SIST EN 14869-1:2004
(Main)Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified)
Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified)
This part of EN 14869 specifies a shear test for the characterization of adhesives in a bond. The shear stress/strain properties of the adhesive (including the shear modulus) are useful for advanced design work, e.g. in finite element analysis methods.
Strukturklebstoffe - Bestimmung des Scherverhaltens struktureller Klebungen - Teil 1: Torsionsprüfverfahren unter Verwendung stumpf verklebter Hohlzylinder (ISO 11003-1:2001, modifiziert)
Dieser Teil der EN 14869 legt eine Scherprüfung zur Charakterisierung von Klebstoffen in einer Klebung fest. Die Schubspannungs-Gleitungs-Eigenschaften eines Klebstoffes (einschließlich des Schubmoduls) sind für die Auslegung, z. B. bei Finite-Elemente-Methoden, von Nutzen.
Adhésifs structuraux - Détermination du comportement en cisaillement d'adhésifs structuraux - Partie 1: Méthode d'essai en torsion de cylindres creux collés bout a bout (ISO 11003-1:2001, modifiée)
Konstrukcijska lepila – Določanje strižnih lastnosti konstrukcijskih spojev – 1. del: Torzijski preskus z uporabo čelno lepljenih votlih cilindrov (ISO 11003-1:2001, spremenjen)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VSUHPHQMHQStrukturklebstoffe - Bestimmung des Scherverhaltens struktureller Klebungen
- Teil 1: Torsionsprüfverfahren unter Verwendung stumpf verklebter Hohlzylinder (ISO 11003-1:2001, modifiziert)Adhésifs structuraux - Détermination du comportement en cisaillement d'adhésifs structuraux - Partie 1: Méthode d'essai en torsion de cylindres creux collés bout a bout (ISO 11003-1:2001, modifiée)Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified)83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 14869-1:2004SIST EN 14869-1:2004en,fr,de01-oktober-2004SIST EN 14869-1:2004SLOVENSKI
STANDARD
SIST EN 14869-1:2004
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14869-1
July 2004 ICS 83.180
English version
Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified)
Adhésifs structuraux - Détermination du comportement en cisaillement d'adhésifs structuraux - Partie 1: Méthode d'essai en torsion de cylindres creux collés bout à bout (ISO 11003-1:2001, modifiée)
Strukturklebstoffe - Bestimmung des Scherverhaltens struktureller Klebungen
- Teil 1: Torsionsprüfverfahren unter Verwendung stumpf verklebter Hohlzylinder (ISO 11003-1:2001, modifiziert) This European Standard was approved by CEN on 16 April 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14869-1:2004: ESIST EN 14869-1:2004
EN 14869-1:2004 (E) 2 Contents Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Principle.4 5 Safety clause.4 6 Apparatus.4 7 Test specimen.7 7.1 Preparation.7 7.1.1 Substrate material.7 7.1.2 Preparation of the surface.7 7.1.3 Bonding.7 7.1.4 Adhesive bond.9 7.1.5 Dimensions.11 7.2 Number of specimens.11 8 Test conditions.11 8.1 Temperature.11 8.2 Shear rate.11 9 Procedure.12 10 Calculations.12 11 Precision.14 12 Test report.14 SIST EN 14869-1:2004
EN 14869-1:2004 (E) 3 Foreword The text of the International Standard from Technical Committee ISO/TC 61 “Plastics” of the International Organization for Standardization (ISO) has been taken over as a European Standard (EN 14869-1:2004) by Technical Committee CEN/TC 193, "Adhesives", the secretariat of which is held by AENOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2005, and conflicting national standards shall be withdrawn at the latest by January 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice The text of ISO 11003-1:2001 has been approved by CEN as a European Standard with agreed common modifications as given below: The title has been modified Clause 2 "Normative references" has been updated Clause 3 "Terms and definitions" is new Clause 5 "Safety clause" is new Figures 2 and 3 have changed Subclauses 7.1.4 Adhesive bond, 7.1.5 Dimensions and subclauses 10.2 and 10.3 have changed. SIST EN 14869-1:2004
EN 14869-1:2004 (E) 4
1 Scope This part of EN 14869 specifies a shear test for the characterization of adhesives in a bond. The shear stress/strain properties of the adhesive (including the shear modulus) are useful for advanced design work, e.g. in finite element analysis methods. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 923:1998, Adhesives – Terms and definitions. EN 13887, Structural adhesives – Guidelines for surface preparation of metals and plastics prior to adhesive bonding. EN ISO 291, Plastics — Standard atmospheres for conditioning and testing. EN ISO 10365, Adhesives - Designation of main failure patterns (ISO 10365:1992). 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 923:1998 apply. 4 Principle The shear deformation of the adhesive in an annular bond between two hollow cylinders, and the corresponding torque, are measured and recorded up to failure of the joint. 5 Safety clause The users of this standard shall be familiar with normal laboratory practice. This standard does not purport to address all safety problems, if any, associated with its use. It is the responsibility of the user to establish safety and health practices and to ensure compliance with any European and national regulatory conditions. 6 Apparatus 6.1 Torsion-testing machine, with a capacity of at least 300 N·m and preferably of 1 000 N·m. Alternatively, a suitably adapted tensile-testing machine may be used. The machine shall include equipment for recording the torque instantaneously with an error of less than 1%. The gripping heads shall be accurately aligned and, if no hydraulic gripping mechanis
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.