SIST EN 13530-3:2002/A1:2005

Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3: Operational requirements

This European Standard specifies operational requirements for large transportable vacuum insulated cryogenic vessels of more than 1000 l volume.
This European Standard applies to vessels designed for cryogenic fluids specified in EN 13530-1.

Kryo-Behälter - Große ortsbewegliche vakuum-isolierte Behälter - Teil 3: Betriebsanforderungen

Récipients cryogéniques - Grands récipients transportables isolés sous vide - Partie 3: Exigences de service

Kriogene posode – Velike premične, vakuumsko izolirane posode – 3. del: Obratovalne zahteve

General Information

• Status: Withdrawn
• Publication Date: 31-Oct-2005
• Withdrawal Date: 11-Apr-2017
• ICS: 23.020.40 - Cryogenic vessels
• Technical Committee: TLP - Pressure vessels
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 30-Mar-2017
• Due Date: 22-Apr-2017
• Completion Date: 12-Apr-2017
• Directive: 94/55/EC - Transport of dangerous goods by road
• Directive: 96/49/EC - Transport of dangerous goods by rail
• Directive: 96/86/EC - Transport of dangerous goods by road (94/55/EC Dir. amendment)
• Directive: 96/87/EC - Transport of dangerous goods by rail (96/49/EC Dir. amendment)
• Mandate: M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
• Ref Project: EN 13530-3:2002/A1:2005 - Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3: Operational requirements

Relations

• Replaced By: SIST EN ISO 20421-2:2017 - Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 2: Operational requirements (ISO 20421-2:2017)
• Effective Date: 01-May-2017
• Amends: SIST EN 13530-3:2002 - Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3: Operational requirements
• Effective Date: 01-Nov-2005
• Amends: SIST EN 13530-3:2002 - Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3: Operational requirements
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13530-3:2002/A1:2005
01-november-2005
.ULRJHQHSRVRGH±9HOLNHSUHPLþQHYDNXXPVNRL]ROLUDQHSRVRGH±GHO
2EUDWRYDOQH]DKWHYH
Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3: Operational
requirements
Kryo-Behälter - Große ortsbewegliche vakuum-isolierte Behälter - Teil 3:
Betriebsanforderungen
Récipients cryogéniques - Grands récipients transportables isolés sous vide - Partie 3:
Exigences de service
Ta slovenski standard je istoveten z: EN 13530-3:2002/A1:2005
ICS:
23.020.40 Proti mrazu odporne posode Cryogenic vessels
(kriogenske posode)
SIST EN 13530-3:2002/A1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13530-3:2002/A1:2005

---------------------- Page: 2 ----------------------

SIST EN 13530-3:2002/A1:2005
EUROPEAN STANDARD
EN 13530-3:2002/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2005
ICS 23.020.40
English version
Cryogenic vessels - Large transportable vacuum insulated
vessels - Part 3: Operational requirements
Récipients cryogéniques - Grands récipients transportables Kryo-Behälter - Große ortsbewegliche vakuum-isolierte
isolés sous vide - Partie 3: Exigences de service Behälter - Teil 3: Betriebsanforderungen
This amendment A1 modifies the European Standard EN 13530-3:2002; it was approved by CEN on 19 May 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZ
...