SIST EN 2854-003:2009
(Main)Aerospace series - Cables, electrical for general purpose - Cross sections equal to and greater than 9 mm2 - Operating temperatures between - 55 °C and 260 °C - Part 003: Product standard
Aerospace series - Cables, electrical for general purpose - Cross sections equal to and greater than 9 mm2 - Operating temperatures between - 55 °C and 260 °C - Part 003: Product standard
This standard specifies the characteristics of electrical cables for use in the on-board electrical systems of aircraft at operating temperatures between - 55 °C and 260 °C for cross sections equal to and greater than 9 mm2.
Luft- und Raumfahrt - Elektrische Leitungen für allgemeine Verwendung - Querschnitte 9 mm² und größer - Betriebstemperaturen zwischen - 55 °C und 260 °C - Teil 003: Produktnorm
Diese Norm legt die Eigenschaften von elektrischen Leitungen fest, die zur Verwendung in Bordnetzen von Luftfahrzeugen bei Betriebstemperaturen zwischen -55 °C und 260 °C und für Querschnitte größer oder gleich 9 mm2 bestimmt sind.
Série aérospatiale - Câbles électriques d'usage général - Sections supérieures ou égales à 9 mm² - Températures de fonctionnement comprises entre - 55 °C et 260 °C - Partie 003: Norme de produit
Aeronavtika - Električni kabli za splošno uporabo - Prerez enak ali večji od 9 mm2 - Delovne temperature med -55 °C in 260 °C - 003. del: Standard za proizvod
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SURL]YRGLuft- und Raumfahrt - Elektrische Leitungen für allgemeine Verwendung - Querschnitte 9 mm² und größer - Betriebstemperaturen zwischen - 55 °C und 260 °C - Teil 003: ProduktnormSérie aérospatiale - Câbles électriques d'usage général - Sections supérieures ou égales à 9 mm² - Températures de fonctionnement comprises entre - 55 °C et 260 °C - Partie 003: Norme de produitAerospace series - Cables, electrical for general purpose - Cross sections equal to and greater than 9 mm2 - Operating temperatures between - 55 °C and 260 °C - Part 003: Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2854-003:2009SIST EN 2854-003:2009en01-maj-2009SIST EN 2854-003:2009SLOVENSKI
STANDARD
SIST EN 2854-003:2009
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2854-003
February 2009 ICS 49.060 English Version
Aerospace series - Cables, electrical for general purpose - Cross sections equal to and greater than 9 mm² - Operating temperatures between - 55 °C and 260 °C - Part 003: Product standard
Série aérospatiale - Câbles électriques d'usage général - Sections supérieures ou égales à 9 mm² - Températures defonctionnement comprises entre - 55 °C et 260 °C - Partie 003 : Norme de produit
Luft- und Raumfahrt - Elektrische Leitungen für allgemeine Verwendung - Querschnitte 9 mm² und größer - Betriebstemperaturen zwischen - 55 °C und 260 °C - Teil 003: Produktnorm This European Standard was approved by CEN on 4 July 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2854-003:2009: ESIST EN 2854-003:2009
EN 2854-003:2009 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .44Materials and construction .44.1Materials .44.2Construction .54.3Number of cores .54.4Colour coding of cores .55Required characteristics .56Quality assurance .87Designation .87.1Identification .87.2Type code (for short designation) .88Identification and marking .89Packaging, labelling and delivery lengths .810Technical specification .8 SIST EN 2854-003:2009
EN 2854-003:2009 (E) 3 Foreword This document (EN 2854-003:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2009, and conflicting national standards shall be withdrawn at the latest by August 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.