SIST EN 4056-003:2016
(Main)Aerospace series - Cable ties for harnesses - Part 003: Plastic cable ties - Operating temperatures -65 °C to 105 °C and -65 °C to 150 °C - Product standard
Aerospace series - Cable ties for harnesses - Part 003: Plastic cable ties - Operating temperatures -65 °C to 105 °C and -65 °C to 150 °C - Product standard
This standard defines the required characteristics of cable ties with either internal or external serrations manufactured entirely from plastics material, for installation under controlled tension on aircraft cable harnesses.
It shall be used together with EN 4056-001.
Luft- und Raumfahrt - Befestigungsbänder für Leitungsbündel - Teil 003: Befestigungsbänder aus Kunststoff - Betriebstemperatur -65 °C bis 105 °C und -65 °C bis 150 °C - Produktnorm
Série aérospatiale - Frettes de câblage pour harnais - Partie 003: Frettes en plastique - Températures d’utilisation -65 °C à 105 °C et -65 °C à 150 °C - Norme de produit
Aeronavtika - Kabelske spojke za vezalno pasovje - 003. del: Plastične vezice - Delovne temperature med –65 °C do 105 °C in –65 °C do 150 °C - Standard za proizvod
Ta standard določa zahtevane lastnosti kabelskih spojk z notranjo ali zunanjo nazobčanostjo, v celoti proizvedenih iz plastike, za vgradnjo med nadzorovano napetostjo v letalsko vezalno pasovje.
Uporabljati ga je treba s standardom EN 4056-001.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 4056-003:2016
01-november-2016
$HURQDYWLND.DEHOVNHVSRMNH]DYH]DOQRSDVRYMHGHO 3ODVWLþQHYH]LFH
'HORYQHWHPSHUDWXUHPHG±ƒ&GRƒ&LQ±ƒ&GRƒ&6WDQGDUG]D
SURL]YRG
Aerospace series - Cable ties for harnesses - Part 003: Plastic cable ties - Operating
temperatures -65 °C to 105 °C and -65 °C to 150 °C - Product standard
Luft- und Raumfahrt - Befestigungsbänder für Leitungsbündel - Teil 003:
Befestigungsbänder aus Kunststoff - Betriebstemperatur -65 °C bis 105 °C und -65 °C
bis 150 °C - Produktnorm
Série aérospatiale - Frettes de câblage pour harnais - Partie 003: Frettes en plastique -
Températures d’utilisation -65 °C à 105 °C et -65 °C à 150 °C - Norme de produit
Ta slovenski standard je istoveten z: EN 4056-003:2016
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 4056-003:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 4056-003:2016
---------------------- Page: 2 ----------------------
SIST EN 4056-003:2016
EN 4056-003
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2016
EUROPÄISCHE NORM
ICS 49.060
English Version
Aerospace series - Cable ties for harnesses - Part 003:
Plastic cable ties - Operating temperatures -65 °C to 105 °C
and -65 °C to 150 °C - Product standard
Série aérospatiale - Frettes de câblage pour harnais - Luft- und Raumfahrt - Befestigungsbänder für
Partie 003: Frettes en plastique - Températures Leitungsbündel - Teil 003: Kabelbinder aus Kunststoff -
d'utilisation -65 °C à 105 °C et -65 °C à 150 °C - Norme Betriebstemperatur -65 °C bis 105 °C und -65 °C bis
de produit 150 °C - Produktnorm
This European Standard was approved by CEN on 2 January 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4056-003:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 4056-003:2016
EN 4056-003:2016 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
5 Tests and requirements . 7
6 Quality assurance . 8
7 Designation. 8
8 Marking . 8
9 Packaging and storage . 8
2
---------------------- Page: 4 ----------------------
SIST EN 4056-003:2016
EN 4056-003:2016 (E)
European foreword
This document (EN 4056-003:2016) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2017, and conflicting national standards shall
be withdrawn at the latest by March 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 4056-003:2016
EN 4056-003:2016 (E)
1 Scope
This European Standard defines the required characteristics of cable ties with either internal or
external serrations manufactured entirely from plastics material, for installation under controlled
tension on aircraft cable harnesses.
It shall be used together with EN 4056-001.
2 Normative references
The following documents, in whole or in par
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SURL]YRGLuft- und Raumfahrt - Befestigungsbänder für Leitungsbündel - Teil 003: Befestigungsbänder aus Kunststoff -
Betriebstemperatur -65 °C bis 105 °C und -65 °C bis 150 °C - ProduktnormSérie aérospatiale - Frettes de câblage pour harnais - Partie 003: Frettes en plastique -
Températures d’utilisation -65 °C à 105 °C et -65 °C à 150 °C - Norme de produitAerospace series - Cable ties for harnesses - Part 003: Plastic cable ties - Operating temperatures -65 °C to 105 °C and -65 °C to 150 °C - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:FprEN 4056-003kSIST FprEN 4056-003:2015en,fr,de01-november-2015kSIST FprEN 4056-003:2015SLOVENSKI
STANDARD
kSIST FprEN 4056-003:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 4056-003
October
t r s w ICS
English Version
Aerospace series æ Cable ties for harnesses æ Part
r r uã Plastic cable ties æ Operating temperatures æ x w
¹C to
s r w
¹C and æ x w
¹C to
s w r
¹C æ Product standard Série aérospatiale æ Frettes de câblage pour harnais æ Partie
r r uã Frettes en plastique æ
Températures d 5utilisation æ x w
¹C à
s r w
¹C et æ x w
¹C à
s w r
¹C æ Norme de produit
Luftæ und Raumfahrt æ Befestigungsbänder für Leitungsbündel æ Teil
r r uã Befestigungsbänder aus Kunststoff æ
Betriebstemperatur æ x w
¹C bis
s r w
¹C und æ x w
¹C bis
s w r
¹C æ Produktnorm This draft European Standard is submitted to CEN members for formal voteä It has been drawn up by the Technical Committee ASDæSTANä
If this draft becomes a European Standardá CEN members are bounwhich stipulate the conditions for giving this European Standard the status of a national standard without any alterationä
This draft European Standard was established by CEN in three ofer language made by translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
Recipients of this draft are invited to submitá with their commentsá notification of any relevant patent rights of which they are aware and to provide supporting documentationä
Warning ã This document is not a European Standardä It is distributed for review and commentsä It is subject to change without notice and shall not be referred to as a European Standardä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s w CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä FprEN
v r w xæ r r uã t r s w EkSIST FprEN 4056-003:2015
FprEN 4056-003:2015 (E) 2 Contents
Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Required characteristics . 4 5 Tests and requirements . 7 6 Quality assurance . 8 7 Designation. 8 8 Marking . 8 9 Packaging and storage . 8
kSIST FprEN 4056-003:2015
FprEN 4056-003:2015 (E) 3 European foreword This document (FprEN 4056-003:2015) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this European Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This document is currently submitted to the Formal Vote. kSIST FprEN 4056-003:2015
FprEN 4056-003:2015 (E) 4 1 Scope This European standard defines the required characteristics of cable ties with either internal or external serrations manufactured entirely from plastics material, for installation under controlled tension on aircraft cable harnesses. It shall be used together with EN 4056-001. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2825, Aerospace series — Burning behaviour of non metallic materials under the influence of radiating heat and flames — Determinati
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.