SIST EN 6049-005:2015

Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 005: Sleeve flexible, post installation - Product standard

This European Standard defines the characteristics of post installation flexible mechanical protection sleeves
for electrical cable and cable bundles made from meta-aramid fibres and provided with a water repelled
protection.

Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche aus Meta-Aramidfasern - Teil 005: Biegsame Schutzschläuche Nachträglicher Einbau - Produktnorm

Diese Europäische Norm legt die Eigenschaften von nachträglich montierbaren flexiblen Schutzschläuchen aus Meta Aramidfasern mit einer wasserabweisenden Schutzschicht als mechanischen Schutz für elektrische Leitungen und Leitungsbündel fest.

Série aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-aramides - Partie 005: Gaine de protection souple à installer au montage - Norme de produit

Aeronavtika - Električni kabli, namestitev - Zaščitna obojka iz meta-aramidnih vlaken - 005. del: Upogljiva obojka z možnostjo poznejše montaže - Standard za proizvod

Ta evropski standard določa značilnosti upogljivih mehanskih zaščitnih obojk z možnostjo poznejše montaže za električne kable in svežnje kablov, ki so izdelane iz meta-aramidnih vlaken in imajo vodoodbojno zaščito.

General Information

• Status: Published
• Public Enquiry End Date: 19-May-2014
• Publication Date: 18-Jan-2015
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 06-Jan-2015
• Due Date: 13-Mar-2015
• Completion Date: 19-Jan-2015
• Ref Project: EN 6049-005:2014 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 005: Sleeve flexible, post installation - Product standard

Relations

• Revised: oSIST prEN 6049-005:2023 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 005: Sleeve flexible, post installation - Product standard
• Effective Date: 05-Apr-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 6049-005:2015
01-februar-2015
$HURQDYWLND(OHNWULþQLNDEOLQDPHVWLWHY=DãþLWQDRERMNDL]PHWDDUDPLGQLK
YODNHQGHO8SRJOMLYDRERMND]PRåQRVWMRSR]QHMãHPRQWDåH6WDQGDUG]D
SURL]YRG
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres
- Part 005: Sleeve flexible, post installation - Product standard
Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche aus Meta-
Aramidfasern - Teil 005: Biegsame Schutzschläuche Nachträglicher Einbau -
Produktnorm
Série aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-
aramides - Partie 005: Gaine de protection souple à installer au montage - Norme de
produit
Ta slovenski standard je istoveten z: EN 6049-005:2014
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 6049-005:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 6049-005:2015

---------------------- Page: 2 ----------------------

SIST EN 6049-005:2015

EUROPEAN STANDARD
EN 6049-005

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2014
ICS 49.060
English Version
Aerospace series - Electrical cables, installation - Protection
sleeve in meta-aramid fibres - Part 005: Sleeve flexible, post
installation - Product standard
Série aérospatiale - Câbles électriques, installation - Gaine Luft- und Raumfahrt - Elektrische Leitungen, Installation -
de protection en fibres méta-aramides - Partie 005: Gaine Schutzschläuche aus Meta-Aramidfasern - Teil 005:
de protection souple à installer au montage - Norme de Schutzschlauch, flexibel, nachträglich montierbar -
produit Produktnorm
This European Standard was approved by CEN on 21 June 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 6049-005:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 6049-005:2015
EN 6049-005:2014 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Requirements .4
4.1 Composition and mass .4
4.2 Colour and materials .5
4.3 Mechanical properties .6
5 Test methods .6
6 Designation .7
7 Marking .7
8 Technical specification .7

2

---------------------- Page: 4 ----------------------

SIST EN 6049-005:2015
EN 6049-005:2014 (E)
Foreword
This document (EN 6049-005:2014) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2015, and conflicting national standards shall be withdrawn at
the latest by June 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, B
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HWDDUDPLGQLKSURL]YRGLuft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche aus Meta-Aramidfasern - Teil 005: Biegsame Schutzschläuche Nachträglicher Einbau - ProduktnormSérie aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-aramides - Partie 005: Gaine de protection souple à installer au montage - Norme de produitAerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 005: Sleeve flexible, post installation - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:FprEN 6049-005kSIST FprEN 6049-005:2014en,fr,de01-maj-2014kSIST FprEN 6049-005:2014SLOVENSKI
STANDARD



kSIST FprEN 6049-005:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 6049-005
March 2014 ICS
English Version
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 005: Sleeve flexible, post installation - Product standard
Série aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-aramides - Partie 005: Gaine de protection souple à installer au montage - Norme de produit
Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche aus Meta-Aramidfasern - Teil 005: Biegsame Schutzschläuche Nachträglicher Einbau - Produktnorm This draft European Standard is submitted to CEN members for formal vote. It has been drawn up by the Technical Committee ASD-STAN. If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 6049-005:2014 EkSIST FprEN 6049-005:2014



FprEN 6049-005:2014 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Requirements .4 4.1 Composition and mass .4 4.1.1 Composition of the tows .4 4.1.2 Composition, dimensions and mass of the sleeve .4 4.2 Colour and materials .5 4.2.1 Colour .5 4.2.2 Materials .6 4.3 Mechanical properties .6 4.3.1 Temperature range .6 4.3.2 Sun light exposure.6 4.3.3 Bending properties .6 4.3.4 Locking of the closing system .6 4.3.5 Resistance to fluids .6 4.3.6 Water absorption .6 4.3.7 Mould growth .6 4.3.8 Tensile strength of tows .6 5 Test methods .6 6 Designation .
...