oSIST prEN 16261-3:2021

Pyrotechnic articles - Fireworks, Category F4 - Part 3: Test methods

This European Standard specifies test methods for fireworks which are classified in category F4

Pyrotechnische Gegenstände - Feuerwerkskörper, Kategorie F4 - Teil 3: Prüfverfahren

Dieses Dokument legt Prüfverfahren für Feuerwerkskörper der Kategorie F4 fest.

Articles pyrotechniques - Artifices de divertissement, Catégorie F4 - Partie 3: Méthodes d'essai

Le présent document spécifie des méthodes d’essai pour les artifices de divertissement de catégorie F4.

Pirotehnični izdelki - Ognjemet, kategorija F4 - 3. del: Preskusne metode

General Information

• Status: Not Published
• Public Enquiry End Date: 31-May-2021
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: IEKS - Explosives
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 10-May-2024
• Due Date: 15-May-2024
• Completion Date: 10-May-2024
• Directive: 2013/29/EU - Directive 2013/29/EU of the European Parliament and of the Council of 12 June 2013 on the harmonisation of the laws of the Member States relating to the making available on the market of pyrotechnic articles (recast)
• Mandate: M/416 - Standardization mandate assigned to CEN concerning pyrotechnic articles
• Ref Project: prEN 16261-3 - Pyrotechnic articles - Fireworks, Category F4 - Part 3: Test methods

Relations

• Revised: SIST EN 16261-3:2013 - Pyrotechnic articles - Fireworks, Category 4 - Part 3: Test methods
• Effective Date: 19-Jan-2023
• Revised: SIST EN 16261-3:2013 - Pyrotechnic articles - Fireworks, Category 4 - Part 3: Test methods
• Effective Date: 18-Jan-2023
• Revised: SIST EN 16261-3:2013 - Pyrotechnic articles - Fireworks, Category 4 - Part 3: Test methods
• Effective Date: 01-May-2021

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 16261-3:2021
01-maj-2021
Pirotehnični izdelki - Ognjemet, kategorija F4 - 3. del: Preskusne metode
Pyrotechnic articles - Fireworks, Category F4 - Part 3: Test methods
Pyrotechnische Gegenstände - Feuerwerkskörper, Kategorie F4 - Teil 3: Prüfverfahren
Articles pyrotechniques - Artifices de divertissement, Catégorie F4 - Partie 3: Méthodes
d'essai
Ta slovenski standard je istoveten z: prEN 16261-3
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
oSIST prEN 16261-3:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16261-3:2021

---------------------- Page: 2 ----------------------
oSIST prEN 16261-3:2021


DRAFT
EUROPEAN STANDARD
prEN 16261-3
NORME EUROPÉENNE

EUROPÄISCHE NORM

May 2021
ICS 71.100.30 Will supersede EN 16261-3:2012
English Version

Pyrotechnic articles - Fireworks, Category F4 - Part 3: Test
methods
Articles pyrotechniques - Artifices de divertissement, Pyrotechnische Gegenstände - Feuerwerkskörper,
Catégorie F4 - Partie 3: Méthodes d'essai Kategorie 4 - Teil 3: Prüfverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 212.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16261-3:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 16261-3:2021
prEN 16261-3:2021 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Test environment for functioning test . 5
4.1 General . 5
4.2 Wind measurement . 5
5 Apparatus . 5
6 Test methods . 9
6.1 Construction and stability . 9
6.1.1 Outer dimension of item . 9
6.1.2 Determination of calibre .
...