 15330-2:2008 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.5 4 General.6 4.1 Resistance to artificial weathering.6 4.2 Water permeability.6 4.3 Joint strength.6 4.4 Abrasion resistance.6 4.5 Tensile properties of carpet.6 5 Surfaces designed for multi-sports use.6 5.1 General.6 5.2 Vertical ball rebound.7 5.3 Ball roll and velocity change.7 5.4 Shock absorption.7 5.5 Rotational Resistance.8 5.6 Angled ball behaviour.8 6 Surfaces designed primarily for tennis.8 6.1 General.8 6.2 Vertical ball rebound.8 6.3 Angled ball behaviour.8 6.4 Shock absorption.8 6.5 Rotational resistance.8 7 Information to be provided by the manufacturer or supplier.9 Annex A (informative)
Site tests.10 A.1 General.10 A.2 Multi-sports pitches.11 A.3 Tennis courts.12 Annex B (normative)
Preparation of wet test pieces.13 Annex C (informative)
Ball rebound.14 Annex D (normative)
Information to be supplied by the manufacturer or supplier regarding maintenance.15 Annex E (normative)
Product identification.16 Annex F (normative)
Surface regularity.17



EN 15330-2:2008 (E) 3 Foreword This document (EN 15330-2:2008) has been prepared by Technical Committee CEN/TC 217 “Surfaces for sports areas”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2008, and conflicting national standards shall be withdrawn at the latest by July 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. EN 15330 consists of the following parts, under the general title Surfaces for sports areas — Synthetic turf and needle-punched surfaces primarily designed for outdoor use:  Part 1: Specification for synthetic turf
 Part 2: Specification for needle-punched surfaces According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.



EN 15330-2:2008 (E) 4 1 Scope This European Standard specifies performance and durability characteristics of needle-punched sports surfaces primarily used outdoors. Two categories of surfaces are covered, based on the principal sporting use of the surface, as follows:  surfaces designed for multi-sports use; and  surfaces designed primarily for tennis. The requirements are intended to apply to surfaces used for community, educational and recreational sport. For professional and elite levels of competition, many sports governing bodies have published their own specifications; the requirements of the sports governing bodies might differ from those detailed in this European Standard and facility developers are advised to ensure that they select surfaces offering the correct levels of performance for the levels of competition to be played on the pitch or court. This European Standard is based on type approval testing of products in the laboratory. Selected requirements may also be used on-site to assess the suitability of installed surfaces. Guidance on the testing of installations is given in Annex A. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 430, Resilient floor coverings – Determination of mass per unit area EN 933-1, Tests for geometrical properties of aggregates – Part 1: Determination of particle size distribution – Sieving method EN 1097-3, Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids EN 1969, Surfaces for sports areas – Determination of thickness of synthetic sports surfaces EN 12616, Surfaces for sports areas – Determination of water infiltration rate EN 12230, Surfaces for sports areas – Determination of tensile properties of synthetic sports surfaces EN 12235, Surfaces for sports areas – Determination of vertical ball behaviour EN 12228, Surfaces for sports areas – Determination of joint strength of synthetic surfaces EN 12229, Surfaces for sports areas – Procedure for the preparation of synthetic turf and needle-punch test pieces EN 12234, Surfaces for sports areas – Determination of ball roll behaviour EN 13036-7, Road and airfield surface characteristics – Test methods – Part 7: Irregularity measurement of pavement courses: the straightedge test EN 13672, Surfaces for sports areas – Determination of resistance to abrasion of non-filled synthetic turf EN 13744, Surfaces for sports areas – Procedure for accelerated ageing by immersion in hot water



EN 15330-2:2008 (E) 5 EN 13865, Surfaces for sports areas – Determination of angled ball behaviour – Tennis
EN 14808, Surfaces for sports areas – Determination of shock absorption EN 14809, Surfaces for sports areas – Determination of vertical deformation EN 14836, Synthetic surfaces for outdoor sports areas - Exposure to artificial weathering EN 14955, Surfaces for sports areas – Determination of composition and particle shape of unbound mineral surfaces for outdoor sports areas EN 15301-1, Surfaces for sports areas – Part 1: Determination of rotational resistance EN 20105-A02, Textiles – Tests for colour fastness – Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993) EN ISO 5079, Textiles – Fibres - Determination of breaking force and elongation at break of individual fibres (ISO 5079:1995) EN ISO 13934-1, Textiles – Tensile properties of fabrics – Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:1999) ISO 1766, Textile floor coverings — Determination of thickness of pile above the substrate ISO 8543, Textile floor coverings — Methods for determination of mass ISO 11357-3, Plastics – Differential scanning calorimetry (DSC) – Part 3: Determination of temperat
...