prEN 16261-3
(Main)Pyrotechnic articles - Fireworks, Category F4 - Part 3: Test methods
Pyrotechnic articles - Fireworks, Category F4 - Part 3: Test methods
This document specifies test methods for fireworks of category F4.
Pyrotechnische Gegenstände - Feuerwerkskörper, Kategorie 4 - Teil 3: Prüfverfahren
Dieses Dokument legt Prüfverfahren für Feuerwerkskörper der Kategorie F4 fest.
Articles pyrotechniques - Artifices de divertissement, Catégorie F4 - Partie 3: Méthodes d'essai
Le présent document spécifie des méthodes d’essai pour les artifices de divertissement de catégorie F4.
Pirotehnični izdelki - Ognjemet, kategorija F4 - 3. del: Preskusne metode
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2021
Pirotehnični izdelki - Ognjemet, kategorija F4 - 3. del: Preskusne metode
Pyrotechnic articles - Fireworks, Category F4 - Part 3: Test methods
Pyrotechnische Gegenstände - Feuerwerkskörper, Kategorie F4 - Teil 3: Prüfverfahren
Articles pyrotechniques - Artifices de divertissement, Catégorie F4 - Partie 3: Méthodes
d'essai
Ta slovenski standard je istoveten z: prEN 16261-3
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2021
ICS 71.100.30 Will supersede EN 16261-3:2012
English Version
Pyrotechnic articles - Fireworks, Category F4 - Part 3: Test
methods
Articles pyrotechniques - Artifices de divertissement, Pyrotechnische Gegenstände - Feuerwerkskörper,
Catégorie F4 - Partie 3: Méthodes d'essai Kategorie 4 - Teil 3: Prüfverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 212.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16261-3:2021 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Test environment for functioning test . 5
4.1 General . 5
4.2 Wind measurement . 5
5 Apparatus . 5
6 Test methods . 9
6.1 Construction and stability . 9
6.1.1 Outer dimension of item . 9
6.1.2 Determination of calibre . 10
6.1.3 Determination of gross mass . 10
6.2 Design – Verification . 10
6.3 Determination of tube angle . 10
6.3.1 Apparatus . 10
6.3.2 Procedure. 10
6.4 Angle of ascent and burst height . 11
6.4.1 General . 11
6.4.2 Dimensions of mortar . 11
6.4.3 Support of mortar . 11
6.5 Measurement of sound pressure level . 11
6.5.1 Apparatus . 11
6.5.2 Procedure. 11
6.6 Extinguishing of flames . 11
6.6.1 Apparatus . 11
6.6.2 Procedure. 11
6.7 Visual and audible inspections . 12
6.8 Mechanical conditioning . 12
6.8.1 Apparatus . 12
6.8.2 Procedure. 12
6.9 Thermal conditioning . 12
6.9.1 Apparatus . 12
6.9.2 Procedure. 12
6.10 Function test . 12
6.10.1 Apparatus . 12
6.10.2 Procedure. 13
6.10.3 Monitoring of effect, rising/bursting and drop height . 13
6.10.4 Monitoring of effect range and effect dimensions of aquatic fireworks . 14
6.11 Measuring of CE-marking . 14
6.11.1 Apparatus . 14
6.11.2 Procedure. 14
6.12 Use of detonative explosives . 14
6.12.1 General . 14
6.12.2 Test Method A . 14
6.12.3 Test method B . 15
Annex A (informative) Mechanical conditioning (Shock Apparatus) . 18
Annex B (informative) Procedures for calculation of heights . 21
Annex C (informative) Calculation method for safety-/protection distance . 25
Annex ZA (informative) Relationship between this European Standard and the essential
safety requirements of Directive 2013/29/EU aimed to be covered . 26
Bibliography . 28
European foreword
This document (prEN 16261-3:2021) has been prepared by Technical Committee CEN/TC 212
“Pyrotechnic articles”, the secretariat of which is held by NEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 16261-3:2012.
In comparison with the previous edition, the following technical modifications have been made:
— Addition of balances with different accuracies to clause 5.6;
— Clause 6.10.3 has been technically revised;
— A clause 6.12 on the use of detonative explosives has been added.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of Directive 2013/29/EU on the
harmonisation of the laws of the Member States relating to the making available on the market of
pyrotechnic articles.
For relationship with Directive 2013/29/EU, see informative Annex ZA, which is an integral part of this
document.
1 Scope
This document specifies test methods for fireworks of category F4.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 16261-1:—, Pyrotechnic articles - Fireworks, category F4 - Part 1: Terminology
EN 16261-2:—, Pyrotechnic articles — Fireworks, Category F4 — Part 2: Requirements
EN 61672-1, Electroacoustics - Sound level meters - Part 1: Specifications (IEC 61672 1)
ISO 13385-1:2019, Geometrical product specifications (GPS) — Dimensional measuring equipment —
Part 1: Design and metrological characteristics of callipers
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 16261-1:— apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at https://www.electropedia.org/
— ISO Online browsing platform: available at https://www.iso.org/obp
4 Test environment for functioning test
4.1 General
A large unobstructed area, which shall be wide open. The measuring points shall be positioned
appropriately for the type of measurement being carried out.
For aquatic fireworks, a water test area shall be available for testing the resistance to moisture and
functioning in the expected manner.
4.2 Wind measurement
The wind speed at a height of 1,50 m above the ground shall be measured and recorded using a wind
speed meter (see 5.5). No performance testing shall be carried out if the wind speed exceeds 5,0 m/s.
5 Apparatus
Any equivalent apparatus with the same accuracy or better may be used.
5.1 Timing device, capable of being read to the nearest 0,1 s.
5.2 Calliper, flat faced vernier reading to 0,1 mm, which shall conform to ISO 13385-1:2019.
Under preparation. Stage at the time of publication: prEN 16261-1:2021.
Under preparation. Stage at the time of publication: prEN 16261-2:2021.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.