SIST EN 14869-1:2011
(Main)Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified)
Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified)
This European Standard specifies a shear test for the characterization of adhesives in a bond. The shear stress/strain properties of the adhesive (including the shear modulus) are useful for advanced design work, e.g. in finite element analysis methods.
Strukturklebstoffe - Bestimmung des Scherverhaltens struktureller Klebungen - Teil 1: Torsionsprüfverfahren unter Verwendung stumpf verklebter Hohlzylinder (ISO 11003-1:2001, modifiziert)
Diese Europäische Norm legt eine Scherprüfung zur Charakterisierung von Klebstoffen in einer Klebung fest. Das Schubspannungs-Gleitungs-Verhalten eines Klebstoffes (einschließlich des Schubmoduls) ist für die Auslegung, z. B. bei Finite-Elemente-Methoden, von Nutzen.
Adhésifs structuraux - Détermination du comportement en cisaillement de collages structuraux - Partie 1 : Méthode d'essai en torsion de cylindres creux collés bout à bout (ISO 11003-1:2001 Modifié)
La présente Norme européenne spécifie un essai de cisaillement pour la caractérisation des adhésifs dans un
joint. Les caractéristiques contrainte/déformation de l’adhésif en cisaillement (y compris le module de
cisaillement) sont utiles pour des travaux de conception précis, par exemple, dans le cas de méthodes
d’analyse par la méthode des éléments finis.
Konstrukcijska lepila - Določanje strižnih lastnosti konstrukcijskih spojev - 1. del: Torzijski preskus z uporabo čelno lepljenih votlih cilindrov (ISO 11003-1:2001, spremenjen)
Ta evropski standard določa strižni preskus za opredelitev lastnosti lepil v spojih. Strižne lastnosti napetosti/raztezka lepila (vključno s strižnimi moduli) so uporabne za napredno načrtovanje, npr. pri metodah analize končnih elementov.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VSUHPHQMHQStrukturklebstoffe - Bestimmung des Scherverhaltens struktureller Klebungen - Teil 1: Torsionsprüfverfahren unter Verwendung stumpf verklebter Hohlzylinder (ISO 11003-1:2001, modifiziert)Adhésifs structuraux - Détermination du comportement en cisaillement de collages structuraux - Partie 1 : Méthode d'essai en torsion de cylindres creux collés bout à bout (ISO 11003-1:2001 Modifié)Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified)83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 14869-1:2011SIST EN 14869-1:2011en,de01-julij-2011SIST EN 14869-1:2011SLOVENSKI
STANDARDSIST EN 14869-1:20041DGRPHãþD
SIST EN 14869-1:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14869-1
May 2011 ICS 83.180 Supersedes EN 14869-1:2004English Version
Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified)
Adhésifs structuraux - Détermination du comportement en cisaillement de collages structuraux - Partie 1 : Méthode d'essai en torsion de cylindres creux collés bout à bout (ISO 11003-1:2001, modifié)
Strukturklebstoffe - Bestimmung des Scherverhaltens struktureller Klebungen - Teil 1: Torsionsprüfverfahren unter Verwendung stumpf verklebter Hohlzylinder (ISO 11003-1:2001, modifiziert) This European Standard was approved by CEN on 10 March 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14869-1:2011: ESIST EN 14869-1:2011
EN 14869-1:2011 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Principle .45 Apparatus .46 Test specimen .66.1 Preparation .66.1.1 Substrate material.66.1.2 Preparation of the surface .66.1.3 Bonding .66.1.4 Adhesive bond .86.1.5 Dimensions . 106.2 Number of specimens . 107 Test conditions . 107.1 Temperature . 107.2 Shear rate . 108 Procedure . 119 Calculations . 1110 Precision . 1311 Test report . 13 SIST EN 14869-1:2011
EN 14869-1:2011 (E) 3 Foreword This document (EN 14869-1:2011) has been prepared by Technical Committee CEN/TC 193 “Adhesives”, the secretariat of which is held by AENOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2011, and conflicting national standards shall be withdrawn at the latest by November 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14869-1:2004. SAFETY STATEMENT — Persons using this document should be familiar with the normal laboratory practice, if applicable. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. ENVIRONMENTAL STATEMENT — It is understood that some of the material permitted in this standard may have negative environmental impact. As technological advantages lead to acceptable alternatives for these materials, they will be eliminated from this standard to the extent possible. At the end of the test, the user of the standard should take care to carry out an appropriate disposal of the wastes, according to local regulation. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 14869-1:2011
EN 14869-1:2011 (E) 4 1 Scope This European Standard specifies a shear test for the characterization of adhesives in a bond. The shear stress/strain properties of the adhesive (including the shear modulus) are useful for advanced design work, e.g. in finite element analysis methods. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 923:2005+A1:2008, Adhesives
Terms and definitions EN 13887, Structural Adhesives
Guidelines for surface preparation of metals and plastics prior to adhesive bonding EN ISO 291, Plastics
