iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 73:2020+A1:2024

(Main + Amendment)

Durability of wood and wood-based products - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure

Durability of wood and wood-based products - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure

This document specifies an evaporative ageing procedure, applicable to test specimens of wood and wood-based products which are subsequently subjected to biological tests.
NOTE   The method can also be used for pre-conditioning of untreated wood, modified wood and wood-based panel products, whether they received preservative treatment or not.

Dauerhaftigkeit von Holz und Holzprodukten - Beschleunigte Alterung von behandeltem Holz vor biologischen Prüfungen - Verdunstungsbeanspruchung

Dieses Dokument legt ein Verfahren zur Verdunstungsbeanspruchung fest, das für Prüfkörper aus Holz oder Holzprodukten anwendbar ist, die anschließend biologischen Prüfungen unterzogen werden.
ANMERKUNG   Dieses Verfahren kann auch zur Vorbehandlung von unbehandeltem Holz, modifiziertem Holz und Holzwerkstoff-Produkten mit oder ohne Zusatz von Holzschutzmitteln verwendet werden.

Durabilité du bois et des produits dérivés - Épreuves de vieillissement accéléré des bois traités avant essais biologiques - Épreuve d'évaporation

Trajnost lesa in lesnih proizvodov - Pospešeno staranje zaščitenega lesa pred biološkim preskušanjem - Postopek izparevanja (vključno z dopolnilom A1)

General Information

Status
Published
Publication Date
16-Apr-2024
ICS
71.100.50 - Wood-protecting chemicals
Technical Committee
LLZ - Les, lesni izdelki in zaščita lesa
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
08-Apr-2024
Due Date
13-Jun-2024
Completion Date
17-Apr-2024
Ref Project
EN 73:2020+A1:2024 - Durability of wood and wood-based products - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure

Relations

Merged From
SIST EN 73:2020/oprA1:2023 - Durability of wood and wood-based products - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure
Effective Date
06-Dec-2023
Merged From
SIST EN 73:2020 - Durability of wood and wood-based products - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure
Effective Date
06-Dec-2023

Buy Standard

EN 73:2020+A1:2024EN 73:2020+A1:2024
PreviousNext
Standard
EN 73:2020+A1:2024
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 73:2020+A1:2024
01-junij-2024
Trajnost lesa in lesnih proizvodov - Pospešeno staranje zaščitenega lesa pred
biološkim preskušanjem - Postopek izparevanja (vključno z dopolnilom A1)
Durability of wood and wood-based products - Accelerated ageing of treated wood prior
to biological testing - Evaporative ageing procedure
Dauerhaftigkeit von Holz und Holzprodukten - Beschleunigte Alterung von behandeltem
Holz vor biologischen Prüfungen - Verdunstungsbeanspruchung
Durabilité du bois et des produits dérivés - Épreuves de vieillissement accéléré des bois
traités avant essais biologiques - Épreuve d'évaporation
Ta slovenski standard je istoveten z: EN 73:2020+A1:2024
ICS:
71.100.50 Kemikalije za zaščito lesa Wood-protecting chemicals
SIST EN 73:2020+A1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 73:2020+A1:2024

---------------------- Page: 2 ----------------------
SIST EN 73:2020+A1:2024


EN 73:2020+A1
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2024
EUROPÄISCHE NORM
ICS 71.100.50 Supersedes EN 73:2020
English Version

Durability of wood and wood-based products - Accelerated
ageing of treated wood prior to biological testing -
Evaporative ageing procedure
Durabilité du bois et des produits dérivés - Épreuves Dauerhaftigkeit von Holz und Holzprodukten -
de vieillissement accéléré des bois traités avant essais Beschleunigte Alterung von behandeltem Holz vor
biologiques - Épreuve d'évaporation biologischen Prüfungen - Verdunstungsbeanspruchung
This European Standard was approved by CEN on 24 February 2020 and includes Amendment approved by CEN on 18
December 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 73:2020+A1:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 73:2020+A1:2024
EN 73:2020+A1:2024 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 5
5 Equipment . 5
6 Test specimens . 6
6.1 Definition and origin . 6
6.2 Number of test specimens . 6
7 Procedure.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 370:2024(Main)
Wood preservatives - Determination of eradicant efficacy in preventing emergence of Anobium punctatum (De Geer)
EN 370:2023

This document specifies a method for the determination of the curative action of a wood preservative
against infestation by Anobium punctatum (De Geer) when the product is applied as a surface treatment
to wood.
This method is applicable to any surface-applied treatment that is intended to prevent emergence of adult
beetles but not intended to kill larvae in infested timber.
NOTE 1 This method can be used in conjunction with an ageing procedure, for example EN 73.
NOTE 2 Products intended to kill larvae can be tested by the method described in EN 48.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 20-1:2024(Main)
Wood preservatives - Determination of the protective effectiveness against Lyctus brunneus (Stephens) - Part 1: Application by surface treatment (laboratory method)
EN 20-1:2023

This part of the EN 20 series specifies a method for the determination of the protective effectiveness or
the toxic values of a wood preservative against infection by Lyctus brunneus (Stephens) when the product
is applied as a surface treatment to wood.
This method is applicable to:
— water-insoluble chemicals which are being studied as active insecticides; or
— organic formulsation, as supplied or as prepared in the laboratory by dilution of concentrates; or
— organic water-dispersible formulations as supplied or as prepared in the laboratory by dilution of
concentrates; or
— water-based preservatives, for example salts.
NOTE This method can be used in conjuction with ageing procedures, which do not remove the added nutrient.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 20-2:2024(Main)
Wood preservatives - Determination of the protective effectiveness against Lyctus brunneus (Stephens) - Part 2: Application by impregnation (Laboratory method)
EN 20-2:2023

