oSIST prEN ISO 5577:2024
(Main)Non-destructive testing - Ultrasonic testing - Vocabulary (ISO/DIS 5577:2024)
Non-destructive testing - Ultrasonic testing - Vocabulary (ISO/DIS 5577:2024)
ISO 5577:2017 defines the terms used in ultrasonic non-destructive testing and forms a common basis for standards and general use. This document does not cover terms used in ultrasonic testing with phased arrays.
NOTE Terms for phased array ultrasonic testing are defined in EN 16018.
Zerstörungsfreie Prüfung - Ultraschallprüfung - Begriffe (ISO/DIS 5577:2024)
Essais non destructifs - Contrôle par ultrasons - Vocabulaire (ISO/DIS 5577:2024)
ISO 5577:2017 définit les termes utilisés pour le contrôle non destructif par ultrasons et constitue une base commune pour les normes et l'usage général. Le présent document n'inclut pas les termes utilisés pour le contrôle par ultrasons en multiéléments.
NOTE Les termes applicables au contrôle par ultrasons en multiéléments sont définis dans l'EN 16018.
Neporušitvene preiskave - Preskušanje z ultrazvokom - Slovar (ISO/DIS 5577:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2024
Neporušitvene preiskave - Preskušanje z ultrazvokom - Slovar (ISO/DIS 5577:2024)
Non-destructive testing - Ultrasonic testing - Vocabulary (ISO/DIS 5577:2024)
Zerstörungsfreie Prüfung - Ultraschallprüfung - Begriffe (ISO/DIS 5577:2024)
Essais non destructifs - Contrôle par ultrasons - Vocabulaire (ISO/DIS 5577:2024)
Ta slovenski standard je istoveten z: prEN ISO 5577
ICS:
01.040.19 Preskušanje (Slovarji) Testing (Vocabularies)
19.100 Neporušitveno preskušanje Non-destructive testing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
International
Standard
ISO/DIS 5577
ISO/TC 135/SC 3
Non-destructive testing —
Secretariat: DIN
Ultrasonic testing — Vocabulary
Voting begins on:
Essais non destructifs — Contrôle par ultrasons — Vocabulaire
2024-09-05
Voting terminates on:
ICS: 19.100; 01.040.19
2024-11-28
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 5577:2024(en)
DRAFT
ISO/DIS 5577:2024(en)
International
Standard
ISO/DIS 5577
ISO/TC 135/SC 3
Non-destructive testing —
Secretariat: DIN
Ultrasonic testing — Vocabulary
Voting begins on:
Essais non destructifs — Contrôle par ultrasons — Vocabulaire
ICS: 19.100; 01.040.19 Voting terminates on:
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
This document is circulated as received from the committee secretariat. BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 5577:2024(en)
ii
ISO/DIS 5577:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Terms and definitions related to frequencies, waves and pulses . 1
4.1 Frequencies .1
4.2 Waves and pulses .3
4.3 Types of ultrasonic waves .5
5 Terms related to sound . 6
5.1 Sound generation and reception .6
5.2 Sound propagation .7
5.3 Loss of sound pressure .10
5.4 Ultrasonic waves at interfaces .10
6 Terms related to test equipment . 14
6.1 Instrument .14
6.2 Probes .16
6.3 Combined test equipment . 23
6.4 Instrument setting, reference blocks and test blocks .24
7 Terms related to ultrasonic testing .25
7.1 Testing techniques . 25
7.2 Test object . 30
7.3 Coupling .31
7.4 Reflectors .32
7.5 Signals and indications . 33
7.6 Presentations . 35
7.7 Location . 39
7.8 Evaluation of indications . 40
Bibliography .43
iii
ISO/DIS 5577:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 135, Non-destructive testing, Subcommittee SC
3, Ultrasonic testing.
This third edition cancels and replaces the second edition (ISO 5577:2017), which has been technically
revised.
The main changes are as follows:
— terms pulse overshoot, main lobe, main beam, side lobe, diffraction, contact surface, echo amplitude,
signal amplitude, full screen height were added,
— the term plate wave was replaced by Lamb wave,
— some definitions were modified.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
DRAFT International Standard ISO/DIS 5577:2024(en)
Non-destructive testing — Ultrasonic testing — Vocabulary
1 Scope
This document defines the terms used in ultrasonic non-destructive testing and forms a common basis for
standards and general use.
This document does not cover specific terms used in ultrasonic testing with arrays.
NOTE Terms used in ultrasonic testing with arrays are defined in ISO 23243.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the terms and definitions given in Clauses 4, 5, 6 and 7 for sound, test
equipment and ultrasonic testing apply apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
4 Terms and definitions related to frequencies, waves and pulses
4.1 Frequencies
4.1.1
frequency
number of cycles per second
Note 1 to entry: Expressed in Hertz (Hz).
4.1.2
nominal frequency
probe frequency
frequency (4.1.1) of the probe (6.2.1) as stated by the manufacturer
4.1.3
test frequency
effective ultrasonic frequency of a system used to test a material or object
4.1.4
frequency spectrum
distribution of amplitude (4.2.2) in relation to frequency (4.1.1)
Note 1 to entry: See Figure 1.
ISO/DIS 5577:2024(en)
4.1.5
centre frequency
arithmetic mean of the upper and lower cut-off frequencies
Note 1 to entry: See Figure 1.
4.1.6
peak frequency
frequency (4.1.1) at which the maximum amplitude is observed
Note 1 to entry: See Figure 1.
4.1.7
cut-off frequency
frequency (4.1.1) at which the amplitude (4.2.2) of the transmitted signal has dropped by a specified amount
from the amplitude at peak frequency (4.1.6), for example, by 3 dB
Note 1 to entry: See Figure 1.
4.1.8
bandwidth
width of the frequency spectrum (4.1.4) between the upper and lower
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.