SIST EN 6049-005:2025
(Main)Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 005: Sleeve flexible, post installation - Product standard
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 005: Sleeve flexible, post installation - Product standard
This document specifies the characteristics of post installation flexible mechanical protection sleeves for electrical cable and cable bundles made from meta-aramid fibres and provided with a water repellent protection.
Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche aus Meta-Aramidfasern - Teil 005: Biegsame Schutzschläuche Nachträglicher Einbau - Produktnorm
No Scope available
Série aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-aramides - Partie 005 : Gaine de protection souple à installer après montage - Norme de produit
Le présent document spécifie les caractéristiques des gaines de protection mécanique souples à installer au montage, pour câbles électriques et torons de câbles, en fibres méta-aramides et dotées d'une protection imperméable.
Aeronavtika - Električni kabli, namestitev - Zaščitna obojka iz meta-aramidnih vlaken - 005. del: Upogljiva obojka z možnostjo poznejše montaže - Standard za proizvod
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2025
Aeronavtika - Električni kabli, namestitev - Zaščitna obojka iz meta-aramidnih
vlaken - 005. del: Upogljiva obojka z možnostjo poznejše montaže - Standard za
proizvod
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres
- Part 005: Sleeve flexible, post installation - Product standard
Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche aus Meta-
Aramidfasern - Teil 005: Biegsame Schutzschläuche Nachträglicher Einbau -
Produktnorm
Série aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-
aramides - Partie 005 : Gaine de protection souple à installer après montage - Norme de
produit
Ta slovenski standard je istoveten z: EN 6049-005:2024
ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 6049-005
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2024
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 6049-005:2014
English Version
Aerospace series - Electrical cables, installation -
Protection sleeve in meta-aramid fibres - Part 005: Sleeve
flexible, post installation - Product standard
Série aérospatiale - Câbles électriques, installation - Luft- und Raumfahrt - Elektrische Leitungen,
Gaine de protection en fibres méta-aramides - Partie Installation - Schutzschläuche aus Meta-Aramidfasern -
005 : Gaine souple, après montage - Norme de produit Teil 005: Biegsame Schutzschläuche Nachträglicher
Einbau - Produktnorm
This European Standard was approved by CEN on 24 June 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 6049-005:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Requirements . 5
4.1 Composition and mass . 5
4.1.1 Composition of the tows . 5
4.1.2 Composition, dimensions and mass of the sleeve . 5
4.2 Colour and materials . 7
4.2.1 Colour . 7
4.2.2 Materials . 7
4.3 Mechanical properties . 7
4.3.1 Temperature range . 7
4.3.2 Sun light exposure . 7
4.3.3 Bending properties . 7
4.3.4 Locking of the closing system . 7
4.3.5 Resistance to fluids . 7
4.3.6 Water absorption . 7
4.3.7 Mould growth . 8
4.3.8 Tensile strength of fibres . 8
5 Test methods . 8
6 Designation . 9
7 Marking . 9
8 Technical specification . 9
European foreword
This document (EN 6049-005:2024) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by June 2025, and conflicting national standards shall be withdrawn at
the latest by June 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 6049-005:2014.
The main changes with respect to the previous edition are as follows:
— EN 6049-005 (P2), 12/2014 — Update of Clause 2 “Normative references” Correction of Figure 1
and its keys. Update of abrasion test system, tensile values, tensile expectations after ageing and
mass in Table 2 “Test methods details”.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this document: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
1 Scope
This document specifies the characteristics of post installation flexible mechanical protection sleeves
for electrical cable and cable bundles made from meta-aramid fibres and provided with a water
repellent protection.
2 Normative references
The following documents are referred to in the text i
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.