SIST EN 6049-008:2014

Aerospace series - Electrical cables, installation - Protective sleeves in meta-aramid fibres - Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from -55 ˚C to 200 ˚C - Product standard

This European Standard specifies the characteristics of post installation flexible self-wrapping EMI shielding protection sleeves for electrical cable and cable bundles made from meta-aramid fibres for the external sleeve, and nickel copper plated braid as the internal layer and provided with a water repellent protection for aerospace application.

Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche aus Meta-Aramidfasern - Teil 008: Selbstverschliebender Schtuzschlauch, geschirmt (EMI), mit Nickel Kupfer Geflecht, flexibel, nachtraglich monteirbar temperaturbereich -55 ˚C bis 200 ˚C - Producktnorm

Diese Europäische Norm legt die Eigenschaften von nachträglich montierbaren Schutzschläuchen aus Meta-Aramidfasern, flexibel, selbstverschließend, geschirmt (EMI), mit einer Innenschicht aus Nickel-Kupfer-Geflecht und einer wasserabweisenden Schutzfunktion für elektrische Leitungen und Leitungsbündel zur Anwendung in der Luft- und Raumfahrt fest.

Série aérospatiale - Câbles électriques, installation - Gaines de protection en fibres méta-aramides - Partie 008: Gaine de protection Blindée (EMI) auto-fermable avec tresse cuivre nickelée, souple après montage température d'utilisation -55 ˚C à 200 ˚C - Norme de produit

La présente Norme Européenne définit les caractéristiques, après installation, des gaines de protection blindées EMI flexibles auto-fermables pour câble électrique ou toron de câbles fabriquées en fibres méta-aramides pour gaine externe, et de brins de cuivre nickelé comme couche interne et fournies une protection imperméable pour les applications aéronautiques.

Aeronavtika - Električni kabli, inštalacija - Zaščitne obojke iz meta-aramidnih vlaken - 008. del: Samoovojna zaslonjena (pred EMI) zaščitna obojka iz nikelj-bakrenih niti, zvijava, z možnostjo poznejše montaže, delovna temperatura od -55 °C do 200 °C - Standard za izdelek

General Information

• Status: Withdrawn
• Publication Date: 02-Jan-2014
• Withdrawal Date: 10-Dec-2017
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 11-Dec-2017
• Due Date: 03-Jan-2018
• Completion Date: 11-Dec-2017
• Ref Project: EN 6049-008:2013 - Aerospace series - Electrical cables, installation - Protective sleeves in meta-aramid fibres - Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from – 55 ˚C to 200 ˚C - Product standard

Relations

• Replaced By: SIST EN 6049-008:2018 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from - 55 °C to 200 °C - Product standard
• Effective Date: 21-Nov-2017
• Revised: SIST EN 6049-008:2018 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from - 55 °C to 200 °C - Product standard
• Effective Date: 08-Mar-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 6049-008:2014
01-februar-2014
$HURQDYWLND(OHNWULþQLNDEOLLQãWDODFLMD=DãþLWQHRERMNHL]PHWDDUDPLGQLK
YODNHQGHO6DPRRYRMQD]DVORQMHQDSUHG(0,]DãþLWQDRERMNDL]QLNHOM
EDNUHQLKQLWL]YLMDYD]PRåQRVWMRSR]QHMãHPRQWDåHGHORYQDWHPSHUDWXUDRGƒ
&GRƒ&6WDQGDUG]DL]GHOHN
$HURVSDFHVHULHV(OHFWULFDOFDEOHVLQVWDOODWLRQ3URWHFWLYHVOHHYHVLQPHWDDUDPLG
ILEUHV3DUW6HOIZUDSSLQJVKLHOGHG(0,SURWHFWLYHVOHHYHZLWKQLFNHOFRSSHUEUDLG
IOH[LEOHSRVWLQVWDOODWLRQRSHUDWLQJWHPSHUDWXUHIURPÛ&WRÛ&3URGXFWVWDQGDUG
/XIWXQG5DXPIDKUW(OHNWULVFKH/HLWXQJHQ,QVWDOODWLRQ6FKXW]VFKOlXFKHDXV0HWD
$UDPLGIDVHUQ7HLO6HOEVWYHUVFKOLHEHQGHU6FKWX]VFKODXFKJHVFKLUPW(0,PLW
1LFNHO.XSIHU*HIOHFKWIOH[LEHOQDFKWUDJOLFKPRQWHLUEDUWHPSHUDWXUEHUHLFKÛ&ELV
Û&3URGXFNWQRUP
6pULHDpURVSDWLDOH&kEOHVpOHFWULTXHVLQVWDOODWLRQ*DLQHVGHSURWHFWLRQHQILEUHVPpWD
DUDPLGHV3DUWLH*DLQHGHSURWHFWLRQ%OLQGpH(0,DXWRIHUPDEOHDYHFWUHVVH
FXLYUHQLFNHOpHVRXSOHDSUqVPRQWDJHWHPSpUDWXUHG
XWLOLVDWLRQÛ&jÛ&1RUPH
GHSURGXLW
Ta slovenski standard je istoveten z: EN 6049-008:2013
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 6049-008:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 6049-008:2014