Standard atmospheres for conditioning and testing (ISO 291:2008) EN ISO 10365, Adhesives
Designation of main failure patterns (ISO 10365:1992) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 923:2005+A1:2008 apply. 4 Principle The shear deformation of the adhesive in an annular bond between two hollow cylinders, and the corresponding torque, are measured and recorded up to failure of the joint. 5 Apparatus 5.1 Torsion-testing machine, with a capacity of at least 300 N·m and preferably of 1 000 N·m. Alternatively, a suitably adapted tensile-testing machine may be used. The machine shall include equipment for recording the torque instantaneously with an error of less than 1 %. The gripping heads shall be accurately aligned and, if no hydraulic gripping mechanism is available, all bolts and holes shall be pre
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VSUHPHQMHQStrukturklebstoffe - Bestimmung des Scherverhaltens struktureller Klebungen - Teil 1: Torsionsprüfverfahren unter Verwendung stumpf verklebter Hohlzylinder (ISO 11003-1:2001, modifiziert)Adhésifs structuraux - Détermination du comportement en cisaillement de collages structuraux - Partie 1 : Méthode d'essai en torsion de cylindres creux collés bout à bout (ISO 11003-1:2001 Modifié)Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001 Modified)83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:FprEN 14869-1kSIST FprEN 14869-1:2010en,fr,de01-december-2010kSIST FprEN 14869-1:2010SLOVENSKI
STANDARD
kSIST FprEN 14869-1:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 14869-1
September 2010 ICS 83.180 Will supersede EN 14869-1:2004English Version
Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001 Modified)
Adhésifs structuraux - Détermination du comportement en cisaillement de collages structuraux - Partie 1 : Méthode d'essai en torsion de cylindres creux collés bout à bout (ISO 11003-1:2001 Modifié)
Strukturklebstoffe - Bestimmung des Scherverhaltens struktureller Klebungen - Teil 1: Torsionsprüfverfahren unter Verwendung stumpf verklebter Hohlzylinder (ISO 11003-1:2001, modifiziert) This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 193.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 14869-1:2010: EkSIST FprEN 14869-1:2010
FprEN 14869-1:2010 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Principle .45 Apparatus .46 Test specimen .66.1 Preparation .66.1.1 Substrate material.66.1.2 Preparation of the surface .66.1.3 Bonding .66.1.4 Adhesive bond .86.1.5 Dimensions . 106.2 Number of specimens . 107 Test conditions . 107.1 Temperature . 107.2 Shear rate . 108 Procedure . 119 Calculations . 1110 Precision . 1311 Test report . 13 kSIST FprEN 14869-1:2010
FprEN 14869-1:2010 (E) 3 Foreword This document (FprEN 14869-1:2010) has been prepared by Technical Committee CEN/TC 193 “Adhesives”, the secretariat of which is held by AENOR. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 14869-1:2004. SAFETY STATEMENT — Persons using this document should be familiar with the normal laboratory practice, if applicable. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. ENVIRONMENTAL STATEMENT — It is understood that some of the material permitted in this standard may have negative environmental impact. As technological advantages lead to acceptable alternatives for these materials, they will be eliminated from this standard to the extent possible. At the end of the test, the user of the standard should take care to carry out an appropriate disposal of the wastes, according to local regulation. kSIST FprEN 14869-1:2010
FprEN 14869-1:2010 (E) 4 1 Scope This European Standard specifies a shear test for the characterization of adhesives in a bond. The shear stress/strain properties of the adhesive (including the shear modulus) are useful for advanced design work, e.g. in finite element analysis methods. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 923:2005+A1:2008, Adhesives
Terms and definitions EN 13887, Structural Adhesives
Guidelines for surface preparation of metals and plastics prior to adhesive bonding EN ISO 291, Plastics
Standard atmospheres for conditioning and testing (ISO 291:2008) EN ISO 10365, Adhesives
Designation of main failure patterns (ISO 10365:1992) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 923:2005+A1:2008 apply. 4 Principle The shear deformation of the adhesive in an annular bond between two hollow cylinders, and the corresponding torque, are measured and recorded up to failure of the joint. 5 Apparatus 5.1 Torsion-testing machine, with a capacity of at least 300 N·m and preferably of 1 000 N·m. Alternatively, a suitably adapted tensile-testing machine may be used. The machine shall include equipment for recording the torque instantaneously with an error of less than 1 %. The gripping heads shall be accurately aligned and, if no hydraulic gripping mechanism is available, all bolts and holes shall be precisely machined so that the specimens are mounted in the apparatus and tested free of uncontrolled loads. The machine shall be equipped with an adequately thermostatted chamber if tests are to be carried out at temperatures different from the ambient temperatu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.