This part of the EN 20 series specifies a method for the determination of the protective effectiveness or
the toxic values of a wood preservative against infection by Lyctus brunneus (Stephens) in wood which
has been treated previously by full impregantion.
This method is applicable to:
— water-insoluble chemicals which are being studied as active insecticides; or
— organic formulsation, as supplied or as prepared in the laboratory by dilution of concentrates.
This method is applicable to water-based preservatives.
NOTE This method can be used in conjuction with ageing procedures, which do not remove the added nutrient.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 117:2024(Main)
Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method)
EN 117:2023

This document specifies a method for the determination of the toxic values of a wood preservative against
the Reticulitermes species of European termites.
NOTE 1 The method can be applied not only to different species of Reticulitermes, but also to other species of
the family of the Rhinotermitidae, adapting the conditions of temperature and humidity where necessary to the
specific requirements of the species concerned.
This method is applicable to:
— water-insoluble chemicals which are being studied as active insecticides;
— organic water-dispersible formulations as supplied or as prepared in the laboratory by dilution of
concentrates;
— water-soluble materials, for example salts.
NOTE 2 This method can be used in conjunction with an ageing procedure, for example EN 73 or EN 84.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 351-1:2023(Main)
Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention
EN 351-1:2023

This part of EN 351 establishes a classification of preservative-treated wood in terms of preservative penetration and gives guidance on a classification of retention. These shall be used as a basis for specifying preservative treatments for particular products.
This part of EN 351 provides terminology to be used by the specifier when preparing a preservative treatment specification or product standard. It is not a treatment specification in itself.
This part of EN 351 is applicable to the production of preservative-treated solid wood, including glued laminated timber, suitable for use in those service conditions defined by the use classes in EN 335. It does not apply to any subsequent examination of treated wood in service.
This part of EN 351 is applicable to the protection of wood against attack by wood-destroying and wood-disfiguring fungi, insects and marine organisms.
NOTE   Protection against wood-disfiguring fungi is an optional property verified by testing in accordance with EN 599-1.
This part of EN 351 does not consider other properties of treated wood, for example odour, compatibility with other materials, such as corrosivity of fasteners. Nor does it consider any properties from the health, safety and environmental point of view.
This part of EN 351 does not apply to wood to be treated with formulations which are applied to timber in service to eliminate or control an existing fungal or insect infestation, or the prevention of attack by sapstain fungi, or insects in green timber.
Annex A (informatives) provides a decision process for defining preservative treatment requirements.
Annex B (informative) gives an example of the marking system.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 351-2:2023(Main)
Durability of wood and wood-based products - Preservative-treated solid wood - Part 2: Guidance on sampling for the analysis of preservative-treated wood
EN 351-2:2023

This part of EN 351 gives guidance on the general procedures to be used in obtaining samples of preservative-treated wood for the determination of penetration and retention of wood preservative. It also gives guidance on how to measure the penetration and retention of a wood preservative in the treated wood.
This part of EN 351 is applicable to the production of preservative-treated solid wood, including glued laminated timber, suitable for use in those service conditions defined by the use classes in EN 335.
This part of EN 351 is not applicable to preservative-treated wood in service. However, the sampling guidance provided within this part of EN 351 may be applied for the subsequent examination of treated wood in service.
Annex A (informative) provide a selection of number of sampling units.
Annex B (informative) provides examples of retention measurements.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12037:2023(Main)
Wood preservatives - Field test method for determining the relative protective effectiveness of a wood preservative exposed out of ground contact - Horizontal lap-joint method
EN 12037:2022

This document describes a method of test for wood preservatives that are intended for use in wood to be exposed to the weather out of contact with the ground without the additional protection of a surface coating.
The method is applicable to the testing of commercial or experimental preservatives applied by techniques appropriate to commercial practice. The method is applicable to chemical products used individually or in combination to prevent the development of decay and/or - optional - the development of disfiguring organisms in wood and, where suitable, in wood-based products.
NOTE 1   The method can also be used to test other treated wood species and naturally durable timbers. It can be adapted for testing the field performance of other wood based systems and treatments designed to enhance durability, for example treated or untreated wood based composites, timber treated with non-biocidal systems, chemically modified or heat treated timber.
NOTE 2   Altough the test is used to assess decay, it is possible to use the method to additionally assess stain or each separately when relevant.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14734:2022/AC:2023(Corrigendum)
Durability of wood and wood-based products - Determination of treatability of timber species to be impregnated with wood preservatives - Laboratory method
EN 14734:2022/AC:2023

This document specifies a laboratory method for the determination of the treatability of wood in order to determine the likely reaction of different wood species to impregnation with wood preservatives. It is also applicable to investigate variation between samples of the same species but of different origin.

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14734:2022(Main)
Durability of wood and wood-based products - Determination of treatability of timber species to be impregnated with wood preservatives - Laboratory method
EN 14734:2022

This document describes a laboratory method for the determination of the treatability of wood in order to determine the likely reaction of different wood species to impregnation with wood preservatives. It can also be used to investigate variation between samples of the same species but of different origin.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 17810:2022(Main)
Durability of wood and wood-based products - Interpretation document for standards related to efficacy requirements and specifications of wood preservatives
CEN/TR 17810:2022

This document is intended to facilitate the interpretation and use of the European Standards where the testing and specification of wood preservative products are described. It aims to assist users (manufacturers, specifiers, authorities, etc.) to correlate the choice of selected test methods, wood substrates and biological agents with the efficacy requirements of wood preservatives based on their claimed target organisms and end use. This document is a source of supplementary information to the relevant standards and cannot be used as a standalone document.

  • Technical report
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day