---------------------- Page: 2 ----------------------

SIST EN 6049-008:2014


EUROPEAN STANDARD
EN 6049-008

NORME EUROPÉENNE

EUROPÄISCHE NORM
January 2013
ICS 49.060
English Version
Aerospace series - Electrical cables, installation - Protective
sleeves in meta-aramid fibres - Part 008: Self-wrapping shielded
(EMI) protective sleeve with nickel copper braid, flexible post
installation operating temperature from - 55 °C to 200 °C -
Product standard
Série aérospatiale - Câbles électriques, installation - Luft- und Raumfahrt - Elektrische Leitungen, Installation -
Gaines de protection en fibres méta-aramides - Partie 008: Schutzschläuche aus Meta-Aramidfasern - Teil 008:
Gaine de protection blindée (EMI) auto-fermable avec Selbstverschließender Schutzschlauch, geschirmt (EMI),
tresse cuivre nickelée, souple après montage température mit Nickel-Kupfer-Geflecht, flexibel, nachträglich
d'utilisation - 55 °C à 200 °C - Norme de produit montierbar, Betriebstemperatur -55 °C bis 200 °C -
Produktnorm
This European Standard was approved by CEN on 3 May 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 6049-008:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 6049-008:2014
EN 6049-008:2013 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .5
4 Required characteristics .5
5 Test methods .9
6 Designation . 12
7 Marking . 12

2

---------------------- Page: 4 ----------------------

SIST EN 6049-008:2014
EN 6049-008:2013 (E)
Foreword
This document (EN 6049-008:2013) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by July 2013, and conflicting national standards shall be withdrawn at the
latest by July 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 6049-008:2014
EN 6049-008:2013 (E)
1 Scope
This European Standard specifies the characteristics of post installation flexible self-wrapping EMI shielding
protection sleeves for electrical cable and cable bundles made from meta-aramid fibres for the external
sleeve, and nickel copper plated braid as the internal layer and provided with a water repellent protection for
aerospace application.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 2825, Aerospace series — Burning behaviour of non metallic materials under the influence of radiating

heat and flames — Determination of smoke density
EN 2826, Aerospace series — Burning behaviour of non metallic materials under the influence of radiating
heat and flames — Determination of gas components in the smoke
EN 2591-214, Aerospace series — Elements of electrical and optical connection — Test methods — Part 214:
Lightning strike, current and voltage pulse
EN 2591-305, Aerospace series — Elements of electrical and optical connection — Test methods — Part 305:
Rapid change of temperature
EN 2591-307, Aerospace series — Elements of electrical and optical connection — Test methods — Part 307:
Salt mist
EN 3475-301, Aerospace series — Cables, electrical, aircraft use — Test methods — Part 301: Ohmic
resistance per unit length
EN 3475-705, Aerospace series — Cables, electrical, aircraft use — Test methods — Part 705: Contrast
measurement
EN 3844-1, Aerospace series — Flammability of non metallic materials — Part 1: Small burner test, vertical —
Determination of the vertical flame propagation
EN 6049-001, Aerospace series — Electrical cables, installation — Protection sleeve in meta-aramid fibres —
1)
Part 001: Technical specification
EN 6059 (all parts), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods

1) Published as ASD-STAN Prestandard at the date of publication of this standard (www.asd-stan.org).
4

---------------------- Page: 6 ----------------------

SIST EN 6049-008:2014
EN 6049-008:2013 (E)
IEC 60096-0-1, Radio-frequency cables — Part 0: Guide to the design of detailed specifications — Section 1:
2)
Coaxial cables
3)
ASTM B355, Standard Specification for Nickel-Coated Soft or Annealed Copper Wire
ASTM D1000, Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and
3)
Electronic Applications
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 6049-001 and the following apply.
3.1
after ageing
the ageing is to be understood as the effect of environmental test(s) listed in section 5 on the product
perform
...