EN 14869-1:2004

Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified)

This part of EN 14869 specifies a shear test for the characterization of adhesives in a bond. The shear stress/strain properties of the adhesive (including the shear modulus) are useful for advanced design work, e.g. in finite element analysis methods.

Strukturklebstoffe - Bestimmung des Scherverhaltens struktureller Klebungen - Teil 1: Torsionsprüfverfahren unter Verwendung stumpf verklebter Hohlzylinder (ISO 11003-1:2001, modifiziert)

Dieser Teil der EN 14869 legt eine Scherprüfung zur Charakterisierung von Klebstoffen in einer Klebung fest. Die Schubspannungs-Gleitungs-Eigenschaften eines Klebstoffes (einschließlich des Schubmoduls) sind für die Auslegung, z. B. bei Finite-Elemente-Methoden, von Nutzen.

Adhésifs structuraux - Détermination du comportement en cisaillement d'adhésifs structuraux - Partie 1: Méthode d'essai en torsion de cylindres creux collés bout à bout (ISO 11003-1:2001, modifiée)

Konstrukcijska lepila – Določanje strižnih lastnosti konstrukcijskih spojev – 1. del: Torzijski preskus z uporabo čelno lepljenih votlih cilindrov (ISO 11003-1:2001, spremenjen)

General Information

• Status: Withdrawn
• Publication Date: 20-Jul-2004
• Withdrawal Date: 10-May-2011
• ICS: 83.180 - Adhesives
• Technical Committee: CEN/TC 193 - Adhesives
• Drafting Committee: CEN/TC 193/WG 2 - Structural adhesives
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 11-May-2011
• Completion Date: 11-May-2011
• Ref Project: SIST EN 14869-1:2004 - Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified)

Relations

• Replaced By: EN 14869-1:2011 - Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified)
• Effective Date: 14-May-2011

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VSUHPHQMHQStrukturklebstoffe - Bestimmung des Scherverhaltens struktureller Klebungen
- Teil 1: Torsionsprüfverfahren unter Verwendung stumpf verklebter Hohlzylinder (ISO 11003-1:2001, modifiziert)Adhésifs structuraux - Détermination du comportement en cisaillement d'adhésifs structuraux - Partie 1: Méthode d'essai en torsion de cylindres creux collés bout a bout (ISO 11003-1:2001, modifiée)Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified)83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 14869-1:2004SIST EN 14869-1:2004en,fr,de01-oktober-2004SIST EN 14869-1:2004SLOVENSKI
STANDARD



SIST EN 14869-1:2004



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14869-1
July 2004 ICS 83.180
English version
Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified)
Adhésifs structuraux - Détermination du comportement en cisaillement d'adhésifs structuraux - Partie 1: Méthode d'essai en torsion de cylindres creux collés bout à bout (ISO 11003-1:2001, modifiée)
Strukturklebstoffe - Bestimmung des Scherverhaltens struktureller Klebungen
- Teil 1: Torsionsprüfverfahren unter Verwendung stumpf verklebter Hohlzylinder (ISO 11003-1:2001, modifiziert) This European Standard was approved by CEN on 16 April 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14869-1:2004: ESIST EN 14869-1:2004



EN 14869-1:2004 (E) 2 Contents Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Principle.4 5 Safety clause.4 6 Apparatus.4 7 Test specimen.7 7.1 Preparation.7 7.1.1 Substrate material.7 7.1.2 Preparation of the surface.7 7.1.3 Bonding.7 7.1.4 Adhesive bond.
...